Ready-made projects of aerated concrete cottages. Projects of houses from aerated concrete. What is aerated concrete and what are its advantages

The specialization of the company "DOM BETON" is the construction of houses and cottages from aerated concrete blocks supplied to us directly from the leaders in the industry: Xella (Ytong), Poritep, Bonolit, ECO, Aerostone, El-Block, DSK, etc. We give a guarantee for all types construction work and materials used.

Our catalog contains ready-made projects of aerated concrete houses, among which each of our clients will be able to choose the best one. In order to make it more convenient for our customers, we can change the layout of any house at will and individual requirements, and if the need arises, our specialists are ready to develop a fully original project at democratic prices. In the case of the conclusion of a contract for the construction of a house project is provided free of charge.

Projects of houses from the company "DOM BETON"

Projects of houses from aerated concrete blocks from the company LLC "DOM BETON" - this is one of the most best options for those planning suburban construction. In our database you can find a lot of different ready-made projects of aerated concrete houses or order the development individual project private cottage.

If you have chosen aerated concrete as an environmentally friendly, light and energy-efficient and fireproof material, then our specialists are ready to provide full consultations regarding the choice of the optimal project in terms of cost and parameters.

Depending on how the house will be operated - for seasonal or permanent residence– we are ready to offer you projects of inexpensive aerated concrete houses with a garage, ground floor, outbuildings. Regardless of which project you choose, we guarantee that the house will be built with high quality and from materials from trusted suppliers.

Aerated concrete house project - the best choice

One of the most important characteristics of aerated concrete is its low thermal conductivity. It is worth saying that this material is three times warmer than a brick, twice - ceramic blocks and eight - monolithic concrete structures. At the same time, aerated concrete blocks are significantly lighter than other materials, due to which the total weight of the structure is reduced, which means that you can save on the arrangement of the foundation. Special attention deserves the fact that aerated concrete is produced only from natural components, due to which it is environmentally friendly pure material- it is absolutely safe to build private houses from it.

An important advantage of aerated concrete blocks is their correct and precise geometry, so you can abandon the usual cement-sand mortar and use special glue, the thickness of the seams will be only 1-3 mm. The use of such adhesive solutions allows not only to save, but also to reduce the number of "cold bridges". A house built of aerated concrete blocks is distinguished by the preservation of a comfortable temperature regime- it is warm in winter and cool in summer, so you can get significant savings on heating and air conditioning.

In our office you can get professional advice from experts on what aerated concrete is, what features of its use and what needs to be considered before construction.

If you are planning to order a project and build a cottage from aerated concrete, then you should entrust everything construction works specialists of our company "HOUSE BETON". We are ready to provide you with all the necessary technical documentation for the materials used and build a house according to the standards of all building codes and rules.

Finished projects houses suggest many options for building materials as the main material for walls - ceramic block, aerated concrete blocks, timber, monolith, wood concrete, etc. Why should you opt for aerated concrete blocks? Cause you get easy but durable material at a low price, which is quick and easy to work with. The strict geometry of the lines of cellular concrete allows you to get almost perfect even walls, which greatly simplifies the subsequent interior finishing, while reducing the cost of consumables.

Aerated concrete and gas silicate - what is the difference?

Despite the similarity in name and composition, the difference between these two building materials is very significant, it is worth remembering if you decide to buy ready-made aerated concrete house designs. In aerated concrete blocks, the leading component is cement, which gives a dark gray color. finished product and increases its strength. The gas silicate is mostly composed of quartz sand, as well as lime, have light shade and have higher moisture absorption.

The external walls of finished projects of houses made of aerated concrete must be protected from exposure to excessive moisture, but before that they must be insulated. The process of warming has its own characteristics. After erecting the box, it is necessary to cover it with a moisture-proof film and provide reliable waterproofing for several months. This is necessary to dry the blocks if they were not provided with adequate moisture protection at the time of laying.

