How to wash very dirty plastic windows - choosing the best way. How to clean plastic windows

Immediately after installation plastic windows look attractive, decorating the room with their snow-white appearance. Over time, dirt from accumulated dust, traces of cups and flower vases. Frames may show black buildup of mold or simply yellow. Housewives are trying to wash and even bleach the plastic. But in order not to make things worse, you need to know exactly how to clean plastic windows without damaging their surface.

The window sill is most often contaminated. On the horizontal surface more dust settles and it is sometimes used as a stand for various items, resulting in many stubborn dirt spots. Before washing the window sill, it is better to remove the side decorative plugs from it. This will eliminate the accumulation of small particles of dirt at the joints. A stain-free surface can simply be washed with a microfiber cloth dipped in warm water. Then wipe dry to avoid streaks.

To clear old spots or traces after repair, you will have to resort to the use of cleaning products. They are best purchased at the store, but you can cook at home.

Home Cleaning Products

Extraneous factors often contribute to the manifestation of yellowness or gray spots. This includes sunlight, temperature changes, or simply a change in the structure of the impurities added to the plastic.

All these unpleasant traces are easy to clean with home remedies:

These simple means, available in every housewife, will help keep PVC window sills clean.

Industrial cleaners

For people who do not trust home remedies, manufacturers household chemicals offer a variety of cleaning pastes, solutions and powders. But they can be no less dangerous for plastic if used unwisely, plus they can cause allergic irritation of the skin of the hands.

Of the most popular products that can be used to clean a PVC window sill, the following stand out:

Sometimes the hostesses try to clean heavily dirty surfaces with powders intended for caring for hobs. Yes, they are effective, but before washing the window sill with powder, you need to make sure that there are no abrasive substances in its composition. Solid particles will leave many scratches, ruining appearance.

To wash PVC frames, almost the same means are used as for window sills, since the material to be cleaned is homogeneous. If after the repair of the apartment you have to wash the frame just installed windows, must be removed protective film. Over time, it will stick and it will be problematic to remove it. After that, ordinary dirt is washed off with water with the addition of laundry soap, dishwashing liquid or washing powder. It is important that any composition does not contain acids and abrasives. Even on new frames can appear small scratches. They are easy to hide by treating the area with a polish.

Shop products for the care of PVC frames

You can clean the PVC frame with the same “Mr. Proper" or similar means used for window sills. However, this list can be slightly expanded:

Domestos gel, specially developed for toilets and baths, is able to whiten yellowed frames;
the basis of the cream "Pemolux" is soda. It is safe for PVC surface and can easily clean stubborn dirt after repair;
it is good to wash off grease from kitchen frames with Comet gel. When using it, it is diluted at the rate of 60 ml of the drug per 5 liters of water;
Cream "Mr Muscle" will help whiten the frames. Rub the PVC surface with the preparation and wash it off with a wet sponge after 3 minutes.

Using any chemistry, one must remember about safety measures and use personal protective equipment.

Folk remedies for the care of PVC frames

You can clean PVC frames at home, as well as window sills, using folk remedies. Let's look at two of the most popular recipes:

Equal proportions of chalk and tooth powder are diluted with water to form a paste. This mixture is applied to a dirty surface and after drying, simply wipe it with a dry soft cloth.
To remove a stubborn stain, sprinkle it with soda and immediately rub it with a sponge dipped in vinegar. The resulting reaction will clean out the dirt, after which the frame must be washed clean water.

Using an unfamiliar folk remedy, you must first test it on small plot and then rub it all over the frame.

Removal of aggressive stains

Often after renovation pvc windows aggressive traces remain, which are not always amenable to removal by store and home remedies. They can also be removed at home.

