Luminous ceiling as the main lighting. Luminous stretch ceiling Luminous stretch ceiling tape installation

Recently, new possibilities in design have appeared. Glowing ceiling, as the main lighting, widely spread among consumers.

What it is

If you correctly position the lighting fixtures, you get a uniform soft illumination of the canvas. This amount of light is enough, so you can not overload the interior with chandeliers, sconces and other similar accessories.

Fig.1. Installed LED strips for ceiling lighting

The design visually expands the room and has a beneficial effect on the psyche. It seems to a person that he is in an open space.

The house creates the illusion of natural daylight. Therefore, this solution looks interesting in residential buildings, and in offices, and in entertainment venues. It always turns out beautifully, whatever the design.

Note!

To maximize the effect, it is better to use LEDs. They give the brightest luminous flux and better illuminate the room through the matte diffuser material.

In addition, these devices are preferable to use from a practical point of view. They last a very long time and do not burn out. This is important because the entire web will have to be removed to replace the electronics. You can buy the LED strip here.

translucent film

If a luminous ceiling is used as the main lighting, then it is often used. The peculiarity of such a material is that it transmits about half of the light flux and scatters it. The material is very durable, and also favorably stands out among its counterparts.

Fig.2. translucent stretch ceiling in room

With a fairly wide variety of colors, translucent canvases are produced, as a rule, in light shades. This is because the less saturated the shade, the better the light from the devices passes through it.

But sometimes also dark colors appear in design projects. More often - in combination with light areas or other textures.

During installation, LED modules or LED strip are attached to the ceiling before stretching the membrane. They can be of several colors, as well as with different brightness. This will allow, for example, to increase the light in the late afternoon or dim it at night.

Such subtleties depend on the project and on what the purpose of the room is. Sometimes a luminous ceiling, as the main lighting, is not able to cover the entire area of a spacious room. In such situations, they resort to a combination with other textures - satin or matte.

Built-in backlight

Luminous ceilings, which are used as the main source of illumination, also include multi-level ceiling structures. The backlight is placed around the perimeter of the levels, one of which is also made of a translucent film and ceiling lighting is used. It turns out quite beautifully and attractively - a characteristic pattern is created on the surface that complements the overall style of the apartment.

Built-in lighting is found in many stylistic directions. This and modern options, and ethnic motifs of different eras.

starry sky

One of the popular types ceiling finish- surfaces that imitate the starry sky directly in the house. Such beauty is created in a simple way: special fibers, which play the role of stars, are attached under the film and released through the coating. The material is most often dark blue, but there are also more original membranes - purple, orange, brown.

Fig.3. Stretch ceiling "Starry sky"

There are also variations with the use of projectors. They direct their rays directly onto the coating, thereby changing its saturation and hue.

In which rooms is this design appropriate?

To install a luminous ceiling, which will become the main source of lighting, several mounting options are used. Among them are translucent films, built-in lighting in a multi-level design or stylization of the starry sky.

This is unusual design manages to fit perfectly different interiors. For example, the idea with a translucent membrane is suitable for both a living space and a nightclub. In a business office, it is also a good idea to build a classic white coating that also glows.

Fig.4. Luminous Double Vision ceiling in the kitchen

Suitable not only for the nursery or bedroom, but also for the kitchen and living room. And also this decoration is no less popular in restaurants, cafes or clubs.

When installing, in addition to beauty, it is important to remember that light diffusers above your head visually raise the height of the space. Therefore, in houses with low ceilings, this technique is especially valuable. Moreover, the thickness of the structure itself is minimal.

With the help of light panels, you can zone the room or place certain accents on it. You just need to correctly place the sources.

It happens that the room is not equipped with windows. For example, a bathroom. In this case, luminous ceiling structure fits perfectly. It will give the atmosphere comfort and freshness, which will make water procedures even more enjoyable.

The kitchen is too appropriate place for such structures. Here people spend a significant part of their time preparing and eating food. Therefore, the issue of comfort should not be overlooked.

In whatever space it is planned to install such a structure, first of all, you should calculate the amount of light needed. Excessive brightness is also inappropriate, as well as insufficient. Contact us. In the selection of equipment, we are always ready to help our customers.

How much has already been written about ceilings in newspapers, magazines and on the Internet. They came up with something new, somewhere they improved the quality of old ideas. Technology is evolving and we are trying to keep up with it.

