Do-it-yourself installation of platbands on interior doors - step by step instructions. Installing platbands on the door: several installation techniques Do-it-yourself door platbands

The main goal pursued by installing platbands on the door is to hide the not particularly aesthetic joints of the door frame and the opening in the wall. Even with careful fitting of the frame, there are still gaps that are filled with foam or plaster on front door. When installing an interior room, they usually do not even do this. Beautiful framing of the entrance with platbands completes the decoration of the facade or interior.

What is a door frame?

In the construction business, this concept refers to a decorative strip, which is strengthened over the door frame next to the canvas. Platbands can be made from different materials, including modern plastic (PVC). There are several rules for choosing this interior detail:

• the material of the strip must correspond to that from which the door leaf is made;
• it is desirable to select the color as accurately as possible if the casing is purchased separately;
• the design style of the decorative element must match general style interior.

As a rule, trade organizations offer a whole line of products, the material and color of which correspond to the doors available for sale. When buying a new set, it will not be difficult to choose the right one right on the spot.

The most common platbands are made of MDF. The material has an attractive appearance, can imitate different types of wood, include additional decorative elements. Most cheap option platband - pressed paper or plastic. Thanks to modern methods surface finishes look quite aesthetically pleasing and such products. The highest quality and most expensive are platbands made of solid wood. It is advisable to combine them only with solid doors made of exactly the same material.

According to the type of design, the following types of platbands are distinguished:

• straight lines - consisting of planks with a flat surface without unnecessary details;
• rounded - the profile of the outer side of the product has a convex shape or smoothly cut edges;
• curly - the profile line is more complex, the varieties of such architraves include carved products from an array of valuable wood species;
• typesetting can consist of parts of different shapes - a set.

One of the options for typesetting platbands can be considered products with a capital: a decorative element that repeats the shape of the upper parts of the columns. Such details will be appropriate only in the interiors of the classical style (Rococo, Victorian, Baroque, etc.). They will not fit modern minimalism or hi-tech at all, they will also look ridiculous in a loft-style studio.

Preparation for work

Before you install the door trim, you should prepare the walls around the opening. If they have defects larger than 5 mm, then the bar can move away from the plane, forming a noticeable gap. The curvature of the surfaces can also cause such an unexpected effect as the mismatch of the edges at the junction of the side and top trim.

To avoid unpleasant surprises when installing decorative elements around the door, it is recommended to align the wall, while making sure that both the side and upper sides of the opening are in the same plane. This can be done with a long straight plank, placing it across the opening and moving it from bottom to top. In some places under the tool, you will notice voids if the planes are not even enough. Mark the boundaries of each defect.

Alignment of the wall is made by finishing gypsum putty. The solution must be kneaded according to the manufacturer's instructions and applied to the surface, stretching with a long rule. Dry the wall for 24 hours and proceed with the installation of the front door trim.

When choosing in a store, you need to visually evaluate the flat surface of the planks. The part adjacent to the wall should not have any curvature. Particular attention should be paid to planks made of solid wood: if not dried properly, thin boards can lead with a “screw”, that is, bend along long side. Due to improper storage, door frames made of any material can bend. Such a part cannot be installed evenly and accurately.

In addition to the platbands themselves, you need to prepare the following:

• finishing nails;
• a hammer;
• side cutters;
• saw;
• drill and thin drill (1.5 mm);
• wax pencil;
• miter box or protractor;
• roulette.

In some cases, screws or special glue can be used instead of nails. If the architraves are made of solid wood, a longitudinal crack may appear when driving nails. To prevent such a defect, you need to use a drill, drilling narrow holes at the attachment points of the profile.

Mounting order

When installing door frames, you can use different ways of joining the planks: at a right angle and diagonally (at an angle of 45º). In the first case, it is enough to evenly cut the edges of the upper bar, measuring the desired length. An ordinary school protractor or a construction square will help to make an even right angle. In this way, you can arrange strips with a flat surface.

If the casing profile has a pronounced relief or rounded edges, the parts can only be connected diagonally. It's classic but more hard way. To get a beautiful diagonal joint, it is best to use a miter box - a template for the same angles.

If there is no such tool at hand, you will have to use the protractor again. Very carefully and accurately, you need to measure an angle of 45º at the end of the bar, draw a cut line with a pencil and saw off the excess. The sharp (upper) corner of the plank should be placed on the outer edge of the board, and closer to the door there should be an obtuse corner. By the same principle, draw another side profile.

When making a cut on a laminated or veneered plank for interior doors burrs inevitably appear, significantly reducing the quality of work. To cut such a product easily and without losing its appearance, you need to stick a strip of masking tape along the intended cut line. After that, the angles are measured, marked and cut. By removing the adhesive tape, the master will receive an even cut with very neat edges.

To correctly cut the element, you need to add 3 mm to the value of the height measurement taken. Set aside this length from the highest point of the acute angle and put a mark. The bottom end must be cut at a right angle. Be sure to take a separate measurement for each side part.

Finishing nails

After cutting the parts, the trim can be installed on the door: you need to attach the strips to the door frame. When using finish nails, drill a series of holes along the inside edge of the trim strip. The pitch of the holes is usually 5-7 cm.

