What are the cabinets for the washing machine, the rules of choice. Is it possible to install a washing machine in the hallway Washing machine in the closet

small light bathroom design rational use space

Very popular nowadays small studio apartments, or apartments in the so-called "Khrushchev", where every centimeter must be properly used in order to get the most out of the space. For modern interior beautiful, good quality and functional furniture- the main rule.

Washing machine cabinet in the bathroom allows you to close the washing machine and use the rest of the storage space household chemicals, towels, linen

One of the important points is the equipment of the place for the washing machine. It does not matter where it will be located - in the bathroom, hallway or kitchen. Installation in the bathroom is of course much easier than, for example, in the kitchen. Installation does not require additional hoses.

Cabinet for a washing machine in the bathroom in a built-in niche

To save room space or masking household appliances it became popular to make a cabinet above the washing machine.

A built-in wardrobe for a washing machine in a small bathroom allows you to properly use the free space

Washer and dryer in cupboard with comfortable and functional shelves and boxes

Let's start with the positives.


The cabinet for the boiler above the washing machine closes it well from prying eyes and serves as additional storage space

The built-in wardrobe can only be installed in large rooms. It needs a lot of space, so small apartments Unfortunately, this option is not suitable.

Rack with open shelves above the washing machine in a small bathroom

The only negative is that you may not notice the leak in time if the washing machine is installed inside. Also, the cabinet may be short-lived, but this will depend on the material that you select for its manufacture.

A white homemade cabinet above a washing machine installed in a niche

Minimalist bathroom with under cabinet washing machine

The choice of building material

Cabinet above the washing machine made of white semi-gloss laminated chipboard, made by myself

Before choosing building materials, careful and accurate measurement of the bathroom and washing machine is necessary. different models have different dimensions. Then you need to make a drawing, taking into account the dimensions of the cabinet. It should be 3-4 cm wider than the washing machine.

A small wall cabinet above the washing machine in a niche

In terms of height, choose the option that suits you best, it can vary from 2 to 2.5 meters. The higher the design, the greater the number of functional shelves. Please note: high construction unstable. The dimensions of the closet must match the dimensions of the bathroom, large furniture in small rooms looks ridiculous and takes up a lot of space.

Moisture resistant MDF for the manufacture of bathroom cabinets

After measuring, we go to the store and select a moisture-resistant MDF, which is the most suitable and budget option for making furniture. It's comparatively new material, which is obtained by pressing finely dispersed dry sawdust. But at the same time it is very resistant to aggressive impact. environment. At choosing MDF it is worth paying attention to the thickness, choose the desired color and texture. It must be PVC-coated. additional protection from moisture. The thickness of the MDF requires at least 19-20 mm, with such parameters the cabinet will come out very reliable and withstand washing machine which weighs about 80 kg.

Carefully examine the surface of the product for chips and scratches. Start making.

Cabinet making equipment and tools

From the tools you need a fairly standard set:

  1. drill;
  2. screwdriver;
  3. jigsaw;
  4. metal corners;
  5. screws;
  6. tape measure, pencil.

Before manufacturing the locker, we calculate the dimensions of all parts. Intermediate shelves will be 10-15 mm shorter than the bottom and top walls. We make markings and cut out the details to an individual size. Can be ordered already finished material which is cut on a special machine.

Details of the future white MDF shelf

Step-by-step instruction:


A cabinet with a typewriter inside and with shelves built into a bathroom niche

In some cases, the washing machine is not closed with a door, and it harmoniously "fits" into new interior. A white washing machine can be placed in a classic snow-white bathroom, and metallic gray will suit a bathroom with gray ceramic tiles.

Large cabinet above the washing machine near the shower

If there is no time and opportunity to place a cabinet, a simpler and more affordable option- placing shelves above the washing machine. It is also possible to store various accessories that are necessary in daily care on them.

Convenient shelves above the washing machine

You can make them from improvised material, for example, pieces of MDF that could be left after the repair of the apartment, or from glass covered with a film (for easier maintenance).

Spacious, self-made, enclosed bathroom cabinet

Cabinet-pencil case for the bathroom with a place for a washing machine

Buy ready-made furniture, or create a budget and most suitable universal rack or cabinet in terms of dimensions? In any case, the choice is yours.