When the structure dries, you can begin to insulate the building with vapor-permeable materials. The best choice here will become mineral wool. It is attached to a wall previously cleaned of dirt and dust. special composition. Then fiberglass is glued to this layer, which has a reinforcing role. And only then do they start finishing. This can be done by plastering or paneling the wall, facing brick, others decorative materials, giving preference to vapor-permeable.

Same material, different sizes

Projects of houses made of aerated concrete are popular with developers for another reason. The technology of their production allows to produce a product different size, and having a difference in technical specifications. This approach enables workers to choose the desired shape and thickness of the product when laying external and interior walls projects of houses from aerated concrete. Cellular concrete is produced in widths from 75 mm to 500 mm, height is 200-250 mm, and length is 500-625 mm. This building material can have not only a rectangular, but also a U-shape used in the construction of lintels.

The best choice for the main (bearing) walls of the cottage will be a material that has excellent thermal insulation and strength, with a relatively low weight. Autoclaved aerated concrete of class D500 and D400 became such a compromise. The marking has its own interpretation, where D is the designation of density or bulk density (how much material is in a given volume), and the digital value 500 and 400 is the density of the product in a dry state, respectively 500kg/m3 and 400kg/m3. Higher density aerated concrete will be stronger in strength, but less warm. Conversely, the higher thermal insulation properties material, the less durable it will be. Considered by us cellular concrete grades D500 and D400 has a compressive strength of 35 cm/m2 and 25 cm/m2, which is optimal and determines the choice of developers.

The construction of houses from aerated concrete allows you to implement almost any project. From this material, you can build a house based on the preferences of the customer, different area and number of storeys (up to 3 floors).

Projects of houses and cottages made of aerated concrete are a favorite among potential developers, because. have a number of advantages: speed of construction and relatively low cost. Among the characteristic properties of aerated concrete, it should be noted the small weight of the blocks themselves, sufficient thermal insulation properties and fire safety. Consider the properties of this material in more detail.

Projects of houses from aerated concrete. Advantages

Thanks to innovative technologies and modern building materials, in this case - aerated concrete blocks, the construction time of the facility is minimal. The customer wins in time - and this also reduces the cost of construction. If you choose the material for the house, taking into account the time frame, then in terms of the speed of construction, aerated concrete objects are second only to frame structures. Immediately after the construction of the box at home, you can begin installation engineering communications and start internal finishing work, a facade work can be transferred. Important - interior work should be carried out in conditions of constant ventilation of the room.

Another advantage of aerated concrete blocks is the possibility of construction at any time of the year. With the help of special glue, the walls are a monolith. The absence of seams prevents heat loss. And though aerated concrete houses they warm up longer than wooden ones, but also retain heat and a favorable microclimate of housing longer. In addition to the above, this building material "breathes", which is very important if people live in such a house on a permanent basis.

On our website you can view and buy projects of aerated concrete houses. Do not think that by purchasing a finished project, you will deprive your home of individuality. Almost all types of modern finishing materials can be used for walls made of this material, which allows you to create a truly unique look of the house, taking into account the preferences of the client. The only thing when finishing the facade should be created between the walls and finishing material air cushion - this will prevent dampening of the walls and the appearance of condensate, which significantly reduce the thermal insulation properties.

And yet - choosing a house of aerated concrete blocks, you get a fireproof object. This material does not burn and, unlike ordinary concrete, is not radioactive due to the absence of granite in the composition.

Features of aerated concrete houses

Before you buy projects of aerated concrete houses, you should pay attention to the brand of material, which depends on the method of its manufacture. So, autoclaved aerated concrete has sufficient strength and is usually used for the construction of lintels, floor slabs, etc., while non-autoclaved - for construction internal partitions and bearing walls. In addition to the above, aerated concrete blocks are easy to process, which allows you to embody the most daring design solutions- decorate the house with arches and turrets, all kinds of decorative elements, and sound and heat insulation properties will save on decoration and heating of the future home of your dreams.