In this article, you will learn how to make your ceiling more beautiful due to these very new products. It's about the luminous ceiling.

Types of ceilings

They exist a large number of. But there are not so many glowing ones. Because at this time there is little demand for them due to the high cost.

Consider the most popular:

Luminous stretch fabric with LEDs;
fiber optic backlight;
Starry sky - luminous ceiling stickers;
Luminous ceilings with the use of paints;
Wallpaper applications.

Description and installation

Well, now about everything in more detail.

Tension structures

Luminous stretch ceilings look amazing, for their manufacture a special PVC optical film with 50% transparency is used. Its installation technology is the same as for a conventional stretch fabric. The light source is used, which can be monochrome or RGB color.

Pros:

Low energy consumption;
Long service life;
Low heating temperature;
Huge range of colors;
Luminous stretch ceilings can be controlled and programmed through additional equipment;

There is essentially one minus - the rather high cost of the product.

The composition of lighting equipment for suspended luminous ceilings includes the following elements:

Wire 2x0.75 (two-core cable with a cross section of 0.75 mm, for example, ShVVP). The number of wire depends on the choice of type led strip and method of installation;

LED strip (single-color or multi-color RGB);

Transformer 220v / 12v with power corresponding to the connected tapes;

Controller (if you use multi-color rgb tape);

Dimmer - brightness level control for monochrome tapes;

Aluminum bar - mounting profile, which simultaneously serves as a heat sink.

Equipment installation

Now let's describe the process of mounting the LED strip. It is quite simple and includes the following steps:

Markings are made on the ceiling of places for attaching an aluminum strip;
The profile is cut to the desired length;
Wires are being pulled to the installation site of the transformer, power is not needed yet;
The LED strip is cut into segments;

Attention! It is not allowed to install a tape with a length of more than 5 meters. If you want to cover a longer length, then the segments are connected in parallel.

Fasten the aluminum strip to the ceiling, according to your markings in increments of no more than 300 mm;
Attach to plank LED backlight desired length. To do this, remove from the back protective film and stick it on the opened adhesive base;

Connect the wires from the tape to the transformer through the controller or dimmer, depending on the type of tape, observing the polarity;
Power the power supply according to the model diagram and check the operation of the circuit.

Tip: To get best effect fasten the strips in 300 mm increments. If the step is larger, then when turned on, dark areas will appear on the ceiling. The height of the stretch fabric is from 100 mm, so that the line of LEDs is not visible.

There is a very interesting technology stretch ceiling lighting with fiber optic cable. The bottom line is that the canvas is pierced, after which the edge of the fiber optic thread is threaded into the hole, which is melted and filled with glue so that the stretch ceiling does not burst.

The cable itself is a set of threads capable of transmitting light radiation over long distances with virtually no loss. At the beginning of the cable is mounted a light source, usually an LED, which emits light. The cable itself is not connected to electricity in any way, so it is absolutely safe.

Panels

To decorate the ceiling with a starry glow, the Starry Sky fiber optic ceiling module will help, in which LEDs or fiber optics act as a light source. Standard panels are made in the form of a disc with a thickness of 5 mm and a diameter of 1 m 20 cm to 1 m 50 cm. Lighting effects are controlled through the control panel.

Material:

Disc "Starry Sky" with built-in LEDs;
Control panel with a controller to control the glow of the LEDs;
Controller and remote control for twinkling stars and meteors.

Installation of such a design takes not much more than an hour. In terms of installation complexity, it is no more complicated than an ordinary chandelier. The fastening mechanism is manufactured at the manufacturing plant. You only have to run the power cable to the center of the installation of the structure.

Glowing star stickers

On sale there are stickers luminous on the ceiling. There is nothing unusual about them - this is an ordinary print using phosphorus, many of us remember those Soviet eagles that proudly spread their luminous wings in the dark!

It is enough to turn on the lights for a few minutes to charge them for several hours. The basis of the surface can be any (drywall or plaster).

The material is mounted on an adhesive base or Double-sided tape, so the surface for gluing must be well prepared: degrease, clean from dust. Luminous ceiling stickers hold up well and can last a very long time.

Advice! Don't use too many stars to avoid turning night into day. Wipe products periodically - this will enhance the glow.

Luminous ceiling with paints

Using fluorescent paints you can apply all your imagination and draw a real masterpiece.