Corner cabinet with built-in washing machine

Washing machine in a small bathroom with comfortable and functional cabinets and shelves

Video: Swing cabinet with washing machine inside

Photo selection of cabinets for a washing machine in the interior:

Dimensional household appliances, compact furniture, a small area is an eternal problem faced by apartment owners. Traditionally, the layout of the living space provides for a small kitchen, bathroom or bathroom. Therefore, there are few options left for placing the washing machine. To arrange household appliances compactly, beautifully and conveniently, you can use a cabinet for a built-in or stationary washing machine. The product is made according to individual sizes, which eliminates the complexity of using the unit and problems during installation.

Saving space is a decisive factor when choosing furniture for large built-in appliances. smart project, original design cabinet models allow you to create the illusion free space, as well as arrange products compactly, ergonomically. In most cases, washing machines are installed in the kitchen or bathroom, built into specially designated niches or modules. Such a cabinet helps to solve the following tasks:

  • space saving. Actual problem, which almost all homeowners face, is a compact installation of overall household units. Mounting the washing machine inside the cabinet frees up room space;
  • aesthetic appeal of the work area. Regardless of the room in which the closet will be installed (kitchen, bathroom), the room “wins” in terms of aesthetics. Household appliances will not attract the attention of guests if you hide them behind beautiful furniture doors;
  • rational use of free space. There are models of furniture for household appliances with additional sections, shelves, drawers. Internal filling depends on the dimensions of the installation space. Inside you can install baskets, nets, shelves for storing detergents;
  • spectacular room design - furniture for rooms with high humidity can be made from moisture resistant materials, arrange doors decorative facades, execute the product in appropriate style so that all the furniture in the room looks like a single ensemble;
  • maintaining order and ease of cleaning the premises. Neat arrangement of equipment inside the cabinet simplifies the process wet cleaning in the bathroom or in the kitchen. Housewives can put on shelves various items personal hygiene, household chemicals.

An additional plus of installing a washing machine in inner space cabinet - soundproofing of working equipment. As a rule, washing machines work loudly on the spin options. The walls of the cabinet create some barrier to noise and vibration, performing a noise-absorbing and soundproofing function. The top panel of a small cabinet built under the sink can be used as a convenient shelf for placing various accessories, small items, and hygiene products.

Kinds

The best solution for small rooms is a cabinet for a washing machine. If you draw up a successful project, you can find a place for mounting internal shelves, cabinets, a symmetrical arrangement of the dryer. Furniture design subject to availability free space, the size of the washing machine. In the conditions of modern housing, equipment is placed in kitchen space, bathroom, hallway. These conditions determine design features cabinet models, choice of materials and decorative design, execution of doors, if they are provided for by the design drawing.

According to the material of manufacture

To install a washing machine, you need to take into account the humidity of the room when choosing materials for the manufacture of furniture. Installation of appliances in the hallway allows you to implement any solution, but the bathroom needs moisture-resistant materials with a long service life. Another important point- dimensions and weight of the machine. For installation of heavy models it is necessary to use durable materials foundations, high-quality fittings, stable constructions. Types of cabinets for washing machines according to the material of manufacture:

  • MDF boards - standard solution for the kitchen, hallway, but in the bathroom, furniture parts at the joints are exposed to moisture and serve for a short time. MDF wardrobe can be given any shape, choose interesting color scheme, use spectacular decor;
  • natural wood treated with special moisture-repellent compounds. Wooden cabinets fit perfectly into the interior, they are distinguished by a noble shade, environmental friendliness natural material. Furniture from natural wood stable and durable, but does not tolerate moisture;
  • glass combined with metal interesting solution for installation of built-in units. The washing machine behind the glass doors looks unusual, neat, expensive. Modern technologies glass processing gives the material additional strength, hardening, texture, matte, satin effect;
  • plastic cabinet - ready-made version. Such models are not uncommon in houses and apartments due to their low cost of products. Plastic does not collapse from exposure to moisture, mold and fungus do not appear on it. You can choose a cabinet for a washing machine of any color. Significant minus plastic furniture- fragility;
  • a furniture shield is an unusual, but quite justified option for installing a washing machine in the kitchen or in the hallway. furniture board – natural material made of oak, beech, ash, birch wood. The tree is dissolved into small planks, which are securely glued together. The shield is durable, strong, beautiful.

The materials for the manufacture of a cabinet for built-in appliances must meet the operating conditions of the furniture. For wet rooms moisture-resistant materials are suitable, in rooms with normal humidity and stable temperature regime you can install furniture from any material. Great importance It has functional content, equipment, place of installation.

