Three-layer fiberglass panels for house cladding. Cladding a house with brick panels: features, installation steps and prices of materials. Vinyl cladding materials
Solidity, practicality and attractiveness gives high-quality cladding. In addition, finishing works are designed not only to decorate, but also relevant for creating protective coating for walls from different negative factors. Facade panels are in particular demand for exterior finish houses that help increase the service life of different building materials. Also, facing coatings are considered an excellent method and soundproof the building. And what they are, we will consider in today's review.
By using similar material you can give new life even to an old building
Read in the article
Advantages of facade decoration
Laying insulation materials
Cladding material helps to reduce heat loss in the home. If a cavity is formed between the wall and the finishing plates, then it is filled with the Facade insulation option
After installation facade insulation, it should be closed with a wind barrier structure. Thin material can be used as wind protection. The thermal insulation effect depends on the quality of raw materials and the thickness of the layer.
Nuances of installation on the facade of the building
Laying of facade slabs begins with lower tier. The panels must be joined with a groove and tongue, and then screwed with self-tapping screws. Experts recommend using fasteners with a small length and a cap to ensure that the panels are firmly fixed to the crate.
The panels are mounted with a special adhesive applied with a notched trowel. The solution is distributed over the tile, which is applied to the surface of the wall and held for several minutes. Then the material comes off and after a few minutes is glued again. This approach improves the adhesion and durability of the material.
Note! Panels are attached from the bottom up. One row is laid, and the next one can be started in half an hour. Work should be done only in the warm season.
Huge advantage original cover is an opportunity and create an imitation of a beautiful natural finish. Wood or metal siding is used for cladding. It should be borne in mind that wood requires special care and treatment with protective impregnations. The frame can be made from a wooden or metal profile.
For the manufacture of facade decor from glass composite (fiberglass), only high quality materials. The basis of the products is the reinforcing material glass mat.
Fire-resistant gelcoat - serves to create a high-quality decorative coating, as well as to protect the material from ultraviolet radiation, atmospheric phenomena and mechanical impact. In the manufacture architectural elements they can be tinted in any color at the request of the customer, while avoiding painting works on the facade of buildings. Thanks to non-combustible polyester resins, the polymerization process takes place, the shape is retained and physical properties fiberglass.
The main advantages of facade decor made of glass composite (fiberglass)
. Ease
The thickness of the products is 5-6 millimeters, while the weight of 1m2 of surface development is 5-7 kilograms. Light weight allows you to mount the decor of almost any size.
It is recommended to use architectural decor from fiberglass (glass composite) when carrying out work on the reconstruction or restoration of the facades of old buildings. When the margin of safety load-bearing structures dilapidated building is small and it is required to minimize the load on the facade and foundation.
It is easy to carry out work on the installation of stucco moldings from glass composite at high altitudes with the involvement of industrial climbers in any season.
. Strength
The strength of the facade decor made of glass composite (fiberglass) is comparable to the strength of aluminum. This material has long been used in such industries as: shipbuilding (yachts, catamarans, various ships) and in the aircraft industry (airliner - Boeing 787 Dreamliner, almost entirely consists of composite materials).
. Durability
The tests carried out show that fiberglass (glass composite) can serve without loss of its properties for several decades, even in very difficult conditions operation.
Just look at the photos below and you can easily understand that such light and dimensional products cannot be made from any other material than fiberglass.
A beautiful and well-groomed house is a matter of concern for any owner. This is especially true for those who built a house from cellular concrete or by frame technology- such buildings need cladding. The traditional wet finish (plaster, paint) is not to everyone's liking, and besides, it does not modern requirements « good walls» (maintaining the required humidity and temperature conditions). Wood finish, even provided proper care, short-lived. Brick cladding creates a serious burden on the foundation and wallet (not everyone can stand it).
The modern market offers worthy alternative classical ways exterior decoration of the house - artificial cladding, facade panels. Among the many colors and textures, popular are Wall panels for exterior finishing of the house under a brick. Facing with such material gives the house a complete look and at the same time protects the facade from the destructive influence of mother nature.