Attach the plank to the door frame from the side of the canopies so that it closes the junction of the wall and the box. You need to drive in nails carefully, trying not to hit the casing with a hammer: on some surfaces, the tool may leave a noticeable mark. You should not drive fasteners to the very hat. The protruding parts of each carnation must be cut flush with side cutters. A wax pencil will help to completely mask the attachment points. In the same way, the bar is mounted on the other side.

Prepare and install the upper part according to the following scheme:

• mark and cut the corner at one end;
• try on the part, determining its horizontalness and coincidence with the cut of the sidewall;
• eliminate defects by making a new cut;
• measure the desired length of the profile along the upper border;
• as accurately as possible, outline and cut off the corner on the other side.

If the master has to deal with the installation of platbands for the first time, then errors can happen even with very neat work. Too noticeable gaps can be hidden with wax paste.

How to install a platband without nails?

If the door frame has smooth surface, then the installation of platbands for interior doors can be done with glue. There are special fixing compositions that bear the general name "liquid nails". They make the installation of any decorative elements simple and quite reliable.

To attach the strips, you need to apply a strip of glue on the back of the prepared part. Attach it to the door frame and press firmly. After maintaining the time specified in the instructions for liquid nails, leave the bar to dry for a complete setting (usually 24 hours). By the same principle, install the other sidewall and the top of the casing.

This method is convenient for MDF and plastic profiles that have smooth surfaces. But the choice of elements must be made with special care, since it will be difficult to glue curved parts.

Another option for fastening without nails is the installation of telescopic trim. it modern models, which are usually supplied complete with door leaf and frame. In this case, the additional element of the door frame has a special groove into which the protruding part of the casing can be driven.

The convenience of such fastening lies in the fact that no additional materials are required for fixing. The details fit very precisely, and home master it remains only to prepare the edges for docking. After that, the spike on the side of the plank is placed in the groove of the extension and the casing is pressed against the wall.

Whatever method of mounting the platband is chosen, the most important step is the fitting of the joined edges. If this operation was done well, then fixing the decor with nails or glue will not cause difficulties.

The installation of platbands on the door can be carried out in two fundamental ways. different ways- as professionals say, with undercutting at 45 ° or at 90 °. Regardless of the installation method, this work is quite complex and requires utmost attention. In this article from the website, we will analyze both of these installation methods - we will study not only the sequence of work, but also all the subtleties, as well as the nuances inherent in them.

Installing a platband on an interior door

Installation of trim on doors: installation with cutting corners at 45°

It is not difficult to guess that this method of installing door frames involves trimming the joints separate parts 45° set is the most common method and is equally suitable for architraves with any configuration. For those who do not know, I will say that the profile of door trims can be different: their front surface can be a flat plane, curved in an arc and even carved, which is typical for products of this type carved from natural wood.

The whole complexity of such a platband installation lies precisely in trimming these corners. If you have a miter saw in your home arsenal, then this is not a problem - it makes a clear and even cut. But if this tool is missing, then it will be difficult, especially when it comes to trimming colored laminated or veneered products of this type. The fact is that even with an electric jigsaw, not to mention a manual hacksaw, it is quite difficult to make an even, accurate and clean cut without chipping the front cover. That is why without special devices you can’t do it here, there are two of them - this is a miter box and a rotary hand saw.

Installation of platbands on the door

1. The miter box is a rather primitive and not very accurate instrument. This is a kind of template made in the form of a groove, on top of which there are slots. They determine the cutting angle. Over time, and it happens very quickly, cutting tool breaks the slots, and there can be no talk of any accuracy. Basically, it's a one-time tool.
2. Rotary hand saw. If you choose a hand tool for installing door frames, then it is better to opt for this option - it is more durable and also allows for more accurate and clean trimming. It is quite easy to work with them - you turn the saw at the right angle and manually, in the old fashioned way, by moving your hand back and forth, you make a cut.

There is a third way to install door trim with a trim at 45 ° - manual. Approaching this problem in this way, you will have to draw a line yourself and at the same time maintain the required angle, and then execute it using electric jigsaw or hand saw for metal, precise and neat cut. In any case, this undertaking will work only if your hands have sufficient skill. By the way, professionals have one trick that allows you to minimize the number of chips on decorative surface in the process of cutting the material - an adhesive tape is glued along the cut line, which plays the role of a kind of protection against chips.

You can see how the platbands are trimmed at 45 ° without all kinds of devices in the video below.

Installation of wooden architraves: installation with cutting corners at 90°

This way of solving the question of how to install platbands on is not suitable for all types of this product. If we are talking about moldings with a clear rectangular section or with slightly rounded edges, then you can’t imagine anything better than it. This installation method consists in the fact that the planks are connected at an angle of 90 ° relative to each other. In this case, the upper casing is, as it were, embedded between the two side ones. It is this moment that facilitates trimming and fitting joints.

But not everything is so simple here - without accurate measurements and even, clean, without chips, cuts are also indispensable here. Only platbands that have an even rectangular configuration, without any rounded edges, fit perfectly - in this case, you only have to clearly calculate the height of the side platbands and the length of the top rail up to millimeters.

How to install platbands on doors

Things are a little more complicated with platbands, which have rounded edges - in this case, a regular straight cut is indispensable. Thanks to the rounding, with a straight cut, the ends of the upper casing are visible. There is only one way to hide them - to perform an oblique cut. The slope should be directed from the front side of the rail to the wrong side - in general, the docking remains at 90 °.