Tape marks

After removing the adhesive tape, sticky marks remain on the plastic. They cannot be removed with a dry cloth. Folk remedies will help here:

a piece of fresh adhesive tape is glued to the remaining trace and it is torn off with a sharp jerk. The process is continued until a positive result is achieved;
lubricate the sticky spot with any vegetable oil. After 10 minutes, the dirt is wiped off with a paper towel;
the sticky trace is erased with cotton wool or gauze dipped in ammonia or ordinary alcohol.

If there are small traces of tape left, do not immediately resort to aggressive cleaning methods. You can try to erase the stain with a regular eraser.

traces of paint

On plastic, traces of paint are a serious guest requiring immediate removal. First, you need to resort to a gentle method, lubricating the dried paint silicate glue. As the adhesive dries, it will begin to shrink, pulling the bulk of the paint with it.

As with your own hands, if the sashes sagged or it bleeds through the windows.

If this does not help, take a piece of cotton wool, moisten it in a nail polish remover solution and wipe the painted area. It is important to pay attention to the absence of acetone in the composition of the liquid. Otherwise, this substance will corrode the plastic.

Mounting foam

Adhering foam in the wrong place is a common occurrence after repairs. Specially for PVC windows, Cosmofen is sold. Uncured foam is removed with a plastic scraper, and the remaining stain is wiped off with a rag soaked in this solution.

Dry foam should be cut to the maximum sharp knife, and moisten the remaining stain with Dimexide medical solution. After 5 minutes, loose residues are washed off with the hard side of a dishwashing sponge.

The store sells special foam solvents. Before using them, you must carefully study the instructions, otherwise an aggressive solution will do more harm than good. SOL OFF Delicat Barton'S is considered the most harmless to plastic and skin of the hands.

Soot

From the street side to pvc framed a lot of soot settles. It is formed during the operation of factories and from car exhaust gases. Indoors, soot settles from tobacco smoke and burnt during cooking. Soap solution will help get rid of it or baking soda. They simply wipe the window, then rinse with clean water. Aggressive anti-soot products should not be used.

construction dirt

At the end of the repair, traces of cement, wallpaper glue or plaster remain on the windows. All these residues are easily washed off with soapy water. Strongly solid fractions can first be soaked in vinegar, then washed off.

Having cleaned the window sills and frames from dirt, it remains to wipe the glass. For this there are many store funds type "Second" or just add ammonia to the water. A traditional crumpled newspaper will help to add shine to the glass.

In contact with

Seasonal window cleaning is a routine activity that is usually done in the fall and spring. But after the repair, window frames, glass and window sills may remain Construction Materials that need to be removed. You can bring the windows into proper shape on your own, without resorting to the help of a cleaning company. We'll talk about how to do this today.

Before you buy expensive products, arm yourself with sufficient knowledge to help save time and money.