Finished house PVC panels under the brick
Types of facing materials
The panels used for facade cladding are divided into types according to their structure:
Single layer. The thinnest and lightest, which are suitable for decorative finishes. If it is necessary to insulate the facade, they are mounted together with an insulating layer.
Double layer. They have a lower (inner) insulating layer.
Three-layer. Sandwich panels consisting of two outer layers, the gap between which is filled with insulation.
To size facade materials there are:
Composite. small size suitable for combining colors and textures.
Whole. Due to the significant dimensions, it is easier to work with them (labor costs and installation time are reduced).
Panels are also classified by application (basement and facade) and by material.
Thermal panel structure
Advantages and disadvantages of artificial cladding
Facing the facade of the house with brick-like panels turns it into an elegant building and therefore is in constant steady demand. Panels are widely used for finishing walls, building corners and basement: they are used to trim fragments internal partitions and fireplaces. Each type has its own advantages, but there are also common advantages:
Aesthetic. Panels imitating brickwork give the house a pleasing to the eye, respectable look.
Economic. artificial cladding houses with brick-like panels are cheaper than natural analogues and have a long service life (25-50 years).
Thermal insulation. Panels help improve (in varying degrees) thermal insulation of internal premises.
Protective. Serve reliable protection(especially for structures made of wood and aerated concrete) from moisture, solar ultraviolet radiation and temperature changes. Prevent surface corrosion and mold growth.
Corner panel mounting process
Mounting. Cladding with facade panels frame structure produced all year round: when mounting on glue, the temperature and humidity of the air matter. At the panels simple system installation - work is faster and easier than laying finishing bricks. Waste does not exceed 3-5%.
Operational. The panel under the brick is environmentally friendly, has good soundproofing characteristics. Finishing the house with brick-like panels withstands any weather conditions, does not crack or fade.
The disadvantages include:
Plastic components are flammable and release toxic gases in a fire.
Irreversible deformation (from impact or pressure) of some varieties.
Cladding with certain types of panels is very expensive (but still cheaper than real facing bricks).
During installation, in many cases, the services of professionals cannot be dispensed with - otherwise, a violation of the technology will affect the durability of the facade panels.
Facade materials for brick: an overview
Acrylic facade panels transform the look of the house
On our website you can find contacts construction companies, which offer the service of finishing and warming houses. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".
The appearance of the facade elements does not allow to distinguish them from the usual brickwork. Depending on the material of manufacture, they are divided into:
Plastic
Brick-like plastic panels can advantageously emphasize any style, from classic to high-tech. They belong to the budget option and are made from polymer materials. The parts are thin and need an additional layer of heat insulator. They have common qualities:
lightness and mechanical strength;
moisture resistance and frost resistance;
service life - 20 years.
The most common varieties plastic products are:
Acrylic front panels. They are minimally thick, lightweight and ideal for buildings on light foundations. The material is non-combustible, it can be mounted both on the crate and directly on the wall. In general, the fragility of acrylic spoils the positive impression - it does not withstand mechanical loads (it bends on impact), and it can burst in frost.
Vinyl facade panels(two-layer facade slabs PVC). A durable bottom layer prevents the material from deforming during temperature fluctuations, a decorative top layer repels dirt and protects from sunlight. Such an imitation of a brick for the exterior of a house is in demand due to its design - reliable connecting locks.
PVC plates in the cladding of a country house
The market has big choice plastic cladding with a brick pattern. Offered texture options(shabby, old, torn brick), allowing you to create unusual, memorable patterns when finishing. Thanks to the large collections from different manufacturers and a variety of decorating techniques, the house receives an individual look that matches the chosen style.
Fiber cement
The panels are used both for facade cladding and in interior design. Fiber cement is a composite (contains several components) material, which includes cement, mineral fillers and cellulose fiber. All components are mixed, pressed and dried. For the received monolithic base apply a finishing and protective layer.