Wooden

Glass

By location

In an apartment, house, in the country, there are not many places where you can install a cabinet for a washing machine. Of course, at the whim of the homeowner, equipment can be placed even in the living room, but such a solution is irrational, aesthetically unattractive and impractical. For installation of overall equipment, you need to choose suitable furniture, install the product in the most convenient place. There are only four acceptable options for installing washing machines in a closet - bathroom, kitchen, hallway, toilet (extremely rare). In addition, furniture can be arranged in different ways in the free space:

  • hinged version - the cabinet does not touch the floor with its legs, it has a countertop, under which a washing machine is placed. On the one hand, the furniture structure is provided drawers or shelves. There are no doors, the model is suitable for mounting front-loading machines. It is difficult to call furniture a full-fledged wardrobe, but the solution is often implemented in narrow bathtubs, combining appliances, a sink, and shelves. Another option is to mount an oversized washing machine with a small load on the wall;
  • a floor cabinet is the most common way to build in household appliances. The free-standing design allows you to hide communications, a washing machine, and place above it hanging shelves, racks, other furniture products. Suitable for completing bathrooms, kitchens, corridors. If the possibilities of the room allow the installation of doors, the unit will not gather dust and become dirty. A small cabinet is sometimes called a cabinet for a washing machine due to the compact size of the product;
  • high cabinet column (pencil case) built-in or stationary type. The model is located in narrow space bathroom, kitchen, rarely hallway. The lower part of the furniture serves to install a washing machine, on which they mount dryer. On the mezzanine tier there are shelves for storing household chemicals, bath textiles, cosmetics and other necessary items. The upper module can be equipped with hinged doors;
  • module or niche kitchen set. Variants of stationary installation of furniture, full or partial embedding are allowed. With full embedding, the machine can be hidden behind the front doors, giving the room a neater look, the effect of a spacious room. Exist big choice equipment installations - the end of the kitchen set, a bar counter, if the machine is top-loading, a module with closed doors. With partial embedding, the equipment is placed under the countertop on a free niche.

AT narrow hallway you can mount a built-in wardrobe along the width of the room, place a washing machine in the lower part, and use the upper tier for mounting a mirror with lamps, shelves, mezzanine for accessories. By location, cabinets for washing machines are conditionally classified into floor, wall, columns (pencil cases), cabinets, and by the method of installation - free-standing models of a stationary type, furniture of full or partial embedding.

Floor

Modular

By design

The design of cabinets for built-in appliances is determined by the size of the furniture and the installation location. At the same time, the aesthetics of the model must correspond to general style and room decor. Ready-made furniture for washing machines can be conveniently located only in large rooms. In custom-sized projects, you can implement a variety of design ideas. The most popular cabinet design solutions:

  • corner design - two sidewalls of the cabinet are in contact with adjacent walls of the room, two more serve as front panels. One front panel can be equipped with doors, and the second can be left open to accommodate the washing machine and shelves;
  • floor-to-ceiling built-in wardrobe with two to three sections. In the lower left or right corner, an open niche is left for installing a washing machine. The model fits compactly in the hallway;
  • narrow cabinet for installation in the bathroom with a superstructure. The lower part of the furniture accommodates a washing machine, closed with doors, in the upper superstructure there is a mirror cabinet with shallow shelves for small items;
  • vertical case for installation of equipment with a front loading drum. The furniture belongs to the classical stand-alone products of the stationary type. According to the presence of free space, the product is completed with one or two doors;
  • horizontal floor version in most cases, they are installed along the length of the free wall, combining with the sink, functional shelves. The machine can be closed with doors or located in an open niche.

When choosing a cabinet design, you need to consider the presence of doors. If the furniture is equipped with hinged doors, there should be enough space for the doors to open freely.

On the small footage you can install a cabinet with folding fronts or hang a panel that moves along the top rail according to the type sliding system coupe. Too much narrow rooms require non-standard approach to the installation of appliances - it is convenient to use a cupboard cabinet with a washbasin built into the countertop.

