How beautiful to paint an old door. Decorating old doors with your own hands. How to make a new one from an old door with your own hands: options, photos, tips

Do not rush to dismantle the boring old interior doors and change them to new ones. Consider upgrading them as there are many ways to decorate and restore them. old furniture applicable to door leafs.

Decorating doors from fiberboard

Process step by step:

1. If the door is completely slanted, it must first be removed from the hinges and the old fittings removed. New handles, locks, latches in the same style on all interior doors will be the first step towards updating them.
2. So the door was removed. Now you need to remove the old paint. Use a building hair dryer and spatula.
3. After that, cracks and scratches are sealed with special putties and putty.
4. Wait for the surface to dry and sand it.
5. Cover the canvas with drying oil, which will prevent its deformation under the influence of moisture.

For a visual performance, see the video:

The door is ready for the actual decoration. The easiest way is to cover the door leaf with colored paint or varnish it. Next - room for imagination:

• make a drawing using a stencil;
• paint the moldings in a different color;
• stick moldings if they were not there or imitate with paint.

A variety of applications - fabric, paper, vinyl, leather, photo wallpaper - will turn an old door into a new one - original, stylish and unusual.

Decorate an old bathroom door

Before you start decorating the door to the bathroom, you need to consider important point. Since the room is constantly present high humidity, the coating that you apply to the door, or rather, to inside, should be resistant to this factor.

How to prepare the door leaf is described in the previous section of the article. In short: you need to remove the old layer of paint from the door, sand, putty and prime the surface. If there are no slats, they can be bought and attached to the door. Having painted after that everything in one color, you will get a whole picture.

An excellent option for a bathroom door is to install a full-length mirror in a frame of slats. If it is flexible, plastic - the installation process will be quite simple, but the effect will exceed expectations: and beautiful, and practical, and useful.

The mirror can be replaced with a mosaic, a special vinyl sticker, and even a piece of wallpaper (only washable and moisture resistant). By experimenting with materials and colors, you can make an old bathroom door stylish and special.

How to decorate old glass doors

The first option that comes to mind when thinking about decorating options old door with glass, these are stained-glass windows. What is needed for this:

• stained glass paints water based;
• black paint - for the contour;
• thumbnail image.

Transfer the drawing to the glass, circle the outlines with a thin black line, and after drying, proceed to decorate the elements with different colors.

You can make the work even easier by simply buying a special film that imitates a stained glass picture.

One of the door decor options with glass in the video:

Stained-glass windows allow you to make even an old door unusual and stylish.

If the old glass in the door was transparent, it can be made frosted. For this you need to purchase liquid glass(1 liter will be enough, its price does not exceed the cost of a chocolate bar or a cup of cappuccino), which will need to be mixed with crushed chalk (or tooth powder). The resulting paste is applied to the fat-free, flat surface in 2 layers.

More easy way- sticker of a special film or purchase of a ready-made matting paste.

Choose your option for decorating old doors, and you will see how easy it is to update the atmosphere in the apartment with your own hands and at no extra cost.

The doors are getting old and their appearance becomes unsatisfactory over time. In most cases, they are changed, repaired, but few resort to decoration - effective way make a new one out of an old door.

Let's get started - start with surface preparation

Any door decor begins with surface preparation; as a rule, old painted doors are decorated with their own hands, on which there are many defects in painting and material. For convenience, the door is removed and laid horizontally. Warm up the layer old paint building hair dryer and remove with a spatula. If you don't have a hair dryer, you can use chemicals to remove old paint.

Next, wood putty is applied, apply it thin layer covering all cracks, depressions, chips. We proceed to grinding the door leaf, for which you will need coarse and fine-grained sandpaper. Hand sanding is time consuming and requires considerable effort. The grinder will help out, the work with which will go much faster. After rough sanding, fill the cavities with putty and repeat sanding.

If you plan to paint the door, you should achieve a perfectly flat surface, otherwise the paint will only emphasize all the defects. For other decor methods, a flat surface is required, but not necessarily ideal.

Then we remove the dust, wash the door leaf, applying detergent for dishes, diluted with water. Further actions depend on the method chosen for updating. If you plan to use fabric or wallpaper, prime the surface using a special primer or glue diluted to liquid state. When the primer dries, we proceed to the next stage of work - we apply paint or use another type of decor on the doors.