Finishing the first floor with fiber cement
Features of fiber cement products include:
Frost resistance. The material withstands 100-150 freeze-thaw cycles.
Fire resistance.
Bending strength.
Environmental friendliness. Can be used in interior decoration.
Ease. The material is lighter than porcelain stoneware.
moisture resistance(water absorption: 7-20%).
Clinker finishing boards
Clinker thermal panels are ceramics for external cladding - they allow you to get a flawless facade. Composite material not only decorates, but also insulates the walls. It includes:
Heat insulator. Could be styrofoam mineral wool or penoplex.
Front (decorating) surface. Natural material - brick-like clinker tiles, ideally copying a brick wall.
Base. The layer is available in some types and is designed to facilitate installation.
Facing wooden house clinker slabs
Clinker panels have a lot of advantages:
Large selection of spectacular colors and textures. The material accurately reproduces brickwork. Many collections convey the aesthetics of a raw, sawn or aged surface.
Easy installation. They are attached with glue. Additionally, the panels are fixed to each other with locks and self-tapping screws (holes are provided).
Strength. Clinker facade panels are guaranteed to last 50 years.
Persistence. Panels made from high-quality clay with subsequent annealing do not fade and do not absorb water.
uncomplicatedmove. The surface is cleaned with water from a hose.
facade panels trimmed clinker tiles, have one drawback - considerable weight. This is a limitation for buildings with light foundations.
Polymer sand
The material for polymer sand panels is a mixture of polymer and fine sand. The lined facade naturally imitates natural bricks. Finishing the facade with polymer sand parts is beneficial for several reasons:
Low cost. Polymer sand plates are one of the most budget options.
Polymer-sand facade of a frame house
Easy installation. The parts are light and flexible: they are fixed on the wall with glue, additionally connected with self-tapping screws, protrusions and grooves.
Diversity. Great selection of colors and textures. The seams are often covered with fine-grained stone chips, which improve the appearance.
Strength. Panels cover both facades and plinths.
Fire resistance. The panels are labeled self-extinguishing, they include a flame retardant.
Porcelain stoneware
The material is obtained after pressing and annealing clay at a temperature of 1200-1300 °C. The addition of mineral pigments colors it throughout the mass. The properties of porcelain stoneware are:
Durability. The manufacturer guarantees 50 years of operation. Recall that fired clay amphoras survived a couple of millennia very well.
Strength. The material perfectly resists shock loads, abrasion and the desire of children to scratch it with a carnation.
Japanese facade panels for the exterior of the house
Low hygroscopicity. Hardened clay does not absorb moisture and is therefore frost-resistant.
Persistent color. Thanks to a special technology, the color does not change when used in any conditions.
Facade porcelain tile is heavy material. For facade cladding, it is hung on a reinforced metal carcass or put on high-strength glue. At negative temperatures porcelain stoneware laid on cement mortar, peels off easily.
Socle (polypropylene, polymer) cladding panels
The material for their manufacture are polypropylene resins with the addition of components that improve strength and color fastness. Brick-like basement cladding successfully imitates natural brickwork - to say exactly what is in front of you, you need to knock on the surface.
Plinth cladding under brick
Panels have many nice properties:
Profitability. Much cheaper than natural materials.
Quality. The manufacturer's warranty is valid for at least 50 years.
Strength. It is not afraid of moisture, mechanical shocks, solar radiation, temperature changes (does not lose its properties from -50 to +50°C).
Installation and operation. Facing takes little time, subsequent care - even less. Dirt from the base is washed off with water as it gets dirty.
Ease. Facing with plinth panels will withstand any foundation. The weight of 1 m² of basement cladding is 3-5 kg (decorative brick weighs 23 kg, fake diamond- 35 kg, finishing brick- 180-190 kg).
Video description
About the principle of mounting facade panels in the following video:
fiberglass panels
To get fiberglass cladding panels for the facade of a brick house, fiberglass with resin additives is used. Panels authentically stylized for brickwork and others natural materials(wood and stone) and differ:
Long service life without repair and maintenance.