Protect your windows ahead of time. Before carrying out repair work, make sure that building materials do not get on window frames, glass, plastic parts and other elements. To do this, glue the windows masking tape, cover with a film or at least an old sheet. Otherwise, the remains of paint, putty or plaster will be difficult to wash off.
Take off the tape. When the repair work comes to an end, traces of glue or adhesive tape may remain on the double-glazed windows. So if you've protected your windows with duct tape, take it off every 5 days and let the windows "rest". This recommendation is relevant if the repair is delayed and lasts about a month. If you leave the tape on the windows, at the end of the manipulations you will encounter sticky traces that are difficult to wash.
Do not use sharp objects. In cases where the owners neglect practical advice and do not protect the windows beforehand before starting work, paint and other building materials will definitely fall on the frame or glass. In such situations, it is highly undesirable to use cutting objects to scrape off paint residues (plaster, etc.). Scraping dirt will only damage the plastic. Better take advantage special tools from a hardware store aimed at cleaning windows after repairs. These scrapers have a rubber or plastic base.
Do not use chlorine or soapy water. It doesn't matter what type of windows you have. Neither double-glazed windows nor ordinary windows can be washed soapy water, bleach and other aggressive agents. Chemical compositions with abrasive particles that spoil the surface are prohibited. Products with alkali make the transparent surface matte, window panes visibility deteriorates. Better buy a special spray aimed at cleaning windows.
Protect yourself from toxic fumes. If you decide to give the choice cosmetics professional series, observe safety measures when working with such compounds. Be sure to protect the respiratory tract, skin, eyes. Do not inhale toxic fumes that can burn mucous membranes and cause poisoning. After cleaning is complete, ventilate the room. Prepare the solution according to the manufacturer's instructions.
Choose the right window cleaning material. To clean window surfaces and window sills, use soft tissue. Suitable flannel, polyester, cotton or terry towels. Make sure that the cloth does not crumble during washing. You can also use paper or microfiber napkins, soft newspapers (pre-rub). That's how you manage to polish window panes to shine without streaks. Do not use thin toilet paper.
Follow the sequence of actions. Few people know that any windows should be washed first from the outside, only then from inside. Professionals who do their work with high quality, taking into account the requirements, have heard about such a trick. Observe the order in cleaning the parts. First of all, the glass is washed, then the fittings, frame, window sills. Before starting all manipulations, vacuum small gaps to get rid of dust, primer or putty residues.
Protect the rubber elements. If you use harsh alcohol-based window cleaners, make sure that the solution does not get on rubber parts, seals, etc. Otherwise, the rubber bands will become hard, dry out quickly and cease to function. Do not leave the composition on the windows longer than the specified period so that the plastic does not crack.
Do not use acetone or abrasives. For washing and cleaning windows after repair work acetone products are not suitable. They should also not be applied to window frames and window sills. Compositions with abrasive particles are prohibited for use. Glasses cannot be washed with soda, not diluted with water. It is allowed to use products in the form of solutions (soda, salt). It is necessary to immediately exclude dry powder, hot water.
Choose right time for cleaning windows. After the repair, many housewives try to get rid of dirt and building materials on the windows as soon as possible. But it is worth considering the time at which the cleaning will be carried out. It must not be carried out in direct sunlight. Wait for the moment when the ultraviolet does not hit the windows. Perfect option- washing windows on cloudy days, in the late afternoon.

Ways to remove building materials from windows

If you have building dirt in the form of a primer or plaster on your windows after repair, the composition must be moistened before removal. To do this, seek help hot water. The procedure should be done several times in a row. At the same time, remove the building compound with clean wipes.
To deal with excess polyurethane foam must be carefully removed with a scraper. Next, the composition must be soaked with a chemical composition or water. After that, wipe the soiled area with a dense sponge. Do not scratch the surface of the frame.
If you want to get rid of paint stains, just use a powerful hair dryer. Hot air contributes to the destruction of the chemical composition. The spots will simply melt and go away. After that, it is enough to wipe the surface with a cloth.
To remove the remnants of adhesive tape, adhesive tape, the material must be processed warm water and soft sponge. After that, try to carefully remove the material. Often, to fix the problem, they resort to using an iron or a steam generator. The bottom line is that sticky tape needs to be steamed.
If the windows are stained with any adhesive, it is recommended to use special chemical compounds. Directional solvents or mild soaps are suitable for such purposes.

To properly clean the windows, you need to wipe the surface of the frame with a dry rag from special composition. Nothing should fall off the material. After collecting dust and dirt, re-walk the profile with a vacuum cleaner. Do not ignore the gaps between the frames.
Use any tool available to clean up serious contamination. Use a plastic scraper. Remaining dirt can be removed with a brush and a microfiber cloth.
Spread a soap-based cleaning solution over the glass. Means can choose any directional action. To facilitate the procedure, it is worth using a spray gun. The product must be sprayed diagonally.
After that, it is recommended to remove the soap composition with a soft cloth or napkins that do not leave lint and similar particles. You can use special double-sided paper clips. Don't forget to press the attribute. Remove plaque from top to bottom with smooth movements.
In conclusion, the window must be wiped with newspapers or paper. To prolong the cleanliness of surfaces, the glass can be coated with a special agent. This mixture does not need to be rinsed off. After processing, the window will not get dirty for a longer time. The main task remains that the spray must be distributed evenly. After that, clean the frames and window sills.