If we are talking about the installation of do-it-yourself platbands, which have a completely rounded or carved configuration, then this installation method is not suitable - this type of product must be installed with a trim at 45 °.

How to install platbands correctly: installation technology

So, we have decided on the methods of trimming the corners of the platbands, now it remains to deal directly with the installation process itself from "A" to "Z". We will present it in the form of a small instruction.

Do-it-yourself installation of platbands

For novice craftsmen, who probably won’t be able to accurately calculate the dimensions of the upper casing on the first try, I’ll tell you a way to get rid of the gaps. If you have unsightly gaps at the docking points, then there is only one way to hide them. This gap must be distributed on both sides door block, and then cover with wax paste, designed to eliminate chips on furniture. It is sold in all markets and may have different color. Well, in the rest, the installation of platbands on the door should not cause any problems, the most important thing here is accuracy and accuracy.

Hi all! The aesthetic appearance of an interior door largely depends on how accurately and accurately the trims are mounted. And we will talk further about how to install platbands after installing the door block with the door.

In the process of installing platbands, we will need:

• Roulette, a simple pencil and a wax pencil to match the color of the casing;
• a hacksaw for wood and a miter box or a miter saw;
• masking tape, a clerical knife blade, a hammer and finishing nails;
• acrylic sealant in the color of the casing and foam sponge;

Preparatory stage

Installation of platbands on the door is the final stage of door installation. To this moment:

• the door frame must be fully assembled and checked for verticality;
• the door is hung and adjusted (easy to open and close);
• gap between door frame and filled with a wall mounting foam;
• a latch handle is installed on the door leaf and a striker on the jamb.

Note: the edge of the door frame and the surface of the wall must be in the same plane and form a flat surface. If necessary, align the wall with respect to the front side of the door block with plaster or putty.

With a sharp blade, carefully cut off the excess cured foam around the perimeter of the door block, taking care not to damage decorative coating boxes.

exist various options installation of platbands on interior doors: using self-tapping screws, liquid nails, snap-on platbands. I will talk about how to fix the trim with finishing nails.

Step-by-step instructions for installing platbands

The platbands are installed in the following sequence: side - top - side. If you first install both side elements, it will be problematic to fit the top one strictly in size. Attach the side trim to the installation site. The frame should be located with a slight indent from the edge of the box, in this case the casing does not interfere with the hinges, the lock tongue does not cling to it when closing and opening the door.

Inspect the bottom of the casing - if it has chips and bumps, cut off the edge. You can cut the platband with a hacksaw for wood, using a miter box for accuracy. But without the skill of such work, cut platbands with a convex or curly shape evenly. outer surface it will be hard. It is best to use a miter saw.

Install the casing vertically, check the size of the indentation from the edge of the box along the entire length. Make marks on the box with a pencil (in order to later mount the casing exactly in the same place), mark on the casing the place where the 45° cut will be made.

By using miter saw cut at an angle upper part clypeus, stepping back about 2 cm from the mark (reserve in case of an uneven cut). If the cut turned out to be even, attach the trim to the door frame and measure how much to cut from the bottom end so that the frame element fits correctly.

Then we fasten the casing with the help of finishing nails - they are distinguished by small caps that are recessed into the surface.

Carnations are driven in with an indent of a centimeter from the edge of the casing. Start fastening from the top, firmly pressing the casing in a vertical position. Drive in the first nail at a distance of about 2 cm from the upper oblique cut. Try to make the attachment points in one line, with the same pitch (30 - 40 cm). Finishing nails should be hammered very carefully so as not to hit the platband itself with a hammer. You can pre-drill the holes with a thin wood drill bit. Having fixed the casing with carnations, run your hand over it - the hats should not protrude above the surface and cling.

We put it back, tightly aligning the oblique cuts, and mark the place where the oblique cut will be made at the second end of the upper casing.

Having cut off the second end at an angle of 45 °, we fix the horizontal part of the door frame with the same finishing nails.

The second vertical element is mounted according to the same principle - washed down with a margin, checking the accuracy of the cut, trimming the lower end to size, fixing it with finishing nails.

note: trim strips may be slightly deformed from long storage, they can be led by a "propeller". For structural rigidity, drive in a stud from the top at the very edge on each side of the upper casing so that the connecting element passes vertically through the junction of the oblique cuts.

Small gaps remain at the joints, they are filled with sealant to match the color of the casing. To remove excess sealant with a sponge without leaving marks, stick strips of masking tape on both sides of the gap, close to it. Apply the sealant from the tube, wet and wring out the sponge immediately remove the excess. You can then remove the masking tape. The same operation is done with the second joint, according to the same principle, it is possible to mask the longitudinal joints of the frame and the door frame, as well as any other joints of the door frame elements. The caps of the finishing studs can be easily masked with a wax pencil in the color of the casing.

This completes the installation of the platbands. The final result depends on how carefully and accurately the work was done at each stage.

Video on the topic "Installing platbands for interior doors":

• The main types of platbands
• Training working area
• Use of nails
• Liquid Nails
• Telescopic models

How to fix the trim on the door - this question often becomes relevant when carrying out repairs in the house. Doing it yourself is actually quite simple, if you know some of the nuances regarding the types of products and methods for fixing them around the perimeter of the opening.

There are several ways to fasten door frames.

MAIN TYPES OF FRAMEWORK

Before we look at how you can attach trim to interior doors, you should familiarize yourself with their main types. The method of installation directly depends on the specific type of product.