A 5% color fluorescent pigment is used to obtain shades. Any of these colors shines brightly for an average of 30 minutes, then fades a little and then the glow lasts about 4 hours. All colors on water based so they are environmentally friendly. Exist great amount manufacturers. You choose.

Material:

Phosphor paint different colors. Its volume depends on the surface area. Paint consumption 200-250 ml/m2;
Brushes with synthetic bristles;
Porous sponges;
Stencils.

Training:

Draw the future ceiling first on paper;
Cut out the stencils necessary for work or buy them in a store;
Prime the surface well and wait for it to dry;
Apply a layer of base paint.
After drying, make sure it is dry, smooth and clean.

Stars. For these purposes, use brushes. Dip the brush into the container with the paint, removing the excess on the edge. When pressing on the brush, its bristles move apart and create the effect of a real star;
Comet. The method is similar to the previous one, but do not remove the brush, but drag it along the line. In this way, you can create the head of a comet and its tail;
galaxies. To get a cluster of stars, use porous sponges. You can use different types to get different kinds galaxies;
Planets. To depict these celestial bodies, use round jaws. If there are none, then make them yourself.

Advice! To create a flying luminary, use different colors and shades. Since each type of paint has a different glow time, this effect will give the picture realism.

Ceiling with luminous wallpaper

Two main types can be distinguished:

Phosphor;
Fluorescent.

The first option is considered obsolete today, but you can still meet them. Drawing is applied to them acrylic paint with the addition of a phosphor. The principle of operation is similar to stickers. When sticking, ordinary wallpaper glue is used.

Fluorescent wallpapers are made from polyester. They are 3D printed, which looks very impressive. They are illuminated by special fluorescent lamps, called Voodoo lamps. Its principle is based on the radiation of only the long-wave part of the ultraviolet range. This radiation, falling on the wallpaper, causes the fluorescent coating to glow.

The process of gluing such wallpaper is standard. Wallpaper is produced in the form of paintings, canvases and in rolls.

Conclusion

From this article about the variety of materials that allow you to make luminous stars on the ceiling and more. You can confidently use the acquired knowledge in practice, but if such a glow seems unattractive to you, then do not rush to get upset.

There are many more solutions for decorating your ceiling. Read the articles on our website, watch the videos in the articles, and you will definitely find the ceiling of your dreams!

Stretch ceiling - in fact unique look finishes, which are distinguished not only by impeccable appearance but also high functionality. Neither plasterboard suspended ceilings, nor plastered or painted ceilings can provide such extensive design possibilities. In addition, only with the help of a tension structure can a luminous ceiling be created, which will be used as the main lighting. It will avoid using central chandelier and spotlights, as well as create a perfectly even one-piece ceiling covering. Such a design is especially relevant when decorating an interior in the style of minimalism and hi-tech, but it can also be used in other stylistic directions.

Design creation options

A luminous ceiling as the main lighting can be created in two ways:

make an LED panel, on top of which a translucent canvas will be stretched;
install lamps in the form of "floating lines".

Most often, the first type of design is used to design the main lighting. It allows you to perform uniform illumination of the entire area of the ceiling. This requires the preliminary manufacture of a special LED panel. It consists of plastic base white color to which the LED strip is attached. The tape is arranged in rows. Their number and frequency depend on how bright the lighting needs to be. If it is planned to illuminate the entire structure, the panel should occupy the entire area of \u200b\u200bthe base ceiling. In order for the main lighting to be bright enough, a white monochrome LED strip is used. high power.

If the LED panel will perform the function of lighting in a certain functional area of the room, it is located directly above it. To prevent the light from going beyond the illuminated area, a white plastic box is additionally installed around the panel. It will reflect the light and direct it downward.

However, one LED panel in this design is not enough: a translucent PVC film is also needed. So that the luminous ceiling can be used as the main lighting, it is better to choose a white matte film with high light transmission. The film is stretched at a distance of approximately 30 centimeters from the base ceiling. Compliance with this requirement is necessary in order to hide the dots from the LEDs and achieve uniform light dispersion.

Of course, in combination with a translucent canvas, you can use a colored LED strip, but it is unlikely to provide high-quality basic lighting. It is also not recommended to use photo printing, because the paints applied to the film will worsen the light transmission properties of the material. If you decide to decorate the ceiling with a pattern, you need to place it where there is no need for bright lighting.