Folk ways to clean windows

There are situations when it is not possible to resort to expensive and powerful window cleaning products. The question arises of how to clean surfaces without the use of professional mixtures after repair.
Folk remedies will help you. Try starting with acetone-free nail polish remover. The tool removes various stains. The composition is effective against paint and glue.
Use vinegar to remove dirt. The composition must be diluted with water. Proportions take 5 to 2 (6% vinegar and warm water). The tool will help you bring the appearance of the windows in the proper state.
The gel solution can also be your helper to solve actual problems. For such actions, a kitchen detergent in the form of a gel is quite suitable. This composition perfectly removes contaminants from various surfaces without consequences. This will require only 50 gr. funds for a bucket of warm water. Achieve foam and proceed to the procedure.
Not less than effective tool ammonia is considered. The composition must be diluted with cool water. The mixture perfectly eliminates the consequences of repairs. To prepare the product, you need 40 gr. alcohol per liter of water. Wipe dirty areas.
In extreme cases, the use of kerosene is allowed. The composition may only be used at the site of contamination. Kerosene is effective against paint stains.

It is easy to clean plastic windows yourself. In order not to face similar problems in the future, try to take care of the protection of surfaces in advance. To do this, it is enough to resort to the help of a construction film.

Video: how to clean windows and glass from cement and plaster

Renovation means not only updated facilities, but also a lot of cleaning. This is especially true for plastic windows - after repair, you need to wash both glass and plastic, and save them original view. It is extremely important to choose the right product depending on the type of pollution.

How to wash various types of dirt from plastic windows?

It is not easy to wash plastic windows after repair, as they remain contaminated with various types of dirt: remnants of mounting foam, paint, plaster, putty. It is important to remove all these elements without scratching the surface or discoloring the plastic.

To clean plastic windows after repair, certain materials and tools are needed:

Glass scraper. An ordinary spatula or cleaning knife will not work - such tools leave scratches on the surface.
Microfiber wipes. You can also use folk remedies - nylon tights, newspapers, paper towels.
Hard sponge - in combination with a cleaning agent, it will perfectly wash the frames.
A vacuum cleaner. It can be used to clean window mechanism from the dust that constantly accumulates during the repair.

If the windows were covered with a film before repair, then it should first be moistened hot water, and then delete it. Read more about how to remove film from plastic windows -.

Major contaminants can be removed with plain water. To do this, wet the glass, and then collect the water along with the dirt with a scraper. A soapy solution is also effective - so that there are no streaks left, it must be washed off with clean water, and then the surface should be polished.

You need to wash the glass and frames first, and then proceed to the window sill. Glass should be washed from the inside first. The tide is washed last.

If mounting foam remains on the windows, then it must be carefully removed mechanically. A spatula can also be used for this, but it can leave scratches.

Traces of paint or tape are usually washed off with a solvent - you can buy it at any hardware or hardware store.

When cleaning, it is important to avoid getting any products on the window seal. It is made of rubber and provides the window with tightness. Aggressive components destroy this material, and therefore harm the entire window structure.

When choosing cleaning products, it is important to read the label - they must be designed for PVC, otherwise the components may corrode the material or cause it to discolor. When using aggressive agents for cleaning plastic windows, cleaning must be carried out in rubber gloves. For maximum safety, you can also wear a mask.

Cleaning of plastic windows should be started immediately after the repair is completed. The longer you delay cleaning, the more dirt eats into the surface. Fresh traces after repair work can often be washed off without special efforts and the use of special tools.

You can wash plastic windows after repair with both ready-made household products and with the help of some folk tricks.