According to the material of manufacture, they distinguish:

• wooden;
• from pressed paper;
• metal.

Varieties of door platbands depending on the material of manufacture

For budget options pressed products are used. AT modern interior MDF products are the most popular type, besides, unlike other types of platbands, any mounting option is available for MDF.

By appearance and configurations are:

• straight;
• rounded;
• carved and figured;
• typesetting.

Variations of platbands by configuration

Additionally, a capital can be installed above the upper casing. This element plays an excellent decorative role, especially when it comes to classical style and variations close to it.

With regard to mounting methods, platbands can be installed in three main methods:

• on ordinary nails;
• on glue "liquid nails";
• according to the "thorn-groove" principle.

In order for the opening to look organic, it is important to observe optimal dimensions for all details. Cutting elements can be done in two ways: at a right angle or 45 degrees. In the first case, the upper bar is most often installed above the sidewalls, while it must have an edge processed. With an oblique cut, you need to bring out the ideal angle so that the fragments fit together without gaps. For cutting it is better to use a miter box.

PREPARATION OF THE WORK AREA

Before proceeding directly to fastening the platbands, you should properly prepare the work surface. The entire list of works can be conditionally divided into several stages:

1. Box installation. The platbands serve as a kind of decor for doors, as they are able to create a spectacular frame and hide minor wall defects. Consequently, their installation must be carried out at the very end after the doors are installed.
2. Foam removal. After the box dries, it is necessary to cut off the excess mounting foam in order to bring an even level between the wall and the loot, it is best to do this with a clerical knife.
3. Removing irregularities. If, during the installation of the door leaf and the box, small defects appeared on the wall, for example, concrete chips, they can be repaired with plaster, this will not only facilitate installation, but also improve the strength of the opening. To ensure that no gaps remain during the installation process, the surface for attaching the platbands must be flat.
4. Wall decoration. Before installing platbands, you must complete all Finishing work: painting, wallpapering, etc.
5. Cleaning. Remove all dust and other debris from the surface; when using glue, you must additionally degrease the perimeter of the opening.

Preparation of the working area for the installation of the door trim

USING NAILS

The most traditional way to install architraves is to use nails. In order to hide the attachment points as much as possible, special miniature carnations are used, their peculiarity lies in the almost complete absence of a hat.

In order to properly nail the platbands on the door, you need to set them according to the level. Since when mounting on a wall, distortions or gaps may occur that were not on flat surface, it is recommended to leave a small excess of material when sawing.

Since nails without hats are used for platbands of interior doors, try not to damage the coating of the cladding itself. It is most convenient to work with a small hammer. You can pre-mark the connection point with an awl.

In order to cover the nails on the platbands, they mainly use a special mastic or grout to match the coating. Minor damage can be masked with paint, felt-tip pen or pencil.

Use of nails - traditional way architraves fastenings

LIQUID NAILS

Another method of fastening platbands involves the use of special glue. The most popular option is the so-called liquid nails. This compound provides fast traction on almost any surface.

Let's consider how to properly fix the platbands without ordinary nails.

To do this, you must initially determine the exact position of each element. After that, apply a small amount of glue to the back of the plank and press it against the wall. If glue comes out from under the casing, wipe it off immediately. It is advisable to apply only a few dots to prevent spreading.

You can fix the platbands either completely without nails, using glue, or by combining these two methods, this will provide greater structural strength.

Fastening platbands to liquid nails simplify the process

TELESCOPIC MODELS

The simplest is to attach telescopic architraves to interior doors. It is performed without nails, but can be supplemented with glue for greater strength. Mounting features are directly related to their design.

Installation of platbands on the door: two mounting methods

The fact is that the edges of the platbands, when connected, coincide with the edge of the extension or loot. The principle of adhesion is "thorn-groove".

Telescopic platbands are mounted strictly in the groove of the box plank

In other words, one part goes inside the other. Thus, in order to install such products, it is enough just to saw off the excess and dock the parts. The protrusion of the element is inserted into a recess in the door frame. Then you need to set required distance, which is regulated by the size of the recess.

Regardless of which installation method you choose for a particular situation, care should be taken, as one awkward movement can ruin the entire structure. If there are irregularities on the wall, it is necessary to first align them so that there are no gaps, this applies to absolutely all models of platbands, regardless of the material of manufacture and configuration.

Video: https://youtu.be/Hq2mNmacACs

Site search:

Installing platbands on the door frame is the final stage in the installation of the entire door structure. Cashings, first of all, serve as a decorating element that closes the interface between the entrance wall opening and the door frame. Ennoble and give a decent appearance will help correct selection the colors and textures of the element, which must be identical or as close as possible to the shade and material of the installed door.

Finishing decoration of the doorway should be done on final stage repair of the entire room - after whitewashing, painting and wallpapering the walls. This, at first glance, simple work, requires some attention and accuracy. The problem here is the exact fit and correct installation platbands on the door - without any gaps and distortions.

Types and classification of platbands

Large assortment of cash on the market building materials facilitates the choice, and its diversity allows some classification of architraves. They are subdivided:

• by material - wood, plastic, metal, composite;
• in shape - flat, rounded, curly;
• according to the method of installation - on overhead and telescopic.