Decorating with paints - pictures using stencils

A plainly painted door is not very presentable. You can give it a look that is in harmony with common interior by doing decorative coloring. For plain base layer drawings are applied using stencils. It is important that the background comes out evenly colored, without gaps and sagging. Let the paint dry. Only after the base layer has completely dried, we proceed to apply the second. Using a stencil, apply a second coat of paint of a different color.

You can create a drawing yourself, but it’s better to buy a stencil with an ornament or in pictures at a construction hypermarket. The choice should be stopped on a pattern or ornament that will be in harmony with common style rooms. We apply paints with a roller or sponge, each subsequent layer after the previous one has completely dried, then they will not mix. The same technique can be used on a door with a large glass insert.

The classic way - wallpapering

To decorate the door, you can use the most different wallpapers: ordinary paper, vinyl, non-woven. The market offers material of various shades and patterns plus high-quality glue. It can be a canvas, or you can decorate individual places with them. If you plan to paste over the entire surface, first remove the fittings. In any case, follow some rules.

We apply glue only to the wallpaper, although some people think that covering both surfaces with glue can provide a stronger connection. In fact, there will be a lot of excess glue that will have to be removed, as this can ruin the wallpaper. To smooth the surface and remove bubbles, we do not use hard objects, we take a special spatula, roller, sponge, rag, finally, so as not to damage the paper. From the glued wallpaper, cut off the excess with a clerical knife.

It is very nice to paste over the door in the apartment with photo wallpapers, but not standard purchased ones, but made to order. We select any drawing and transfer it to a USB flash drive, then we turn to an agency that deals with photo printing. We indicate the dimensions and print photo wallpapers, including volumetric ones. Additionally, we decorate the door pasted over with wallpaper with moldings, which are foam skirting boards or a self-adhesive cord.

Liquid wallpaper - create an exclusive decoration

Liquid wallpaper - versatile material not only for walls, but also for decorating doors, decorating and decorating them, creating unimaginable patterns and compositions. They are afraid of moisture, so this method is not used for decorating in the kitchen or in the bathroom. Be sure to carefully prepare the surface - we process it with an alkyd primer and oil putty. We take white color so that the base does not show much through the wallpaper layer.

Add a little to the dry mixture warm water, mix with your hands (it is completely safe for health). After 15 minutes, mix the wallpaper again, add color and mix again until a mixture with a uniform color is formed. 1 cap per 5 liters of wallpaper will add a mixture pastel shade. The intensity of the color depends on the amount of color. If you want to create a multi-color pattern, we are preparing wallpaper different colors in different dishes.

Let the wallpaper mix stand for 12 hours. We take a little wallpaper on a spatula, apply it to the door leaf, gently stretch and smooth it until a thin layer of the same thickness is formed. After a maximum of 3 days, the composition will dry out. We cover it with a transparent varnish, which will prevent rapid abrasion. If something did not work out, there is an opportunity to correct the unsatisfactory work, decorate the door in a new way. We wash off the wallpaper layer with warm water and repeat the process.

Fabric decoration - attractive and unusual

The door in the room decorated with fabric looks very attractive and unusual. We pay special attention to the fabric - it is important to find out the degree of its shrinkage. We cut off a small rectangular piece, measure its length and width, soak well with water and dry. We measure the dried piece again and compare the indicators before and after wetting. If the difference is large, then wet and dry the cut before using the fabric for decoration.

Masters use in their work not only a single piece, but also individual fragments that have different colors and textures. This method is called "patchwork", it is often used by designers to design not only doors, but also entire rooms. The technique is much more complicated than gluing with a single cut, because the pieces can have varying degrees shrinkage. Glue is better to use casein or CMC, mastics are suitable Humilax, Bustilat.

We process the surface of the fabric with an adhesive, apply it to the door leaf, smooth it with a spatula. Using different pieces in your work, it is important to monitor the joints between them so that they are neat, otherwise the door will look ugly and untidy. Additionally, but not necessarily, we decorate our masterpiece with foam frames, furniture studs, various cords - leather or shiny nylon.

Restoring a wooden door - vintage style

An old wood surface has a luxurious look if it is brought into proper condition. This design element belongs to the now very popular vintage style, which is applied on any surface. Decoupage of doors revives an old product, breathes into it new life. The picture is combined with wooden elements, and a stylish harmonious design comes out.