Durability (resistance to sunshine and weather quirks).
Easy assembly (and disassembly).
Facade thermal panels: high-quality cladding and reliable thermal insulation
Thermoplates or sandwich panels
Each plate has a three-layer structure - it consists of two metal (rarely plastic) sheets, between which there is a heater. Elements acquire strength after being connected under high pressure. Their properties include:
simple installation;
durability and good price-quality ratio;
light weight;
sound and heat insulation;
moisture resistance.
In thermoplates, the insulation is a layer of foam or polyurethane foam; in sandwich panels, polyurethane foam, mineral wool or expanded polystyrene is used.
Video description
About the process of laying basement panels in the following video:
Facade paneling: installation methods
The installation of facade elements resembles a children's puzzle - the parts are joined “in a lock”, creating a surface without visible seams. Additionally, the fastening is reinforced with self-tapping screws and clasps (brackets). Several mounting methods are widely used:
directly to the facade. The method is suitable if the wall surface is perfectly flat; otherwise, it is pre-aligned. Plates are attached with glue or mortar.
Sheathing the house with facade material
On the crate. The method is suitable for most facade materials that are mounted on a prepared frame.
Hanging facade. System for ventilated facades. The design consists of a bracket (attached to the wall with anchors), a set of galvanized steel profiles and cladding panels (thermoplates). between the wall and decorative panel there is room for air circulation.
Video description
About testing facade materials for combustibility in the following video:
Facade decoration: installation steps
The technological chain of installation of facade panels is as follows:
1. Surface preparation
On a flat wall, the panels are evenly laid and firmly held; otherwise, moisture will accumulate in the remaining irregularities and voids. In order for the surface to meet the standards, it:
check building level(with a deviation of more than 2-3 cm, the walls need to be leveled);
clean from the old coating (plaster, paint), nails;
eliminate protrusions and plaster recesses;
handle protective equipment(wood);
apply a primer.
Thermal panels in the decor of a country house
2. Frame construction
If it is difficult to level the walls, a metal or wooden crate is installed on them, and:
design parameters are calculated in advance;
crate step - 35-45 cm;
insulation is laid between the crate and the facade of the house.
3. Cladding installation
When installing facade elements, the following rules are observed:
At the lower boundary, a starting (drain) bar is installed - it aligns subsequent rows and serves to remove condensate.
Parts are mounted in rows, from bottom to top; fastened with dowels or screws.
A gap is left between the panels and profiles, taking into account the thermal deformation of the material.
The next row is installed after the previous one is fixed (and checked by the building level).
Joints (seams) are hermetically sealed facade grout suitable color.
Wall decoration with plinth panels
Facade materials: prices
A variety of brick-like wall panels for exterior decoration are presented on the building materials market. The cost of some materials (Moscow region):
Plastic front panels. Wall and basement parts with a size of 0.39-0.45 m 2 cost 220-550 rubles. (per piece, average price range).
Fiber cement panels. The cost is affected by the material of the coating and filler. Panels with an acrylic protective layer cost from 1700 rubles. apiece, with ceramics (Japanese) - from 3100 rubles.
Thermal panels. The cost is formed depending on the material of the filler and is 1750-2400 rubles.
Thermal panels with clinker tiles. The cost varies between 1250-2300 rubles / m 2.
Conclusion
To “dress” a house with brick-like panels means to make it not only more beautiful, but also more functional. Artificial cladding protects and insulates the walls, increasing the energy efficiency of the home. Attractive price excellent performance and easy installation are factors that make facade cladding under the brick ideal solution In most cases.Exterior decoration is important for any home. It gives the facade a finished look, protects the walls from the negative effects of precipitation, temperature, wind. A feature of modern facade materials is a unique combination of practicality and decorativeness. Facade panels for exterior decoration of the house are very popular. They allow you to quickly make the facade neat, help to fit it perfectly into the surrounding landscape.