Door platbands can also include such an element of decor as a capital. It is made mainly from solid wood and decorated with a sophisticated engraving pattern, which gives the whole room sophistication and aristocracy.

When installing platbands on interior doors, it is advisable to focus on the materials from which the door itself is made. If the door leaf is veneered or made of MDF, then there is no need to select material for cashing. In this case, platbands made of laminated MDF will be the most suitable.

It is impossible to give preference to any form - this is a matter of taste. However, it is worth remembering that classic flat planks for self-assembly will be more convenient in work and will help to avoid marriage.

Installation of overhead platbands on the door provides for their direct fastening to the door frame with glue or nails. Installation of telescopic architraves, due to their design features, can be produced without the use of any special elements. Such cashing does not give distortions and does not need additional fasteners.

Telescopic architraves

Their design difference is the presence of a special slotted ledge, made at a right angle and inserted into the longitudinal groove of the door frame. Such platbands make it visually monolithic, leaving the fasteners invisible. They are intended for arranging non-standard openings.

For walls that are too thick compared to the door frame, additional extensions may be required. By correcting with their help the difference between the thickness of the enclosing structure and the width of the box, you can achieve a perfectly neat appearance of the installed door.

Assembly and installation of platbands

To start, define inner dimensions vertical cashing in one of the following ways:

• using a tape measure, measure the distance from the floor to the junction of the upper transverse and side longitudinal beams of the door frame;
• make a risk on the clypeus attached in place.

The resulting mark will become the starting point for the future cut. Carefully, maintaining an angle of 45 degrees, the bar is cut in such a way that its size with outer side turned out to be more than from the inside.

The use of a carpenter's miter box will greatly simplify the work.

When determining the cutting lines on the platbands, it should be borne in mind that with different parties door leaf, their direction will be different. Do not forget that each plank will require an individual measurement. And yet - to begin the installation of cashing should be from the side of the hinges of the door opening "on itself".

Prepared side trims are not nailed close and only two nails - one closer to the floor, the other in the middle. A blank for the upper bar is slipped into the gap left on top and markings are drawn on it in place for the future gash. This will allow you to get rid of errors and the formation of large gaps during the subsequent pairing of all elements.

You can correct the location of the entire cashing by lightly tapping on the sidewalls of the planks, previously baited on nails. If the gaps are large enough, then one nail is removed from the plank, after which it is given the desired position. The final installation of the prepared platbands on the door is possible only after their careful adjustment in size with keeping right angles and minimum clearances of the connected parts.

Fastening

For cashing fasteners, it is best to use thin carnations, in which, after punching into the door frame, the cap is removed with wire cutters. A uniform step of about 15 centimeters will be quite sufficient for reliable fastening. If the adjacent walls of the doorway are even, then it will be enough to fix the platbands in the upper and lower parts with a pair of nails driven in the middle of the plank.

Copper or galvanized nails should be used, as they do not give dark smudges on wood over time, even in rooms with excessive humidity.

For fixing platbands from MDF, a slightly different technology is required. To work with them, you must pre-drill thin drill non-through holes to minimize the risk of damage to the plank when driving a nail. The same additional preparation must be made when using self-tapping screws as fasteners. But they will require holes that are somewhat larger in diameter in order to drown the caps, which are subsequently covered with plugs to match the trim, or sealed with acrylic putty before painting it.

The use of adhesives or liquid nails is used only for perfectly smooth walls adjacent to the door frame. Such fastening is not possible in rooms with high humidity, such as bathrooms and toilets.

Little tricks

When choosing wooden platbands, you should pay attention to the quality of the drying of the board.

How to install platbands on interior doors yourself

Poorly dried wood:

• has an uneven color;
• has blue spots on the surface;
• makes a hollow sound when tapped.

In order not to spoil the workpiece, the length of the cashing should be measured with a margin of at least 1 cm, which is useful when adjusting the corners of the parts to be joined. It is easier to cut off the excess from the opposite end of the bar.

Not worth marking on front side use a waterproof marker. It will be difficult to remove traced lines with a simple erase.

Trimming of platbands is best done with a miter saw. She will provide clean cut without chips. Gently correcting cut corners is easier than tape grinder. With its help, you can achieve perfect docking in the corners.

If gaps formed during the installation of platbands on the door, they can be made almost invisible by using a mixture based on beeswax, which is purchased at a building supermarket. Heated and brought to the state of a plastic mass, it perfectly fills the gaps formed.

Visually, the cashing looks better, towering 10 centimeters above the doorway, and the same platbands on all doors will provide a single style of the premises in the apartment.

06/15/2015 at 10:06 am

From which it follows that liquid nails glue can be used when working on almost any surface, but more on that later. Glue liquid nails are nothing more than just a dense adhesive mass placed in plastic tubes for convenience. But from where the ordinary construction adhesive got such a name, now we'll talk.

Initially, when it was first made, liquid nails glue was just an ordinary building universal glue for different surfaces! But since this construction adhesive was produced by a company with such a name as Liquid Nails, who knows English understood who did not, I will explain to him:

Liquid Nails is nothing more than liquid nails and our people, or maybe marketers, put glue, liquid nails, to the word.

Sticking platbands with adhesives

It is only necessary to ensure the complete fit of the platbands to the wall and door frame.

Any adhesive materials can withstand a certain load and, with a large weight of the platbands, will not be able to hold the platbands on the plane in a quality manner. When choosing one or another adhesive composition, specify the weight and properties of the platbands. You can stick platbands on liquid nails, or you can fix them on silicone or mounting foam.