Household cleaners for PVC windows

When washing plastic windows for glass and plastic elements (frames, slopes, window sills), you should use different means. Learn more about how to wash plastic window sill - .

To wash plastic, you can use the following household products:

Domestos. This tool not only cleans, but also disinfects surfaces, and also has a whitening effect. Such a product is able to cope even with fairly persistent pollution. It is enough to apply the product on the surface, leave for a few minutes and rinse with plain water.
Mr. Proper. This tool is universal, therefore it is suitable for washing both glasses and plastic surfaces. Minor contaminants can be removed with a diluted solution in water, and in more complex cases, a concentrated composition is used.
Fenosol intensive cleaner. It is enough to apply it on a cotton napkin and wipe the surface. There is a whole set of this brand for window care, including separate products for: window profiles, rubber seals, fittings and window mechanisms.
Karcher. This brand offers not only window cleaners, but also special devices for this.
Amway L. O. C. This concentrated product is versatile. It is necessary to dilute this composition depending on the degree of contamination. First, water is poured into the container, and only then the agent is added there. There is also a special tool for glasses of the same brand.
Another universal remedy– H.G. The product is concentrated, so it must be diluted. If the pollution is very strong, then the composition can not be diluted. The product should be applied to the surface and left for a few minutes. You can not use this composition under direct sunbeams. There is a special tool for glasses of the same brand - it is produced in the form of a spray.
Inexpensive glass cleaner - Help. It comes in a spray bottle and is very easy to use.
iKeep. This brand has an all-purpose cleaner and a glass cleaner product. The first must be applied to the surface and left for a few minutes, then rinsed with plain water. Window cleaner is sprayed - cleaning is done with a regular microfiber cloth or a replacement material.

Folk remedies for washing

There are many folk remedies that will help wash plastic windows after repair:

If there are splashes of cement left on the window, then you can remove them with a lemon. Citrus must be cut in half, and then rub the contaminated surface with these halves. After a while, the building mixture will dissolve and it remains to wipe the window with a damp cloth and polish.
Traces building mixtures on windows can be removed with household chemicals designed to combat lime deposits on plumbing. It is necessary to use such means carefully so as not to spoil the surface.
Another remedy for cement is soda and vinegar. First, apply to the contaminated surface acetic acid, and then treat it with soda, poured onto a damp sponge or rag. Then you need to intensively wipe the surface, adding soda if necessary. After the window should be rinsed with water and polished.
You can also get rid of traces of cement with the help of solvents. It is necessary to remove strong influxes of the mixture with a spatula, and then treat the remaining contaminants with felt soaked in a solvent. After 10-15 minutes, the cement will soften, and its residues can be easily washed off.
Adhesive residues can be removed from the glass ammonia and dish detergent. It is necessary to mix both components in proportions of 2: 1, moisten the sponge in the resulting composition and treat the contaminated surface. It is necessary to apply the product several times until the glue softens. It can be removed with a hard sponge or rubber spatula.
You can also get rid of traces of glue with the help of vegetable oil. It is necessary to moisten a cotton wool in it and wipe the contaminated places. After an hour, the remaining adhesive can be easily removed.
You can remove the remaining tape from the windows with alcohol, thinner or ordinary nail polish remover. It is necessary to moisten a cotton swab in the selected product and wipe the contaminated areas. Read more about how to wash adhesive tape and glue from it from glass -.
You can get rid of traces of mounting foam using pharmaceutical preparation"Dimexide". It must be applied for a few minutes on the remains of the construction product, and then remove the dirt with a hard sponge.
If the surface is heavily stained with paint, then you can deal with this with foil and an iron or building hair dryer. The foil must be applied to the contaminated surface, and then heated. The paint softens with this exposure and is easily removed.
Small drops of paint can be removed with silicate glue. To do this, apply glue to the spots and leave to dry completely. The glue will begin to shrink, pulling out the paint as well.
If the paint has not had time to dry, then it can be removed with soapy water. It must be applied liberally to the contaminated area and left, periodically wetting.
Strong pollution can be removed with kerosene or gasoline. Both tools are very aggressive, so they should be used when other methods were powerless. You should first check the selected composition for small area surfaces.