The demand for facade panels for exterior decoration is explained not only by the variety of colors, materials, shapes and sizes, but it is also associated with a number of advantages:
- paneling allows you to quickly restore a well-groomed appearance even to an old building;
- installation is carried out quickly, does not require complex preparation of walls;
- fastening is carried out using self-tapping screws, brackets;
- on the wall, facade panels can be placed vertically, horizontally;
- the front surface is varied in color and texture.
In addition, such a cladding reliably protects the walls from temperature extremes, exposure to wind, precipitation. It improves sound insulation, reduces heat loss from the building. She has few downsides. Quality materials will cost a lot, and for installation it is often necessary to turn to professionals for help. However, durability, practicality and aesthetic appearance finished coating quickly pay back the investment.
The stores offer different types of facade panels. They are made of metal, glass, porcelain stoneware, fiber cement. Each type has its own advantages, disadvantages, features of installation and care of the finished coating.
Keramosiding
This is enough new material made from a mixture of clay and fibrous silicates. Due to the multi-layer coating, it looks like ceramics. For coloring the surface, inorganic, fluorine-containing, silicon-acrylic dyes are used. Facade panels made of keramosiding are suitable for facing houses made of brick, concrete, reinforced concrete. They are distinguished by such advantages:
- high resistance to factors external environment(ultraviolet, frost, moisture);
- increased heat and sound insulation properties;
- fire resistance;
- environmental Safety;
- Huge selection of colors and textures.
Panels are suitable for any climate. The front part accurately conveys the texture of natural stone, brickwork, plaster. It is difficult even for a specialist to notice the imitation. The material does not fade, so if necessary, you can replace one panel and it will not be noticeable.
The disadvantages of ceramic siding include the complexity of installation. In the absence of experience and, especially, in the performance of work at height, it is better to turn to professionals. Otherwise, it will be difficult to achieve a high-quality result. Due to the rather large weight of the panels, it is necessary to first calculate whether the base can withstand the cladding. It is not recommended to use for wooden houses.
fiberglass
He is composite material, based on fiberglass and polyester resins. The area of the paintings varies from 1 to 3 square meters. External coating successfully mimics a natural stone, wood, brick. Its advantages:
- durable, reliable;
- durable;
- heat resistant;
- not afraid of moisture;
- does not fade in the sun.
The disadvantages of the coating include low heat and soundproofing ability. Therefore, a reinforced insulation device is required. Such coverage will not be cheap. Although the installation and dismantling of panels is not difficult, thermal expansion and contraction of the canvases from temperature changes should be taken into account. As a result, cracks appear on the surface.
There are several types of fiberglass panels:
- fiberover - an opaque sheet of any color, has high decorative and operational characteristics;
- fiberlight - transparent sheets, often used in the construction of greenhouses or for arranging roofs;
- fibroton - tinted plates that provide an aesthetic appearance of the facade.
Another popular variety is thermoplastic facade panels. They are made of polyester fiberglass, which is resistant to corrosion, the formation of fungus. They are durable, allow you to realize any ideas of the designer.
For cladding, opaque corrugated facade panels with a large wave are more often used. They are distinguished high strength, while they weigh a little. Installation of fiberglass is quite simple. It is attached to the wall with dowels, screws or sealant. To hide the holes from the fasteners and mask the seams between the sheets, use mastic. After drying, it is cleaned and stained.
Sandwich panels
Their feature is layered construction, which combines insulation and decorative coating. The outer layers are made of metal (alloy of aluminum, manganese, magnesium), approximately 0.5 mm thick. Inside the sandwich contains a heat insulator and a layer of vapor barrier ( aluminum foil). The insulation is made of polyurethane foam, mineral or basalt wool, fiberglass, polystyrene foam.
The material isolates the premises from sounds from the street, perfectly tolerates temperature changes over a wide range. The front covering is performed in the form of plaster, wood, stone. Advantages:
- durability;
- fire safety;
- resistance to corrosion;
- low thermal conductivity;
- high bending strength;
- not subject to swelling.