Miter saw for trimming platbands

In order for the platbands to hold firmly, they must be properly adjusted and secured.

Installation of doors in Vladimir and the region

The plinth is more convenient and it is better to cut to already installed platband, since it is less likely to miscalculate in the calculations and make a mistake. If the wallpaper is glued before installation (or the walls are painted), then the trim will hide the edge of the wallpaper sheet behind it. If the wallpaper is pasted after installing the trim, then the adjoining of the wallpaper can be quite noticeable and not aesthetic. If a doorway much more sizes door block, then when wallpapering, you need to leave an allowance on the sides and top, otherwise the trim may not reach the edge of the wallpaper, as in this photo above.

There are two traditional options sawing the casing - at an angle of 90 ° and at an angle of 45 °.

The 90° angle is used on straight, even architraves without rounding at the request of the customer.

Useful articles and reviews on the repair topic

So it will be easier not to get confused and this is a guarantee that everything will turn out beautifully.

– As you know, the casing must “stand” on the floor, and in order to avoid a gap between the casing and the floor, the lower edge of the casing must be sawn off (trimmed) at an angle of 90 °, since the factory cut may not always be correct. Of course, it all depends on the specific manufacturer, the quality of the product, its quality level, but this preparation procedure should not be ignored.

- Attach 2 trims to each other reverse side to understand whether they are the same width, it happens that the strips differ in width by 0.5-1 mm.

How to insulate a window slope?

Finishing nails are convenient in that if the need arises, you can always dismantle the casing and then install it again. For work, take nails with a flattened hat, 40 mm long and 1.4 mm in diameter. To make the work go faster, pre-make holes in the platbands at a distance of 5-7.5 centimeters. After you drive in the nails with a side cutter, remove the hats, and mask these places with a special wax pencil that matches the color.

The second way is to fasten the platbands with liquid nails.

Installation of interior doors

This will avoid splitting and, accordingly, the formation of cracks on the visible part of the box.

Installation of interior doors. Stage 6. Installing the box. Insert the assembled box into the opening and fix it with wedges from above so that approximately the same distance remains on the right and left. Align the box with the wall on the hinge side. Check the vertical with a level. Fasten the box to the wall with screws at the top and bottom.

Installation and installation of skirting boards and platbands

In the store we find the right skirting board and measure its length. We take the figure we have and divide it by the length of the plinth, and the amount of plinth we need is ready.

Skirting boards can be made of wood or plastic, with or without a cable channel. Wooden plinth mainly goes to the laminate or parquet board, so that you should not press the plinth tightly against it. There are two mounting methods wooden skirting boards- using self-tapping screws and liquid nails.

Installation of platbands is the final stage in the installation of interior doors.

Installation of platbands on the door with liquid nails

1. Filing of stock platbands. Using a tape measure, measure the distance H from the floor to the lower edge of the groove in the upper bar of the box (Fig. 34); subtract the height of the plinth block from this size, you will get the size into which you need to cut the trim. File the stock trim at a 90° angle.

2. Connection of platbands with decorative elements. Insert the perforated plate into the groove on the back of the trim and decorative element.

Proper installation of interior doors

The parts of the box are connected using self-tapping screws.

The box is installed as follows:

Doors are installed on hinges pre-attached to the door and frame. You need to hang the canvas first, checking how smoothly the door closes, put the spacers a little lower to adjust door handle and above the top loop. After that, you need to check the door again - for example, it should not move independently in a half-closed position.

When the canvas is installed perfectly evenly, the joint between the door frame and the opening can be filled with mounting foam, after removing dust and wetting the surfaces.

Installation ()

Creating a flawless cut requires the use of a miter box. The joints formed during the installation process are recommended to be glued. The plinth will be removable if you put caps on the caps of the screws.

For more clarity, look below, it will illustrate all the above information and give you confidence in your abilities!

If you do not have the opportunity or desire to do the installation yourself, you can contact us, our masters will quickly and efficiently perform this work!

The cost of installing a plinth - from 190 rubles.

Installation of platbands on the door with liquid nails

Let's take a look at them in detail.

1. You decide to install the doors yourself in your room, apartment, country house? A commendable solution, the success of which directly depends on your locksmith and carpentry skills. If you think that installing an interior door is easy - feel free to fight! Perhaps saving a decent amount by wasting some amount of time.

How to install platbands on interior doors

The main thing is that the result of the work does not look like this.

Door installation

Thresholds at the box modern doors, as a rule, are absent, but at the request of the client it is included in the kit.

Note: The threshold is most often used in front doors to keep the heat in the house, but it is not advisable to use it in interior doors, as it will prevent air exchange between rooms.

If you order a door made of aged wood with a certain design, then along with it you should order hinges, linings, a lock mechanism (lock or latch with a latch) and handles that best match the style of the door.

What you need to know before installing a door

Door installation can be carried out only after laying the finishing floor covering and after finishing the walls in the rooms between which it will be installed, i.e.

Installation of platbands on the door with liquid nails

In this case, you do not have to deal with complex fasteners, drill a wall, floor or ceiling. Not only a specialist, but also any other person can work with glue.