General rules for the care of plastic windows

There are a few general rules to be used in the care of plastic windows:

care products should be chosen only special - the label should be marked "for PVC";
do not use abrasive products on plastic windows: this applies not only to cleaning compounds, but also to auxiliary materials;
it is undesirable to use aggressive agents for plastic windows, and if you still have to resort to them, then you need to limit the ingress of such a composition onto the sealing gum;
it is imperative to take care of the valves, for this you can use machine oil and silicone grease and process it twice a year;
after installing the windows, it is imperative to remove the protective film;
it is worth washing windows and performing other actions to care for them in dry and calm weather;
glass washing should start from the top, gradually moving towards the windowsill;
do not allow contact of plastic windows with hot objects. Often such a mistake is made in the kitchen when they put a pan removed from the stove on the windowsill or install a slow cooker or other heating appliance there;
it is necessary to regularly clean the windows from dirt: if you do not allow strong pollution, then for standard cleaning a soap solution or conventional means for glasses;
for the duration of the repair, it is necessary to carefully close the windows: for this you can use a film, old wallpaper or fabric;
it is important to protect windows from various mechanical damages: even small scratches can significantly reduce the life of plastic structures;
on the service life plastic windows are affected by humidity. Regularly ventilate the premises, monitor the ventilation system and, if possible, use air conditioning.

Plastic windows after repair can be washed different ways. For this you can buy household products or use folk tricks. It is best to take care of this in advance and carefully close the windows before repair to avoid heavy pollution.

Putting plastic windows is only half the battle. So that they retain their original appearance and serve you long years they need proper care. Many people have a question about how to wash plastic windows at home.

Detergents

If we talk about products for the care of plastic windows, then every year there are more and more of them. The industry produces ever newer and better products.

For cleaning you may need:

"Mr Muscle" - a product designed for washing glasses, will allow you to get transparent window without divorce;
"Formula 409" is suitable for cleaning stains;
"Sanita" will help to gently clean the dirt;
"Frosch" will get rid of traces of installation work;
"White Cat" - a rag that is designed for washing glass and plastic surfaces;
"Domestos" - a gel that helps restore the whiteness of the plastic frame;
"Mr. Proper" - will perfectly cope with traces of fingers, fat, soot;
"Pemolux" is recommended for cleaning old dirt and stains;
gel "Komet" is used for washing kitchen windows- it cleans grease well;
washing powder, laundry soap or dish detergent can be used to wash fresh stains and a small area.

Household chemicals clean glass from dirt and dust well

In addition to the use of household chemicals, you can resort to folk remedies which are no less effective. Consider how you can wash plastic windows at home:

Soap solution. Take any powder, laundry soap and dissolve in water. The resulting composition is used to wash windows.
Dentifrice. It is mixed with chalk to a homogeneous consistency of sour cream, applied to the dirt and allowed to dry, after which it is washed with a dry cloth.
vinegar solution or citric acid in combination with soda gives an excellent effect. Soda is applied to the surface, and intensively rubbed with a sponge with acid.

Washing technique

To plastic for a long time service remained aesthetically attractive, you need to know how to wash plastic windows at home and follow some rules for caring for them. The main point is right choice inventory. Do not use abrasive products that could scratch the plastic surface or scratch the glass. It is worth using soft rags, sponges, paper towels and napkins.

To clean the double-glazed window, use soft rags and sponges.

Also, remember some rules:

wash windows on a cloudy day so that the glass does not dry so quickly, and you have time to wipe the surface before iridescent stains appear on it;
first of all, the frame is cleaned, then only the double-glazed window;
apply detergent composition evenly and in one direction, circular movements create stains;
for glasses it is better to take special alcohol solutions of detergents.