Sandwich facade panels do not create a large load on the foundation, therefore, they do not require its reinforcement. In order for the sandwich to serve for a long time and fully show its advantages, care must be taken during transportation and installation. Sharp blows to the panels can lead to dents, scratches, damaging not only the outer frame, but also the inner canvas. If the installation technology is violated, then freezing of the panels at the joints is possible.
Despite some shortcomings inherent in sandwich panels, they are very popular. So there are varieties all the time. One of them is the cassette profile. It is a structure made of thin sheet steel, into which a heater is inserted. Outside, the facade is fixed. The thickness of the cassette profile is selected taking into account climatic features building placement. For comparison: the thermal insulation properties of a 10 cm thick cassette are comparable to the characteristics of a 60 cm thick aerated concrete wall or 140 cm brick.
Additional elements are required for the installation of sandwich panels. They will close the ends, joints, help hide the joints, give the cladding a finished look. Installation is carried out on the frame using self-tapping screws. If it becomes necessary to cut the panel, then this should be done with metal scissors or a saw. You should not use a grinder or laser cutting: the thermal insulation may peel off from the cladding, the anti-corrosion coating will be broken.
The panels are usually installed horizontally, installation begins with the installation of a basement flashing. The first row of sandwich panels is laid with a groove down, fixed with galvanized screws and rubber washers. Having laid one row, move on to the next. The joints will need to be sealed with foam or mineral wool, then they can be closed with a flashing. Weather do not affect the installation. But it should be noted that when working with a sandwich panel containing mineral wool, it is undesirable to lay it in the rain. From high humidity deterioration of the insulation properties.
Maintenance of the coating is reduced to periodic inspection and cleaning from contaminants without abrasive products. Identified scratches need to be cleaned of rust and painted over.
metal panels
They are made of galvanized steel and aluminum with a smooth or perforated surface, no more than 0.55 mm thick. Aluminum facade panels are lighter than steel, but less durable. To protect against corrosion, they are coated with polyester, pural, plastisol. They are used for facing wooden, brick, block houses.
The main advantages of metal panels include:
- retain excellent characteristics throughout the entire period of operation;
- have high resistance to precipitation, temperatures, ultraviolet, acids, alkalis;
- facade care is reduced to washing with water and detergents;
- simple installation.
Metal well protects the building from electromagnetic radiation. The facade will last long years without repair. The minus of the material is only in its high thermal conductivity. Therefore, it will be necessary to lay a layer of insulation. Panels are mounted horizontally, fixing them on vertical rails.
Fiber cement facade
The main component of the panel is cement, the rest is mineral components and cellulose fibers. The front part is covered with acrylic, polyurethane, sprayed stone chips. Panel advantages:
- frost-resistant;
- durable;
- do not burn;
- long retain the brightness of the color.
They also have excellent heat and sound insulation properties, elasticity. Minus the material in the need to paint after installation. It does not tolerate strong impacts, it has a high water absorption.
The surface of the plates is covered thin film light catalyst. It prevents the penetration of dirt inside, providing self-cleaning of the surface during rain or under a stream of water from a hose.
The panels are mounted on the frame or directly on the wall of the house. To do this, use hidden panel locks (clamps) if the plate thickness is less than 16 mm. To fix thicker plates, self-tapping screws or decorative nails are used. The seams between the joints are treated with grout. Due to its flexibility, the material allows you to easily veneer uneven surfaces.
Mounting technology
Panel mounting different kind has its own characteristics, which are indicated in the manufacturer's instructions. Compliance with the recommendations guarantees the durability and aesthetics of the facade.
Facade panels can be installed in any weather. However, it is recommended to do this in dry weather, preferably at positive temperatures. If the laying of insulation is provided, then first the crate is fixed on the wall. It is set according to the level, forming a flat plane. The frame is filled with insulation, applied on top vapor barrier film. Another layer of crate is arranged on top. Panels are attached to it by installing fasteners in special grooves. Installation is carried out from left to right, from top to bottom. Only after completing the previous row, move on to the next.
942 06/19/2019 7 min.
Exterior decoration of the house: one of the important components of the repair, thanks to it it becomes more solid, its appearance can be changed beyond recognition, a favorable atmosphere is created.