As a rule, the packaging indicates what can be glued with this substance, how to apply it, and how long it dries. In construction, adhesives are used for parquet, linoleum, carpet, ceramic tiles, laminate, porcelain stoneware, ceiling panels, marble tiles, wood planks, etc.

http://remontavtosvoimirukami.ru

Cashing is selected for door leafs according to criteria such as texture, width, color. Cashiers are made from different kind materials, each with its own advantages and disadvantages. More details below.

Cashiers for interior doors are sold in a large assortment, and you can purchase products in a wide variety of shapes (carved, figured, teardrop-shaped, semicircular.) It is this detail that is finishing after which the installation is complete.

Often, door manufacturers do not include platbands in the product package, and they have to be purchased additionally.

For some, this can be a serious problem, but to avoid it, just check the package. Naturally, the cost of the door model with all necessary components there will be much more bare door leaf, but you don’t have to look for suitable item at other outlets. Platbands can be installed with your own hands, installation will not be difficult.

As for the dimensions of the door finish, the following are considered standard:

• Width - 7 cm;
• Thickness - 1.2 cm;
• Height 190 - 235 cm.

In order to finish the door, in which there is one leaf, you need 5 cashiers. If the door has two leaves, then 6. If you need to frame only the doorway, then it will be enough to purchase only 2 strips. What are the best options for cashing out? In this case, we are talking about the material.

You can buy platbands from the canvas:

• natural wood;
• aluminum;
• Become.

They can have a decorative coating in the form of a laminated film, veneer, facing plastic, paint composition. Modern manufacturers Planks are made in various sizes, and therefore it is possible to choose them according to your preference.

What are the criteria for choosing cash on the door

It is worth installing platbands only those that are carefully selected, match the color to door leaf, easy to fasten. The types of canvases are described above, but what other features of the choice of cashiers are there?

If a wooden architraves model is chosen, then it should be:

• Well dried, so that over time it does not start to crack, rot and lose its proper appearance;
• evenly colored;
• No blue spots
• Smooth without notches;
• No knots or cracks.

Cash is a product that is not too complicated in configuration, and you can make it yourself. Before you properly mount, you should carefully prepare the finishing element. It is worth noting that the competent selection of tools and materials allows you to start everything. necessary work. First, the workpiece is cut according to the dimensions taken in advance. The calculation is done individually and you should not rely on standard parameters.

The quality of the work performed directly depends on how carefully each canvas will be processed by means of a typewriter or woodworking machine.

After the platband is made, it is polished. Namely, there should be rough grinding and manual processing. The second step is required to remove all the circular scratches that remain on the electric machine. Finished platbands must be covered with a primer and antiseptic composition.

How to make door frames

Installing the cashier is not difficult, but first you need to prepare the element. You can find an unlimited variety various architraves from many manufacturers, which may differ in price, finish, shape.

However, many people prefer to install those products that will be made by themselves.

Thus, it is possible to significantly reduce the cost of repair and finishing work and, moreover, it is much easier to mount the finish according to your preferences on your own.

It is definitely worth preparing a number of tools, without which it will be impossible to make, cut or completely cut and attach the cashier to the door:

• Saw, preferably manual.
• A machine that can make a right angle.
• Thickness gauge, which is required to create the correct thickness of the casing.
• Vertical cutter.
• Sander.
• Square.
• Ruler.
• Pencil.

There are a variety of ways to fasten platbands. For example, you can cut it to size and nail it on nails, attach it with glue, stick it on liquid nails or mastic even to a corner, put capitals on self-tapping screws. Each of the presented options has its own advantages and disadvantages, which are worth familiarizing yourself with.

Proper installation of platbands for interior doors

Nailing the trim on the finishing nails is the most popular option. It has a lot of advantages. If necessary, you can easily remove the platbands. Mounting is quick and easy. To put the finish for the openings, you will need to pick up carnations, on which there is a flat and narrow hat.

The length is chosen, depending on the thickness of the casing, but on average 4 cm is chosen.

If only nails with hats were on sale at the time of purchase, then the hats can be removed with a couple of light movements if you use a side cutter. Before doing the installation of platbands, it is worthwhile to outline the location of the fasteners. A balance must be observed, or, in other words, the arrangement is carried out evenly so that there is no distortion of the structure. Experts recommend installing them at a distance of 50 cm from each other.

Liquid nails are glue sold in tubes. It is very easy to apply and can be used for any kind of architraves. It can be plastic or wooden model. Don't need any preparatory work, because it is enough just to squeeze out the composition, and press the trim to the right place on the opening between the wall and door panels. The advantages of this installation method are quite obvious, and most importantly, liquid nails dry as quickly as possible, they are as strong as possible, and even when the composition flows out of the product, it is very easy to remove it.

Self-tapping screws are a simple and old method of installation. It has such advantages as:

• Reliability;
• Strength;
• Ease of installation.

The downside is that with too much impact on the canvas at the time of screwing in the screws, the canvas may crack. The place for the installation of the self-tapping screw must be marked in advance so as not to move even a couple of millimeters. This can also cause a violation of the integrity of the clypeus. Best of all, experts advise pre-drilling holes to avoid the above consequences.

There is also such a method of fastening as beaks. The advantages are an excellent proper appearance, ease of installation. The disadvantage is that they are made of MDF, and it is not only undesirable to remove them after installation, but after all, after dismantling, you can notice chips and cracks on the coating.