Here is an example of how to restore front door made of natural massive wood in vintage style using decoupage technique and decorative elements. We carry out work on the door, removed from the hinges, carefully puttied, with a perfectly flat surface:

1. 1. We paint the horizontally laid door with acrylic paint in white. Apply it with a wide brush in a thin layer in one direction.
2. 2. Let the paint dry completely. We start grinding with coarse sandpaper, as a result of which we achieve the effect of "old times".
3. 3. We tear old newspapers and other paper into pieces with our hands. We select and outline the field for decoupage and grease it with PVA glue. Immediately, in no particular order, we glue the paper, apply two layers of transparent varnish.
4. 4. For final finishing we enclose a plot with decorative elements around the perimeter with a black baguette. Additionally, we decorate with a lace bow, a wreath of artificial flowers, beads.

Decoupage of doors can also be done with special paper, a printed pattern or a beautiful paper napkin.

Designer decor - turn a thing into an art object

This is the only way where there is no need for careful preparation surface, because all the defects will hide a peculiar design. We begin to decorate the door with the purchase of an egg tray, which will serve as material for papier-mâché. Spray the tray with water and knead with a fist with the intention of leveling the surface. If the material is torn, this is normal, because small pieces are needed.

We glue absolutely randomly almost flat pieces on the canvas of the door to be decorated, using hot glue or liquid nails. Then all sorts of unnecessary things come into play, preferably unusual ones, original form, but it is possible to use all the usual things. We use everything that catches our eye: lids of cans and bottles, key chains, rings, chains, elements children's constructor etc. We paint the finished surface from a spray can with high-quality acrylic silver paint.

Decorating entrance and interior doors with your own hands is an interesting activity that will change the design of your room!

DIY door decor is great way bring variety and a note of creativity to the interior or exterior of your home. This is especially true on the eve of the holidays. In addition, small defects may appear at the door over time, which, again, decoration will help to eliminate. How to decorate your door so that it looks stylish and beautiful, read in this article.

DIY Christmas wreath: making the base

Perhaps the most traditional and in a simple way To decorate the door in a New Year's way is a spruce wreath. Of course you can buy ready-made stencils wreath. But it is much more interesting to make a wreath with your own hands.

So, in order to make a traditional New Year's wreath, you will need the following materials:

• fir branches;
• wire (it can be replaced with newspaper, paper, embroidery hoops);
• small Christmas decorations;
• New Year's tinsel;
• beads;
• bunches of rowan;
• medium-sized tangerines, sweets;
• ribbons.

The most important thing in the manufacture of any wreath is the creation of a solid base-frame. Of course, you can buy ready-made stencils. But, if you did not find them in the store, then there is nothing complicated in making the base. As a material, you can take a wire and, winding it several times in the shape of a circle, get a base. Other interesting stencils for a wreath - an embroidery hoop, newsprint, paper towels. An unusual, but troublesome option is to fasten the bushings from toilet paper(see photo).

Do-it-yourself New Year's wreath: let's start decorating

The next step is the most interesting. This is the decoration of our base. Most traditional way- attach spruce branches to it. If you used wire, then you can easily do this with it. If you used paper as the basis, then the branches can be attached with staples, threads, or the same metal wire. Once again, we glue the protruding spruce edges with glue. It is necessary that the entire base be covered with branches. Let's dry. And let's start decorating. And you will get a New Year's wreath, as in the photo. It can also be used on sliding door wardrobe.

Door Decorations for Valentine's Day

On this day, you can make a special decoration for front door. For this, hearts of different sizes, cut out of cardboard or fabric, and hung in the form Garlands on the doorway (as in the photo).

A great idea could be a small embroidered by you personally decorative pillow in the shape of a heart with a declaration of love. It can be hung on a carnation on the front door. It will be not only a decoration, but also a gift to a loved one. Can be used as a temporary decoration Balloons in the shape of a heart that can be tied on sliding doors.

Decorations on the door for March 8

You can surprise your loved one on this day not only with a chic bouquet of fresh flowers. Original gift can be placed directly on the door. This will become at the same time great decoration. If around metal wire attach live tulips your hand does not rise, then you can use artificial flowers. Such an element of decor can be used not only for the door, but also for sliding doors closet.