Vertical

Horizontal

To size

The cabinet for embedding appliances is made according to the size of the washing machine. The dimensions of the model are the starting point when choosing the design, shape, and size of furniture. All automatic machines are classified into vertical (top loading) and horizontal (front drum) units. This must be taken into account when designing furniture. In addition, models of equipment are built-in, with removable top covers and freestanding. You can place any washing machine in the interior of the cabinet if you correctly calculate the dimensions of the equipment and connect the communications. Features of calculating the dimensions of furniture according to the size of the unit:

  • frontal full-size model - standard height is 890-900 mm, there are options with a height of 850 mm. The depth of the machine is standard 600 mm, there are narrower models with a smaller drum capacity - 350-400 mm, ultra-narrow - 320-350 mm. At the same time, almost all front models are 600 mm wide, except for compact specimens (680-700x430-450x470-500 mm);
  • the overwhelming majority of vertical models have a significant height of 850-900 mm, compact dimensions in depth - 600 mm and width - 400 mm. When installing vertical models, no additional space is required on the front side of the cabinet, that is, in the area of ​​​​the doors. Often the convex hatch of the drum interferes with the integration of frontal equipment - there are no such problems with verticals;
  • the dimensions of the cabinet must correspond to the dimensions of the equipment with an additional gap between the walls of the furniture and the machine body of 20-30 mm, so that the unit does not break during the spin cycle furniture design. It is not recommended to mount a cabinet with a plinth - the equipment will vibrate, gradually moving to the side, front or rear walls of the furniture;
  • installation of horizontal cabinets involves the installation of furniture under the sinks in the bathroom. Then a compact machine (700x450x500 mm) is suitable for installation. If the unit is installed under kitchen worktop, its height must be at least 1000 mm - the tabletop does not lie on the machine body, but is attached to back wall. For vertical units, you need to leave room for opening the hatch;
  • installation of cabinets of a vertical design allows you to mount the module from floor to ceiling, but the width of the product must be at least 650 mm, the depth varies from 350 mm (narrow appliances) to 650 mm (deep frontal models). Vertical units require a height of 850-900mm and a cabinet depth of 600mm plus a clearance of 20-30mm per side.

Manufacturers of built-in appliances indicate the dimensions for installation in the instructions. If you need to install a stationary unit, the furniture is made according to the dimensions of the machine, taking into account the space for the convex hatch of the drum, if the model is mounted behind closed facades. To compensate for the corners of the room and furniture set, it is convenient to install the design with radius doors, choose a washing machine with a convex front panel and place it in a closet niche.

Selecting a location for installation

The rules for installing embedded equipment require a competent connection of communications. In this regard, it is most convenient to mount the washer in the kitchen or in the bathroom - next to the water supply for water supply, sewage to drain. If the installation is carried out in the corridor, you must first make the wiring of the system, and then install the cabinet. It is possible to equip a separate laundry room only in large houses / apartments. Basic rules for choosing the installation site:

  • The best option is the bathroom. There are several ways to implement the idea: remove the bathroom, put a shower stall and a vertical pencil case under the washing machine in its place (the cabinet material must be moisture resistant), mount a corner structure with additional modules, shelves, install compact appliances under the washbasin - sinks are mounted on the countertop or installed on top;
  • a rational idea is to install a washing machine in the kitchen. In a spacious room, the cabinet is mounted separately. AT small room do working area dryer and machine on one side of the line, dishwasher, microwave on the other kitchen appliances- on the other hand, the central part is a sink, wall cabinets for dishes. Another option is to mount the front machine at the end of the headset;
  • a practical solution is to install a cabinet with a washing machine in the hallway (corridor). If the room is narrow, built-in furniture will fit the entire length of the "short" wall - functional and simple. square corridor equipped with a wide straight or narrow corner design so that the opening of the closet does not interfere with entering / leaving the room. In the hallway, the unit is closed with facades, otherwise the car looks out of place, unattractive;
  • a situation without an alternative - the installation of furniture in the toilet. Separately parked car it’s easy to imagine in the bathroom, but the closet is a serious matter. There are few solutions - a cupboard cabinet for compact appliances in the corner, you can install top cabinet above the washing machine and hide on the shelves various accessories, toilet utensils, detergents, household chemicals.

Despite the fact that washing machines are difficult to fit into small rooms, appliances fit well in furniture with a built-in installation option. This allows you to free up space, neatly position the washing unit, use the space with maximum benefit. It is important that the cabinet can be made for any size of equipment, to give the product an interesting appearance, organically fit into the decor of the room.

Linen niches

Every housewife is interested in the issue of practical, compact placement of household appliances. But we must not forget about the details - somewhere you need to put dirty linen, put detergents, store bath and toiletries. It is customary to leave such things in the bathroom, so linen niches are equipped in this room. To compactly accommodate both the washing machine and the functional elements of filling the cabinet, you can make the design as follows:

  • mount vertical cabinet a pencil case, in the lower part of which to install equipment, and use the upper module for a built-in basket;
  • equip a horizontal cupboard cabinet, sinks in this option are cut into the countertop, use one piece of furniture (left or right) as a linen niche;
  • the hanging model of the cabinet, in which the appliances are installed on the floor, can be equipped with a capacious niche for a basket. Nevertheless, it is recommended to close it with doors.