"Soaring lines" for the design of the main lighting

"Soaring lines" - innovative LED lights, which are located on the same level with a stretch ceiling. They allow you to arrange high-quality basic lighting, while using fabrics of different textures and colors. To install the structure, special dividing profiles are required, in which, after filling two coatings with a harpoon mount, a niche remains for fixing the LED strip. The gap between the sheets is large enough to secure two rows of tape. This allows you to use the luminous stretch ceiling as the main lighting.

To ensure uniform light dispersion, a translucent film is installed on top of the LEDs - translucid. Such an insert also allows you to provide a beautiful appearance of the structure in the daytime. The number of "floating lines" on the stretch ceiling can be absolutely anything. The main thing is that their light is enough to illuminate the entire room. Lines can be placed horizontally or vertically. Also, individual profiles can be combined into different geometric figures, create intersection of lines or place them randomly. For high-quality lighting, it is recommended to use a white high-power tape.

Such a luminous ceiling will help visually make the room longer or wider, highlight individual functional areas and place accents on certain elements of the interior. Unlike the design with ceiling lighting, “floating lines” can be easily combined with photo printing, because the pattern in this case will not affect the brightness of the lighting. Also, such lamps allow the use of PVC film of any color and texture.

If you dream of a luminous stretch ceiling, you only need to decide on the type of construction and contact the Mossiling company. We will promptly accept the order and bring your idea to life quickly and efficiently.

Good lighting in the room great importance. It is important to correctly position its sources so that the light is even and uniform, while not overdoing it with the number of devices. original version lighting - luminous ceiling. Modern tricks and technologies allow you to create such an effect with minimal financial investment.

Pros and cons of stretch luminous ceiling

Like any suspended structure, the tension coating allows you to hide the flaws in the base ceiling finish, wiring, communications, and make the surface smooth and even. Considering that the cost of tension structures is not much higher than the cost of any other finish, this option is optimal and practical solution during repair.

By placing several LEDs under the hanging material, it will be possible to create a luminous ceiling. At the same time, it is not necessary to exclude traditional chandeliers or standard lamps from the interior. A canvas with a glow effect can become decorative lighting or interior decoration.

If you decide to use other options lighting fixtures, in the future, difficulties may arise with their maintenance, so it is better to choose LEDs. They radiate enough good light and can be used as the main lighting in the room.

The ceiling will look original, on which a pattern is reproduced with the help of a tape under the coating. If at the same time the glow is not very strong, it can be used as a night light, when you only need to light up the room a little.

However, such designs are not without drawbacks. For example, if you incorrectly calculate the distance from the LEDs to the film coating, you will get uneven illumination. Therefore, luminous ceilings require thorough preparation and correct calculations before installation, since after installing the canvas you can’t change anything.

To find the right distance, you need to know. As a rule, the value should be at least 10-15 cm. Therefore, the system will take a lot of height from the room. For low rooms, this is unacceptable.

Hidden backlight maintenance will also fail, so you will need to buy high-quality tapes that will work for a long time without requiring replacement and repair.

You also need to purchase a special transformer, to connect which you will need to install several converters on the ceiling surface. Accordingly, this will increase the final cost of the luminous ceiling.

The price will also be affected by the installation of a dimmer - a device with which the brightness of the glow is regulated. It is necessary when LEDs are used not only as a backlight, but also as the main light source.

Nuances when choosing

To get the expected effect, it is necessary not only to choose the right lighting, but also outer coating. The best option will be of high quality translucent vinyl film. In the manufacturers' catalogs, it is referred to as translucent. The surface transmits up to 50% of the light from the lamps located above it in the overhead space. At the same time, wires and trim are not visible from below. draft ceiling. Turning off the light, you will see only a flat matte surface, with the devices turned on, a uniform glow on the ceiling will remain noticeable.

Types of modern film differ from each other in the degree of transparency, which is affected by the color of the material. White film coatings have high transparency, brown ones are the worst. If the light source is only an LED, get a light canvas that will give the effect of daylight glow.

To make a luminous stretch ceiling, you will need to purchase an LED strip. It is produced in the form of long flexible strips, the width of which is 8-10 mm, and the thickness is 2-3 mm. On the surface of the board are LEDs and resistors. The standard length of products is 5 meters.