Projects of houses made of aerated concrete, developed by our specialists, can be adapted according to the wishes of the customer and the terrain features of the site, or created from scratch. Undoubted advantages such as environmental friendliness and strength, lightness and thermal insulation make this material more and more popular among budget options for building a house.

To date, there are many materials for the construction of walls. In addition, construction technology is always only being improved, which ultimately leads to the emergence of new building materials with more favorable price and operational characteristics. Thus, society has gradually reached the gas block, which can really please a lot.

First Benefits this material visible at the design stage. We will talk about all the pros and cons, as well as how to build a structure from aerated concrete blocks with our own hands, in this article.

Advantages and disadvantages

Aerated concrete blocks have a number of their features, both positive and not so. The thing is that the material is affordable, anyone can buy it, and you need to work hard with it so that the house can stand freely. long years.

Photos of gas-block houses can often be seen in social networks, since this material is really in great demand. It's all about its advantages, and these include:

  • strength;
  • convenient in work;
  • durability;
  • economy;
  • thermal insulation qualities.





Many doubt the strength of the gas block, but there is no reason for doubt at all. Material by appearance resembles a brick, only in larger sizes. It is a dense structure that, with proper care, does not collapse long time, guarantee period service - from thirty years.

Most often, the material is used for the construction of temporary buildings, as well as commercial premises. Many are wondering what better foam block or a gas block for the house, but as practice shows, in terms of quality there are no complaints equally to either one or the other option.

But this does not mean at all that the material is not suitable for the construction of residential buildings. It's all about maintenance and proper construction, but multi-storey building it is not recommended to build from a gas block.

The material does not crumble, which makes it really convenient to work with, it is also light, you can freely lift it with your hands and build walls. Building a house from a gas block is a pleasure, according to experienced builders.

As for durability, the gas block is really durable with proper care. It all depends on weather conditions where the building is planned to be erected. Without protection from water, the house will serve faithfully for decades, but if the building is protected from moisture, it can last for centuries. It is recommended to perform the procedure at the construction stage.

Gozoblok is distinguished by its economy both in the purchase of material and in its further use. This material is considered one of the cheapest, since it is not so complicated technology that is used in its manufacture.

In addition, there are many material suppliers on the market that compete well with each other, which ultimately leads to low material costs. In addition, you can save a lot on heating. Practice has shown that owners of houses built from other materials pay much more for heating.

This is because the gas block has excellent heat-insulating qualities. Works on both sides - does not release warm air from the inside and let the cold in from the outside.

A wall made of a gas block must be improved, since under the influence of weather conditions everything thermal insulation advantages will disappear over time. Experts recommend thinking about this at the design stage.





Phased construction of a house from aerated concrete blocks

As already mentioned, building a house from a gas block is not difficult, and basic building skills are enough. For self-construction, it is recommended to use the gas block calculator for the house.

The design of such a building is not much different from buildings made of other materials and includes the following stages of work:

  • site selection;
  • design;
  • foundation laying;
  • walling;
  • finishing.

When choosing a site, it is important to pay attention to the soil. In general, gas block walls are not heavy in themselves, so there are no special requirements for the soil.

However, do not forget that this is still a house and land plot must be selected suitable for construction. Most often, such houses are built on summer cottages, but can also be found in cities - in both cases this is permissible.

At the design stage, you need to figure out the area of ​​\u200b\u200bthe house, decide how many rooms there will be. It is not recommended to build huge buildings, although the foundation allows this.

Maintaining the building in the right state is much more difficult, and it also complicates the conduct of communications, which are also considered at the design stage. It is also better to immediately calculate how many gas blocks you need for a house.

It's best to take this step seriously, as it's easy to calculate the amount of variant to use, as well as consider various options savings or choose ready-made options projects of houses from gas blocks.

Laying the foundation will require a little more knowledge as well as effort. This stage is considered the most difficult and is no exception in working with gas-block houses.

It is recommended to seek help from professionals who will help build a truly reliable foundation that can hold the structure for many years, or immediately order a house from turnkey gas blocks.