Of course, you can equip built-in baskets in the kitchen or in the hallway, but in the first case, things will additionally be saturated with food smells, and in the second, you should not combine clean outerwear in the corridor compartment next to the storage niches dirty laundry and home textiles. In addition, baskets outside the bathroom look untidy.

Installation of equipment in the cabinet - perfect solution for small rooms and spacious rooms. Washing machines do not make such a loud noise when the units are located behind closed doors. You can equip the bathroom, kitchen, hallway or toilet with built-in furniture. Production of products according to individual dimensions allows you to carefully place units with vertical and horizontal loading.

Video

A photo

The dilapidated Khrushchev and Stalinka buildings, where many Russians still live, have little usable space. This also happens in modern studio apartments. In such cases, there are problems with the bulky household appliances: dishwashers, refrigerators, washing machines. It is the washers that usually “roam” around different rooms: bathroom, toilet, kitchen or laundry. There are times when a washing machine in the hallway is the only way out. Let's talk about how to hide SMA in such a room.

How to install a washing machine in the hallway

If a free area allows you to bring the machine here, use it. But you need to measure the distances and decide whether it is possible to install equipment there: whether it will interfere with the passage, opening doors and other manipulations. Also think about how to connect it to communications and the power grid. Narrow models will suit you best.

The main problem when installing SM in a hallway or corridor room is the lack of direct access to water and drains. To connect to them, you will have to make holes for the outlet of hoses in the nearest wall of the bathroom, toilet or kitchen. If the wall is load-bearing, it can be carefully drilled, but this will require high costs time and effort. Don't forget an available free socket.

Important! It is strictly forbidden to use extension cords with such a connection - the machine needs a separate stationary socket with grounding.

If the machine is located directly across the wall from the bathroom or kitchen, where its communications will go, then there will be no difficulties with installation. But if you plan to put it through the passage, consider how to build communications into the floor, otherwise the drain and inlet hoses will get in the way. In this case, it will be almost impossible to get correct angle drain hose outlet.

Organization of the drain

When installing, calculate at what angle it will come out drain hose machine, so that water does not stagnate in it and does not appear bad smell. And also check if it is possible to transfer the water main. Do not excessively lengthen the drain hose, as this will cause an additional load on the pump, which, under an unfortunate combination of conditions, may break.

The length of the hose must not exceed 3 meters.

On a note! When installed opposite the doors of a bathtub or toilet, you can not connect the SMA to the sewer, but direct the drain hose into the bathtub or toilet bowl using the U-shaped hook that comes with the kit.

Water connection

If you can connect the drain from the equipment either directly to the sewer or using a siphon, then there are several options for connecting water:

  • Compression sleeve for connection metal pipes. A connection hole is created in the pipe, a coupling is placed on the pipe, and a ball valve with a 3/4 threaded outlet is placed on it. An inlet hose is connected to the outlet.

  • Crimp sleeve for connection to metal-plastic pipes. After inserting into the pipe, the fitting is connected. The connections are sealed. A tap is attached to the fitting, and a filling pipe is attached to it.

  • Tee when connected via a basin mixer. At the junction of the water supply lines and the mixer hose, a tee is screwed in, to which the tube from the machine is connected.

  • A tee, if there is a water outlet in the wall. The equipment is connected directly to it through a crane.

How to fit into the interior

SMA may look strange in the hallway and not fit design decision. To avoid this, hide the appliances in a closet, cabinet or behind the wardrobe doors. Then usable space on the car and above it will be used, and the technique will not spoil the view of the corridor. Hang shelves above the machine and occupy them with laundry detergents and household chemicals. If space permits, install (hang) a drying cabinet.

Curtains and blinds available. When using them, it is important to conveniently fix the eaves, as well as to choose the material to match the entire room.

The ideal place to install a washing machine is a separate laundry room. I.e small room, which is a home mini-laundry room with a washer, dryer, laundry baskets and a supply of household chemicals. However, for most of us, a separate laundry room is nothing more than a dream. Therefore, it is necessary to integrate the unit into those rooms that have other functions. Where and how to position the washing machine so that it does not interfere, does not spoil the picture and does not create inconvenience?