To choose the right backlight, you need to know the main qualities of such lamps:

glow color. You can buy a source with one shade - yellow, red, blue, white, green, or purchase special tape RGB, which combines several colors;
LED type There are two options - SMD3528 and SMD5050. They differ from each other in the intensity of the glow;
number of LEDs. The brightness of the glow depends on it. Usually 60, 120 or 240 elements are placed on one meter of tape. For a colored ribbon, the indicator is limited to 30 elements;
moisture protection. If you plan to install such a ceiling in the bathroom, be sure to buy a tape with moisture protection. There are two types of them IP 30 and IP 65. The second option has a greater degree of protection.

When choosing a tape, pay attention to its service life. For example, if the device has a service life of 30,000 hours, while the backlight will work for at least five hours a day, you will last 16 years.

And, of course, an important point is quality installation luminous element and its connection. This includes the reliability of fastening, checking the contacts for connection and operability, as well as insulation.

You can make a luminous ceiling with your own hands. Most importantly, observe the exact sequence of work and the correct connection of the elements.

There are several lighting options:

from within. Tape is attached to stretch fabric on a slab or pre-mounted profile. This method will help not only to highlight the ceiling with its inside, but also to create interesting design in the form of figures, ornaments and patterns. The location of the fixtures for the stretch ceiling must be designed at the preparation stage. An image is drawn on the base surface. In this case, you need to know that the more bends you use, the less the LEDs will last.
invisible ceiling cornices. The tape is installed under a special plinth mounted to the ceiling. If you correctly position the luminous elements, it will be possible to achieve the “floating effect” of the structure;
drywall tier. In this case, it is supposed to install false ceiling consisting of two levels. lower tier mounted from drywall, which is sheathed metal carcass, and a PVC film is stretched in the center.

For installation of backlights from LED strips under the coating, you will need to purchase:

tape;
controller;
power unit;
connector;
RGB amplifier;
wires;
cable.

When choosing the type of tape, keep in mind that the number of light bulbs affects the power of the device. For example, a product with 60 bulbs consumes 4.8 watts per meter, 120 - 7.2 watts, 240 - 16 watts. You should not choose the highest power, since strong heating of the canvas from the light source will lead to its deformation.

Tapes are powered by different voltages - from 12 to 64 volts. Therefore, choose the power of the power supply based on this indicator. It should be a quarter higher than the total power of the LEDs.

If you are making a complex pattern on the ceiling and you need to purchase more than five meters of tape, you will need to install additional block nutrition. Otherwise, the diodes will overheat during operation and quickly fail.

You also need to purchase a controller. With it, the color of the glow on the device changes.

Tape mounting features:

the attachment point must be degreased and covered with a primer layer;
you can strengthen the fixation with the help of special glue and PVC corners. This will make the installation more secure than using simple double-sided tape;
if several sectors of the tape are combined on the ceiling, they are connected to each other using connectors or special soldering. The main condition at this stage is to correctly determine the polarity;
after the tape is fixed, it is connected to a power supply or controller;
the power supply and controller can fail during operation, so it is better to place them in accessible places so that it is convenient to replace elements or repair;
the wires connecting the tape to the PSU are hidden behind furniture, plaster or special skirting boards.

After the tape is connected and tested, you can decorate the surface of the luminous ceiling with PVC film.

For a luminous stretch ceiling with LEDs, the installation technology is similar to that of a standard suspended structure. You need to act as follows:

first markup is done under the base future design. To do this, determine the lower corner in the room, retreat down from it by the required amount, make a mark;
find using the level of the point in the remaining corners of the room. Connect them to each other with a horizontal line outlining the perimeter of the room;
a plastic or aluminum profile is installed along the line. Fasten it to self-tapping screws in increments of 15-20 cm;
the PVC film is suspended from the baguette at three corners and heated with a heat gun;
after the canvas is stretched under the influence of heat, it is tucked into the profile with a spatula;
after cooling and stretching, the coating forms a smooth, even surface.

Now it remains only to check how your luminous stretch ceiling works.

Luminous wallpaper on the ceiling

In addition to the LED strip, you can illuminate the ceilings using special wallpaper, creating a special glow effect.

The composition does not contain phosphorus compounds and has the following properties:

accumulates during the day solar energy, and at night returns it, emitting diffused soft light;
shades of radiation can be performed in blue or green, orange and yellow tones;
such wallpapers not only illuminate the space, but also create a romantic atmosphere in the room.

They are represented by a coating, which, when natural light recalls luxurious finish with three-dimensional images, and at night it makes an impression with separate luminous patterns and contours.