Building walls isn't hard. Cottage from a gas block is built in general in a matter of time. It is important to observe the evenness of the masonry so that there are no inclinations. Since aerated concrete blocks themselves are light, folding them into one structure is not a difficult task.

You will need basic building skills to complete these steps. Be sure to take into account the connectors in the walls for windows and doors, ventilation and communications, so that later you do not have to destroy the newly built wall.

Finishing work is considered the most expensive occupation that can only be imagined in the construction of gas-block houses. Interior decoration can be made of any materials, but it is important to recall the fear of water blocks. Moisture can come not only from the street, but also from inside the room, so you need to think about protection from moisture even at the finishing stage.

In summing up, it is important to note the latter - you need to understand which best gas block for construction. To date, there are many manufacturers who can offer many options for the same building material. Therefore, be sure to contact the manufacturer, you need to find out the differences, as well as all the advantages of one block from another.






Photos of houses from the gas block

Porous aerated concrete blocks are ideal for construction country houses and dachas. Their cost is low, and the process itself is not too complicated, so many can afford a gas-block cottage.

In order not to spend money on the development of an individual project, you can use ready-made proposals. All you need to do is choose the house you like and get to work. But first, you should weigh the pros and cons of cottages, in the construction of which aerated concrete blocks are used.

Features of the construction of aerated concrete

Numerous air pores inside gas blocks turn them into effective insulation. A wall folded in 1-2 blocks can keep the temperature during indoor areas without additional thermal insulation. At the same time, a house made of aerated concrete with correct finish perfectly "breathes", maintaining a comfortable microclimate inside.

The gas block, due to its structure, also prevents the penetration of noise from the outside. Quite loud sounds up to 60 dB no longer pass through a wall thickness of only 30 cm. And the light weight of the walls allows you to lay a shallow and economical foundation in the project of a two-story house made of gas blocks.

The only thing you will need to take care of is to protect the concrete from moisture. To do this, the facades of cottages are usually finished with light breathable plaster, which does not allow water to pass to the surface of the gas blocks. Otherwise, building a house is even easier than building brick buildings– large dimensions of wall blocks speed up masonry work 2-2.5 times.

Project Search

Before you start building a house, you will have to start designing it. Technical documentation is needed not only for coordination in all instances. With its help, it is easier to control the consumption of materials, the correct implementation of the project, and also to think over hundreds of little things, on which the comfort of the residents will subsequently depend.

Even if you intend to build a house with your own hands, a carefully drawn up scheme will help to avoid mistakes and unnecessary expenses. The only question is who to entrust the design.

There are three options here:

1. It is most reliable to order a project from a bureau or firm. The design, carried out by specialists, guarantees an accurate calculation of the object and hassle-free paperwork during its registration. In addition, the construction of a house using gas blocks requires a balance between the strength and heat-saving characteristics of the bearing walls.

2. Ready-made projects of houses - they are purchased in the same companies separately or immediately ordered with the construction of a typical object. In terms of price / result, this is the most profitable way.

3. A budget option also involves the use of ready-made sketches. They will be found on public resources, we will offer some plans in the framework of this article. Such projects of aerated concrete houses can be changed at your discretion, for example, build on an attic or add a garage when designing.

Description of different layouts

1. One-story house of gas blocks for three rooms.

House project up to 150 sq. m due to its compact form can be placed even on a standard suburban area. Three living rooms can comfortably accommodate 3-4 people. The dining area, regardless of the orientation of the house, will be very bright, as it is surrounded by 6 windows on three sides. The dining room and the kitchen adjacent to the living room have access to a spacious summer terrace.

The project of a one-story aerated concrete cottage includes three entrances - the main one from the porch and two high single-leaf windows with reverse side at home (in the living room and small bedroom).

Immediately at the entrance, on both sides of the large hallway, there are household services:

  • combined bathroom;
  • boiler room;
  • kitchen.

This position facilitates wiring engineering networks in a cottage made of gas blocks.