Among other things, finishing protects the house from aggressive factors of the outside world and this is another great way creating additional heat protection if you choose the appropriate panels with insulation and sound insulation.
Today, world technologies and improved finishing details are improving every day and it is easier and at the same time more difficult to make the right choice. What are the types of facade panels? What to buy and not regret it? After all, the price of a mistake is quite high.
Kinds
Facade panels are conditionally divided into several types, most often they are made from solid and composite material. Solid variations are characterized by increased dimensions, reduced labor intensity, and ease of installation. Learn about MDF wall panels.
In addition, the panels are: single-layer, two-layer or three-layer. The first option is made from a single ball of material, multilayer panels are distinguished by their strength, improved thermal insulation performance, first-class performance.
In addition, regardless of the layers, all panels are distinguished by their durability, if you have purchased Japanese facade panels for the exterior of your house, be prepared that they will serve you for more than one century.
For more information about facade panels, see the video:
What to choose: lightweight facade materials suitable for outdoor decoration or? This question is very individual, so manufacturers offer numerous options that should satisfy the needs of each buyer.
Panels can be wooden, plastic, metal. In addition, Fainbeer facade panels are quite popular.
Regardless of the material chosen, all models, and even clinker facade panels, comply with:
- long service life;
- excellent heat protection and high performance sound absorption;
- moisture resistance;
- they are strong and fashionable;
- you will spend a minimum of time, effort and money on their installation;
- environmental performance;
- all panels look quite attractive and harmoniously decorate the house, especially if you choose the right one plinth panels facade type;
- such structures are not afraid of rust, they are not subject to strong temperature changes, they quickly cope with ultraviolet radiation;
- before installation, there is no need to pre-prepare the walls. Regardless of the season, you can mount them;
- front deck panels for exterior decoration of the house are installed horizontally or vertically, it does not matter.
This type is used to make repairs. finished buildings, they mimic a variety of elements. The disadvantages include a number of additional financial costs and in many cases you will have to use the services of skilled workers, which will make construction more expensive.
This material is perhaps the most purchased and widely used. They are also called keramosiding sheets. This type appeared on the market relatively recently, it is based on cement with fibrous additives or with various silicates. They are produced in the form of plates, which can vary in size.
The advantages of this type include:
- improved heat preservation technology;
- resistance to fire, moisture, temperature changes;
- reliability;
- environmental friendliness;
- various color variations.
Polypropylene panels: market leaders and this trend has continued for many years. They consist of a polyvinyl chloride base, which is why they are often called basement sidings by the people.
You have probably seen this material many times on many houses, it is a lot of thin horizontal lines that are quickly and easily installed. The material is characterized by lightness, ease of care and affordable price.
In addition, the house, decorated with such a panel, looks well-groomed and stands out from the background of others. If we take into account the shortcomings, then they include:
- sufficiently high fragility;
- you will need to additionally insulate the house, you can immediately purchase facade thermal panels;
- panels according to their technical indicators do not mix well with other materials.
Finishing is often carried out with fiberglass sheets. They are made on the basis of fiberglass, a variety of resins are added to it. . The sheet may vary in size, maximum rate: 3 sq. m.
Using this material, you can choose and create any surface, even make beautiful imitation brickwork.
Can do exterior finish under a stone or, which is popular, under a tree and other natural materials, and for .
Among the analogues, they stand out:
- original external variations;
- strength;
- reliability;
- sufficiently long service life;
- frost resistance;
- heat resistance;
- ease of installation and dismantling;
- do not change their color under the influence of direct sunlight;
- resistant to water.
This type has almost no cons. Well, the only disadvantages can be attributed to a fairly high cost.
Thermoplastic facade panels are also on the market. The basis is polyester fiberglass, which has a different coating. Thanks to this, you can implement a variety of stylistic solutions, they are very easy and quick to install, they are durable and have a unique external design. Pro facade plaster will tell you about the foam plastic.