Doorway Decor

Do not disregard not only the door itself, but also the space around the doorway. Good christmas decor can be done by attaching colored ribbons around it. And at the top of the doorway place such a festive element as a bow. On February 14, you can make an impromptu curtain of hearts, stringing them on long strings. And on March 8, the top of the doorway can be wrapped with a wreath of artificial flowers.

Door decor in case of damage

However, the need to decorate a door is not always associated with such pleasant chores as decoration for the new year. Sometimes such decor is caused by necessity. After all, the doors are short-lived and may eventually lose their original appearance.

If this option does not suit you, then mirrors can be used as decor. So, you can use acrylic panels with amalgam. And in this case, special attention should be paid to the preparation of the door. You can also use figured acrylic mirrors in the form of animals, flowers and other shapes. Such decoration will also look good on sliding doors. In a similar style, you can decorate the doorway. In addition, you can also decorate the cabinet doors.

As you know, doors are not eternal, and anything can happen. For example, often scratches, chips, cracks appear on the door leaf. In this case, you can repair, replace or decorate carefully, hiding all defects.

To decorate the door, you can use not only paper, vinyl and non-woven wallpaper, but also fabric or liquid.

In this case, the canvas should be prepared by removing a layer of paint in advance, filling irregularities, cracks and sanding the surface. The applied primer layer will provide additional adhesion of the wallpaper to the door surface.

Wallpaper can be pasted over as completely the entire canvas, as well as panels, cutting out pieces of wallpaper right size. Don't forget to choose the glue that suits the type of wallpaper and dilute it according to the instructions.

Wallpaper classic

Lubricate the cut wallpaper with glue and apply it to the door, making sure that there are no jams and distortions. Smoothing the wallpaper soft cloth, roller or wide plastic spatula. Carefully cut off the excess with a clerical knife. Additionally, you can decorate by gluing a foam plinth frame over the wallpaper.

For the period of drying of the wallpaper, it is advisable to close the windows in the house and exclude the appearance of drafts, a sharp temperature drop.

Textile

The door decorated with fabric looks very unusual and attractive. In addition to the standard surface preparation, attention should be paid to the fabric itself, ascertaining the degree of shrinkage.

We cut off a small piece of fabric, measure its dimensions, moisten it with water and dry it. After drying, we again take measurements, comparing the readings and finding out the degree of shrinkage. If the value is large, then we also wet the entire piece of fabric before decorating and leave it to dry.

Note! You can use not only a single piece of fabric, but also cut fragments different color and invoices. This technique is called "patchwork" and is often used by designers in the design of premises.

For fabric, casein glue, a composition based on CMC, as well as Bustilat or Gumilaks mastics are best suited. We apply the adhesive to the fabric and apply it to the door, smoothing it with a spatula. When pasting the door with fragments, it is important to monitor their geometry, otherwise the work will look sloppy.

Additionally, you can decorate the door with beautiful furniture carnations, shiny nylon or leather cords, fabric paint, baguette frames.

- are universal. They cover not only walls, but also doors, creating unimaginable patterns and compositions. In this case, you do not have to mess with cutting canvases. However, it will not be possible to expose the door to moisture. Therefore, for decorating a door in a bathroom or kitchen, this method is unacceptable.

To work, you need a dry wallpaper mixture, a few spatulas different sizes, hopper gun, roller, clear lacquer, color.

Decorate the door with a mirror

Highly unusual finish doors can be crafted using mirrors. Such decor will not only attract everyone's attention, but also visually expand the space of the room, add light. However, cutting and attaching a classic glass mirror is very inconvenient, since there is an alternative - acrylic panels with amalgam, which has excellent reflectivity.

Acrylic mirrors are available in a wide range color scheme. You can choose any shade you like or several to make mirror panel. Plastic panels do not break, are easily processed and attached to the door, and are light in weight. The cost of mirrored plexiglass is not the lowest, but the quality and aesthetic qualities are fully consistent with the declared prices.

Before attaching the mirror plastic to, you should carefully level the surface by deepening the nail heads, sanding and covering all the bumps / recesses with putty.

at the door and reverse side acrylic canvas in without fail primer is applied deep penetration. After it dries, the cut panels are fixed double sided tape and mounting adhesive. For convenience, use mounting suction cups, with their help it is much easier to carefully glue the panels to the door leaf.