Projects of country houses from aerated concrete blocks in two floors are also popular. They allow for small area land to build a spacious cottage for big family, for example, with two children of different sexes or different ages. There will be a place in it for guests.

Here convenient scheme building with total area 153 m2:

Ground floor (aerocrete blocks and Ytong floors):

  • Hall complex layout - the key to the whole house. You can immediately get into the guest room (9 m2), the large living room (30 m2) and the kitchen combined with the dining room (18 m2). There is also a staircase and a small bathroom with a shower.
  • In the household room (according to the plan, it is allocated 7 m2), which can serve as a laundry room or a mini-boiler room, if the cottage is intended for year-round use, they get from the bathroom.
  • The living room and kitchen each have a pair of tall, floor-to-ceiling casement windows overlooking the backyard.

Second floor project:

  • Three separate master bedrooms - one "parent" with an area of ​​19 m2 with open doors through a short staircase hall lets you hear what's going on in the small nursery opposite. For a family with a newborn baby, this is a big plus.
  • The second bedroom of 18 m2 can be given to older children.
  • On the attic floor there is another combined bathroom with a size of 10 squares. Here it was possible to place not only a shower cabin, but also a full-fledged bath.

3. Spacious cottage of 215 m2 from gas blocks.

Interesting options for houses with a garage and an attic. Let's take a closer look at such a complex project.

First of all, the capacious garage with an area of ​​​​almost 19 squares attracts attention. From here there is an exit to utility room the first level, and from there you can immediately go into a small corridor leading to the stairs. According to the project, the house has two open terraces: from the main entrance leads to the house itself, and the second one is located in the backyard.

First floor:

  • The number of rooms located at the very entrance to the aerated concrete house is rather big. The cut-off vestibule allows you to delay cold air from the street through next door you can go to the central hall.
  • From here you have access to small bathroom, garage storage, kitchen or guest bedroom.
  • A wide passage connects the hall with a spacious living room of 30 m2. Its real decoration is panoramic glazing rounded corner overlooking the second terrace.
  • The living room and kitchen-dining room are essentially one huge room. complex shape separated only by a small partition. But in meaning they are separated by a continuation of the passage from the central hall.

Second floor:

  • The staircase leads to the same spacious hall as on the first floor. And from here you can already get into any room.
  • Four bedrooms of 11, 11.5, 13.5 and 17 square meters guarantee each family member their own living space. In such a house it will be convenient even big families where three generations live together.
  • The bathroom and the bathroom on the second floor are separated, which is very convenient if residents take procedures at about the same time.

4. Scheme of a gas-block house with a garage.

If the family is not too big - only 3-4 people, or the size of the plots in the village does not allow building one-story block houses large area, you can choose a relatively simple but roomy project.

First floor:

  • The entrance from the porch leads to a vestibule measuring 4.3 m2. There is also a door from the adjacent garage.
  • From the vestibule they enter a common hall connected to a bathroom, a kitchen-dining room and a free opening to the living room.
  • The second passage connects the living room and kitchen.
  • From the living room, wide glazed doors lead to the terrace, and in the corner there is a staircase to the upper floor.

Attic:

  • There are only two bedrooms 17.4 and 9.3 m2, as well as a bathroom.
  • At the attic level, just above the garage, 6 square meters remain free space that can be taken under the attic.

On the example of the considered projects, we made sure that one-story and two-storey houses, complex buildings with an attic and a garage from a gas block are no more difficult to fold than from any other material. It is possible to build from aerated concrete and radius walls.

For self-construction, Ytong aerated concrete blocks are perfect correct form or with tongue-and-groove lock. With their low density of only 400 kg / m3, they have the necessary strength corresponding to class B2.5.

If, for some reason, the considered plans are not suitable, and you have firmly decided to build a house using aerated concrete, you can take any idea proposed for other materials as a basis. Everything that is being built from brick, wood or solid concrete monolith is quite "able" and gas blocks.

Fitting © 2022 Design and interior of apartments