They are not affected by rust, fungus, and will serve and protect your home.
They are versatile and consist of many layers. Buyers often opt for this type precisely because of its unique properties. It is quite strong and moisture resistant, excellent sound and heat insulator, resistant to fire, convenient and easy to install.
Diverse color solutions allow you to realize the most original design projects. In addition to decorating the exterior of a house or other real estate, sandwich panels are used as insulation. There is one small drawback: the relatively large readings on the scales. Find out about warm plaster for the facade by.
They are produced in aluminum and galvanized materials, and they can have a smooth or perforated base. The edge of the panels for installation (with nails or self-tapping screws) is also perforated.
The thickness of one ball is 0.55 mm maximum. Sheets have a protective ball made of classic and matte polyester, plastisol, pural.
Sheets of aluminum are much lighter - the weight is not more than 7 kg / sq.m., but for the rest, the indicators of withstanding temperature changes are much higher. Take for example facade panels for brick-like exterior decoration, the price of which will pleasantly surprise you, they will also compete with this type. Find out about the putty consumption per 1m2 of wall at.
Polyester is based on polyester, which excels significantly for long-lasting color, glossy sheen and increased flexibility.
Pural is characterized by a denser structure, strength, and stability. Polyester matte color- a new type modified with teflon, in which there is no shine.
Plastisol can create a variety of textures, however, it does not react with alkali and acids. But, this material has one significant drawback: a relatively large weight when compared with other materials.
Facade panels under the tree contain wood, which breaks down into fibers under the influence of elevated temperature. Connecting component: special in nature polymer compounds found in plant fiber. This, of course, is about lignin, it is he who is released during hot pressing.
No phenol-formaldehyde resin is used at the production stage. It is the paint applied to the surface that will serve as a protective layer.. Thanks to this, during production, a three-dimensional wood or any other pattern chosen by customers is applied to the paint.
As a result, during installation, visually the material cannot be distinguished from natural wood. Panels can be processed in the future, they are sawn, drilled. Now next time you will determine exactly which house is made of natural wood and which is not ...
The significant disadvantages of this type of panels include low fire resistance. Flammability class G4 and deformation in high humidity. Therefore, this material is not often seen decorating someone's home.
Buyers are attracted by the fact that their coating is a hydrophilic inorganic film that cleans itself. Such a plate contains cellulose and plastic fibers (their rate is 10%). The composition also includes cement and mineral fillers (their percentage is 90%).
This type is used both at the stage of repair, facade works, so they are often used to insulate an already finished base, on. Installation of panels should be carried out using a system made of metal or wood, while the parts should be fastened with clasps. Read about outdoor work with wood putty.
facade ceramic panels, the dimensions of which you can choose yourself, based on the calculations made, belong to another type of panel that is available on the market today.
Ceramic panels are often chosen for high windiness in the area, and possible impact load to the facade.
This panel is 0.1 cm thick. There are many ways to mount such plates, but for safety reasons they should be glued. Take for this polyurethane adhesive with two components.
PVC
A frequently used sheathing for the home, because the finished layers consist of a polyvinyl chloride polymer. In addition, modifiers, stabilizers and other components are added to future layers. Vinyl facade panels can be easily connected and combined with each other, frames of selected dimensions are created.
These sheets are based on Portland cement. The filler is replaced by small chips, in addition, there are special components that help improve performance characteristics cement.
This material is highly resistant to moisture.. According to GOSTs, the slab, after lying in water for a day, will swell by only one or a maximum of two percent. Accordingly, this material does not rot, even if it is in constant dampness.
Conclusion
All of the above applies to facade finishing panels. They are popular among buyers, thanks to excellent performance and a large assortment.
The price of facade panels for exterior decoration of the house will pleasantly surprise you. In order not to wonder, you need to understand that the panels attract the buyer with a variety of textures, unlike plaster, shades of color and performance.
In addition to numerous advantages, facade panels for the exterior of a house Alta profile serve to insulate the house, the material retains heat and acts as a protective mechanism against the penetration of cold air.