For good quality cleaning must be observed correct sequence actions. If the window was recently installed, you need to peel off all the film that protected the frame during transportation.

It is necessary to peel off all the film that was used during the transportation of the double-glazed window

Wash the plastic with ordinary soapy water from dust and dirt. If available separate sections severe pollution, they are treated by special means. Minor scratches can be repaired with polish. However, not all products can be used for cleaning plastic windows.

Important! Remember not to use:

abrasive powder products will leave scratches on the surface, creating an untidy appearance of the plastic structure;
acid and solvent can change the color of the panel, so use them with caution.

Proper care of the plastic frame and double-glazed window

Durability of use due to proper care. This is especially true in winter period year, so you need to know how to care for plastic windows in winter.

A hex wrench is used to adjust plastic windows.

In order to prepare the window for the winter, you will need tools and equipment. These include:

rags and napkins;
soft brush;
hexagon;
sealant lubricant;
machine oil.

Sequence of work

First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. Soft rags and napkins are used, as well as non-abrasive detergents. Stubborn soiling must not be removed using a knife and cleaning powders.. Before you start washing windows, you should brush off the dust with a brush.

Dirt accumulated over the summer can make it difficult to open and close the window

After that, you need to start adjusting the fittings. You can do this with a hexagon. In order to avoid the penetration of cold into the room in winter, you need to move the clips on the sashes to winter mode. Thus, the fit of the window frame will be stronger.

Switching the window to winter mode ensures a tighter fit of the frame

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the sash several times, this will help the oil to distribute. This procedure should be repeated throughout the winter, the main thing is not to do it in very coldy.

It is necessary to lubricate window mechanisms several times a season.

The seal also requires attention. Rubber products wear out over time and cease to fit snugly, this affects the tightness of the window. You can wash the gum right on the window or by removing it. The procedure must be carried out using detergent then be sure to wipe dry. The process is completed by applying a silicone agent for rubber seals.

Silicone Grease prevents rapid wear rubber seal

If you see that the window fogs up in winter or condensation collects, then you need to contact the experts. They will check the condition of the rubber seal and replace it if it is worn out. It is important to replace parts on time, this will help extend the life of the window.

Insulating glass maintenance

On condition correct installation a plastic window, a double-glazed window will last about 40 years. When installing, make sure that the windows are in a special protective film which will protect them from scratches during transportation and installation. Such windows do not need painting or pasting for the winter, but they still need to be washed at least twice a year. You shouldn't do this when low temperatures as the glass may break if it comes into contact with water.

Glass can be washed with soapy water. Do not use abrasive powders and brushes that scratch the glass surface.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, eventually forms yellow circles. These stains are very difficult to remove, and sometimes simply impossible, so you should use a special self-adhesive film on the windowsill, which can be white or another color, as well as pallets for indoor plants.

The window sill is protected from moisture with a special film

window sill texture different manufacturers may differ. They are smooth, porous or rough. When selling, the consultant usually talks about what kind of material is used for the window sill and how to wash off the dirt. However, some features should be taken into account, for example, a rough window sill can be cleaned using a hard brush, but in no case should a scraper or knife be used.

Slope care

Slopes also need maintenance, but the means for this directly depend on the materials from which they are made. If they are made of plastic, then special care will not be required. They are easy to wash and clean from dust and dirt. A special feature is the need to replace the sealant, which, a few years after installation, is completely removed and replaced with a new one..

After several years of operation, the sealant must be replaced.

If the slope is made of drywall, then it is covered with paint that can be washed and updated if necessary. When using cork or bamboo, it is enough to systematically wipe them with a damp cloth from dust.

Plastered slopes should not be washed, because they are unstable to moisture, they can be wiped with a damp or dry cloth. At the joints, you need to use acrylic sealant and paint the surface in a timely manner.

Categories

Popular