We select telescopic trim on the door

There are telescopic architraves on a door. They differ from the usual ones by the presence of a special ledge for easy connection with extensions and the door frame. They are used when the door frame is narrower than the thickness of the wall. Due to this special protrusion, the fastening is carried out through the longitudinal grooves in the door frame. If the installation is carried out correctly, then neither fasteners nor walls will be visible in the opening between the box and the wall.

This method of installing platbands is also:

• Reliable;
• Lasting;
• Durable.

When making platbands on your own, you will need to make the most careful calculations so that the door has a neat and complete look. There are a number of nuances that you should definitely take into account when installing platbands. To hide fasteners in the form of nails or self-tapping screws, you can use a wax corrector or acrylic sealant of the same color as the door leaf.

In order to avoid a gap at the junction of the platbands, each cut of the subsequent canvas must be created, relying on the previous element. If there is a curved wall in the room, then straight platbands will not work. What to do in such a situation? Finishing nails should be used to mount the edges of the trim. Such fasteners are invisible and they allow you to align the finish of the door frame.

If there are minor gaps, then acrylic sealant or, again, wax sealant will be required to mask them. To mask significant defects around the door frame, you can choose wide platbands of the order of 10-12 cm. It is best, in this case, to purchase platbands at custom order. Since the installation of platbands is a finishing touch, the procedure is carried out only at the end of the repair of the room.

Installation is carried out flush at the ends, and visually, it seems that the installation is carried out directly to the wall. Experts recommend choosing thin carnations with a small hat.

Do-it-yourself installation of trim for interior doors (video)

A door without platbands not only looks untidy, but it spoils the whole look of the room. They allow you to hide the edges of the wallpaper, the opening between the door frame and the wall, as well as bring completeness and aesthetics to the interior design.

Cash out is decorative element, which is attached outside and gives a finished look to the whole house. Its main purpose is to hide gaps and flaws after installing windows and the front door. In addition, it improves sound insulation and reduces heat loss.

How to make the right choice

When choosing cashing on doors and windows, you need to remember that this element immediately catches your eye, so it must be in harmony with the whole structure. When choosing or making platbands with your own hands, you need to remember a few important points:

• Platbands should be in harmony in color with the walls of the house.
• The quality of the material must be high level to endure weather: rain, wind, sun, temperature changes. Wooden platbands need to be covered with high-quality varnishes and paints so that they do not fade and do not lose their attractive appearance.
• The balance of dimensions will achieve a harmonious appearance. Too wide platbands will be inappropriate for narrow windows, and vice versa, narrow ones will be lost against the background of wide openings.
• Internal cashing for interior openings and doors are most often flat or rounded. Outside, it will look good if you make it carved.

Cashing a wooden house is best done from wood. So the building will look harmonious and beautiful. When building from modern materials plastic and metal finishes are appropriate.

Wooden architraves

Wooden platbands are often chosen for installation on the front door from the outside. They are reliable, durable, easy to make with your own hands. But it must be remembered that wooden architraves require constant care, painting and varnishing in order to maintain their appearance at the highest level.

Carved wooden trim for windows and front doors is made on sophisticated machines. Its price is much higher than usual, but the beauty and sophistication is worth it. You can try to make a carving with your own hands using chisels, but this work is not easy and requires skill and patience.

Deciding to make carved architraves yourself, you need to consider the following tips:

• the cashing pattern must be made in the same style;
• thread processing can be done not only with varnish, but also painted in different colors;
• the upper horizontal bar can be made in the form of a "kokoshnik";
• vertical slats can be longer than the opening and represent a "towel" with drains for rainwater.

Plastic finish

Advantages of plastic platbands:

• affordable price;
• big choice color solutions and invoices;
• reliability and durability;
• ease of maintenance.

Plastic strip for cashing out different widths. It can be attached in two ways:

• on mounting elements - a fixed structure;
• on special latches - removable design.

Mounting on special latches or nipples is very simple and convenient. platband on inside has cavities into which they are inserted. These latches are screwed around the perimeter of the frame with ordinary self-tapping screws. The cashing bar is applied to the attachment point and, using a small force, the nipple is inserted into the groove.

Depending on the width of the casing, there may be two, three or four grooves. They can also be used for laying TV cable.

Production of wooden architraves

In order to make platbands for entrance or interior doors with your own hands, you first need to choose a material of suitable quality and prepare a tool for work.

The cashing for the door must be made of a dry board so that it does not lead after fastening. You need to carefully consider the appearance of the material. If the board will be covered only with varnish, then the color of the wood should be even, without spots, which indicate a violation of the drying technology. They can only be removed by painting. The board should be free of knots, they increase the likelihood of breaks and cracks when working with your own hands.

The manufacturing process consists of the following steps:

1. The dimensions of the opening of windows or doors are determined, the values ​​\u200b\u200bare transferred to the board.
2. Blanks are cut for cashing.
3. Rough polishing is carried out, and then manually with a fine sandpaper the surface of the cashing from the outside is brought to an ideal state.
4. The platband is treated with a protective compound.

You can use platbands from old door if they are the right size. To do this, they need to be cleaned of the old coating, cleaned, sanded and coated with paint or varnish.

DIY installation

Installation of cashing is not a complicated process, so you can do it yourself. To do this, follow the following instructions:

The house should be beautiful not only inside, but also outside. Thoughtful cashing of windows and front door will help make it attractive and distinguish it from other buildings.