Washing machine in the bathroom

One of the most practical solutions for a medium-sized bathroom - installation of a washing machine under the countertop with a washbasin. In this case, the place above the "washer" is used properly. In this case, the machine can either be closed ( furniture facade, blind), or leave it in plain sight.

In a large bathroom, it is advisable to build a so-called utility cabinet - in it you can hide not only a washing unit, but also, for example, a water heater.

If the wall along which the bath is installed is long enough, you can fit the machine into a corner. If there are free centimeters, it is desirable to build a partition between the bathroom and the machine. Firstly, it effectively zones the space. Secondly, the machine is not filled with water. The partition can be made useful by providing it with niche shelves from the end or from the side of the bath.

If there is very little space, you will have to sacrifice something: for example, abandon a full-fledged bath in favor of a seated model or shower enclosure. Some say goodbye to the sink forever, getting used to washing over the bath.

There are also custom solution- a washbasin located directly above the bath tank. This is easy to implement if you purchase an asymmetric bathtub. Such a model is offered, for example, by Ravak (“Be Happy”).

A washing machine in the hallway is a convenient, but extremely rare solution. But if there is nowhere to put the machine in the bathroom or in the kitchen, especially if you are the owner of a small-sized “Khrushchev”, installation in the corridor or hallway is the best option.

If the corridor is the only comfortable spot for a washing machine, the connection will not be difficult. The main thing is to follow the rules, taking into account the features of the equipment and premises:

  • Installing a washing machine in the corridor is possible if the area allows. On two square meters there is nowhere to turn around, let alone put a car. Take into account all the furniture, the door opening radius and the area of ​​​​the entire room so that the car fits completely and does not interfere with walking.

  • Distance from the sewer creates difficulties. Firstly, it will be necessary with their insufficient length. Secondly, such a connection will create an additional load on the pump, because of which it may serve less than the prescribed period.
  • If there is a niche, you can take the car into it, saving space. If there is no niche, you can build it yourself.
  • The dimensions of the machine must be taken into account. Give preference narrow model so that it fits perfectly.

  • If you do not want guests to get into the “laundry room” when entering the apartment, remove the typewriter from prying eyes.

Installation options

We will figure out how to hide the equipment and build it in so that it does not catch the eye and does not clutter up the apartment. Thanks to the entrepreneurial spirit and imagination of designers, there are a lot of ideas that will tell you how to install the machine, making it inconspicuous.

Option 1. Wardrobe

This washing machine is hidden in a closet. Instead of a cabinet, you can use a cabinet or a cabinet with shelves for detergents.

Option 2. Door

How to embed a typewriter so that it is not visible at all? Do sliding door, as in a closet, and no one will guess that there is a powerful electrical appliance behind a beautiful door. Saving space along with convenience - you can place hangers nearby or hang shelves for washing products.

Option 3. Angle

If the task is not to hide the equipment, but simply to put it where it is convenient, the photo below shows such an option. There is little aesthetics in it, but it will be convenient to use the device.

Option 4. Curtain

Budget but no less interesting way- curtain. Today, the choice of textiles is so wide that you can pick up decent options that harmoniously fit into the interior and hide your "assistant". For fastening, use a special rod or cornice.

Is it possible to install SMA in the hallway? What about in the hallway? Of course you can! The main thing is to ensure that it is connected correctly and make sure that it does not distort interior solution. Connection details will be discussed below.

Home " headache» - how to hide hoses and tubes. If there is a kitchen or bathroom behind the wall near the SM, there will be no problems. But, if the washer is installed on the opposite side, how to connect it so that nothing interferes?

There is only one way out - to hide communications in the floor. But this is the task of the repairman. We will tell you about classic way connections:

  • Buy extended hoses for draining and water intake. Avoid docking, otherwise the risk of leaks will be high. It is advisable not to use hoses longer than 3 m.

Important! By extending the hose, in the event of a breakdown, you are unlikely to hand over the CMA for repair under warranty.

  • When connecting the drain, you must use a siphon or direct the hose directly into the sewer. We have already written about how to connect a washing machine to the sewer.

  • When connecting to the water supply, you can go in three ways:

If you have a separate exit in the wall water pipe, you can connect the drain hose there through the tap.

After connecting the "water" communications, take care of the electricity. The closer the outlet is to the car, the better. If there is no suitable outlet nearby, study the "" page.

To summarize: a washing machine is rarely placed in the corridor, but if everything is planned correctly and the appliance is connected correctly, no difficulties are expected.

Fitting © 2022 Design and interior of apartments