Such wallpapers have the following characteristics:

images are applied using fluorescent paints;
to fully reveal the luminous stretch ceiling, manufacturers recommend using the so-called Wood's lamp. The magic waves of this device are reflected on fluorescent pigments, while glowing mesmerizingly;
To extend the life of such a coating, it is necessary to protect it from direct sunlight.

Usually ceiling space decorate with images of planets, the cosmic universe, a luminous sky. In the nursery they will look original spaceship, characters from fairy tales or favorite cartoon characters.

Luminous stickers

They have a lot of advantages and have long been used by designers in interior design. They perform the following functions:

create an original design;
mask the flaws of the base surface - spots, crevices and other noticeable flaws;

To do this, observe the following rules:

first of all, decide on the appearance decorative elements. For example, for a strictly interior in a room, stickers that create the effect of a starry sky will look out of place. But a complex geometric ornament will originally fit into this style. For the bedroom, choose floral patterns or clouds;
color is important. Stickers should be combined with the whole range of shades that decorate the room;
do not buy too cheap products. Of course, expensive is not always good, but you should not buy the cheapest product. It is highly likely that such stickers are made of low-grade materials, and, at a minimum, will not last long on the ceiling surface or fade quickly;
if you want to decorate the ceiling of the cosmic universe, use special star stickers or appropriate stickers;
carefully consider the number and size of stickers. Perhaps one large element is enough for you or you need several small ones.

On a note! You can also make a glowing sticker yourself using a stencil and special paints.

The least time-consuming of all the options presented is the design of the ceiling surface with luminous wallpaper. For them, you do not need to pre-draw the image, just stick the canvases on the ceilings.

For a luminous stretch ceiling, the film can be replaced with translucent plexiglass, as well as ordinary or stained glass. Luminous stickers and luminescent wallpaper designers recommend using in children's rooms.

If you are planning to equip a luminous ceiling, you can safely implement any idea we have considered. Most of them will not significantly hit the budget. by the most expensive option are stretch ceilings and plasterboard structures.

Photos of luminous stretch ceilings:

How is the luminous ceiling arranged?

There is a lot of unreliable information on the Internet about how such a ceiling works. We will try to outline the scheme of the device of such structures. In the "off" state, your ceiling looks like a simple, perfectly flat stretch ceiling. In the "on" state, the ceiling turns into a huge chandelier that can serve as both the main lighting in the room and just decorative lighting.

From a technical point of view, this is implemented as follows. On your draft ceiling, over the entire area, a special aluminum profile. It fits LED strip, matched to the needs of the client (different power, strip colors, etc.). The whole system is assembled into a single mechanism using controllers and power supplies. The power supplies and controllers themselves can be placed in separate room or mounted directly behind the stretch ceiling. After checking the lighting system, a stretch ceiling is installed. A feature of this system is that the minimum distance from the draft ceiling depends on many factors. Therefore, to get complete information we advise you to consult with our specialist.

YOUR PHONE NUMBER:

Our manager will call you back within 20 seconds

In order for the ceiling to transmit light from the LED strip, Tvoe Nebo company uses special translucent PVC films, as well as Clipso fabrics (30% and 50% translucency) and Descor (50% translucency). Also, photo printing is often applied to the canvas.

Below are the installation schemes for such ceilings with partial and full illumination of the canvas.

Scheme of installation of a luminous stretch ceiling with partial illumination.

Aluminum specialized profile for LED strip
Specialized aluminum profile for fastening PVC tension ceiling
Stretch ceiling harpoon
decorative ribbon
PVC Fabric with high translucency
Standard PVC sheet
LED Strip Light
Draft ceiling

Installation diagram of a luminous stretch ceiling with full illumination and a niche for power supplies.

Draft ceiling
Power supply and control
Wires for connecting the controller to the LED strip
Technological box
Hatch
decorative ribbon
Harpoon
Aluminum baguette
LED Strip Light
Draft ceiling
LED Strip Light
Translucent PVC fabric

The cost of luminous turnkey stretch ceilings.

The cost of luminous ceilings depends on many parameters: the material of the stretch ceiling, the power and quantity of the LED strip, power supplies and, of course, the illumination area. For partial illumination of a stretch ceiling, the average cost is about 5,000 rubles per square meter with materials. For full illumination of the ceiling, the price starts from 10,000 rubles per square meter.

Categories

Popular