As one of the decoration options, you can consider figured acrylic mirrors. Such a mirror can be attached in the center of the door or you can purchase several elements and arrange them beautifully. Usually small parts are produced with an adhesive layer already applied.

Even from this simple material, as buckwheat husk, excellent work is obtained. The cost of the material is minimal, but the service life of such a coating, unfortunately, cannot be called too long.

Step 1. Remove a layer of old paint from the door, available vinyl flooring, eliminate all irregularities with putty.

Step 2. Remove the door from the hinges and put it on the floor / stools / table. We paint the door leaf with dark brown paint. If there are glass inserts on the door, we protect them with masking tape.

Step 3. We thickly grease the dried door with PVA glue, lay out the husk, distributing it with our hands. If necessary, add small gold sparkles.

Step 4. We cover the door with a transparent varnish (glossy or matte). It is advisable to apply three layers in order to qualitatively fix the buckwheat on the door leaf.

A beautiful door is ready. To prevent the door from knocking out general design room, decorate the picture frame in the same way and place the creation on one of the walls.

We decorate the door in vintage style

Vintage is sophistication and sophistication, the beauty of artificially aged things, in harmony with the chic of individual decorative elements. The door in vintage style will become a work of art, an exclusive element of the interior.

For decoration you will need:

We will combine door painting with decoupage technique and in addition we will add decorative elements. We will carry out the work on a door that has already been removed from its hinges, puttied and carefully sanded, laid horizontally.

Step 1. Paint the door white. We apply the paint with a wide brush with stiff bristles in one direction, in a thin layer.

Step 2. When the paint dries, gently sand it with coarse sandpaper, achieving the effect of "old times".

Step 3. We start decorating the panels or the central part of the door. We tear musical notebooks and old newspapers into small pieces with our hands. We draw a field for rectangular or rectangular activity on the door with a pencil. square shape. Lubricate the outlined areas with PVA glue. Immediately lay out the paper randomly, smoothing it with your hands. On top, apply a transparent varnish in two layers.

Step 4. Along the perimeter of the areas pasted over with paper, we fasten a black baguette to the mounting glue.

Additionally, you can decorate beautiful wreath, a large lace bow or plastic beads imitating pearls (glue-based).

There are many other ways to decorate doors. Operate with the materials available in your home arsenal, connect your imagination and create your own masterpieces.

Video - A variety of ideas for decorating doors

Video - Applying patina to the door

Video - Self-decorating the door

Sections of the article:

Over time, old doors become less attractive and require updating. Not every person can afford to replace old doors with new ones, especially if such a step cannot be justified by an urgent need. In most cases, only repainting or decorating the door is required, after which a new life can begin at the door.

Door preparation

Even a cracked door leaf can be updated. Do-it-yourself door decor will allow you to minimum investment finances and the use of often only improvised means beyond recognition. However, before making decoration wooden door, it must be thoroughly prepared.

Work sequence

The first step is to remove the old coating. This is a must to ensure that the new coating is as strong as possible and that many of the microbes that have been absorbed by the old paint are removed. After you have removed the door leaf from the hinges, you need to put the door on a flat surface and remove the hardware. If there are glass inserts, they must be removed for the time of decoration. Sandpaper or a suitable solvent can be used to remove old paint. To work with the solvent, you will need gloves and a respirator. A building hair dryer can also be used.

Once the paint is removed, the condition of the canvas needs to be assessed. In the presence of cracks and chips, you need to fill them with putty on wood. To ensure an even smooth surface you need to process it manually with sandpaper or grinder. Wood must not be wet! It is necessary to wipe the surface of the door with a slightly damp cloth and treat with an antiseptic.

In order to save natural texture wood, it is necessary to varnish in several layers. If you cover the canvas with stain, the tone will turn out a little darker. Thus, it is possible to turn a pine into a cherry (a kind of imitation of noble species), while natural beauty and the naturalness of the material is preserved. In the event that the door will not be repainted, as soon as the antiseptic dries, the surface will need to be covered with two layers of primer.

Selection of decor options

There are a lot of ways to decorate and update the door. Even without any artistic skills, you can translate some of your ideas into reality.

The easiest way to decorate an old door is to repaint the door. new paint. On the modern market building materials in addition to the usual enamel, there is big choice various colors.

The most optimal option for the time being, how you can decorate an old door yourself - application acrylic paints. When using them, you will definitely be convinced of the convenience of working with them, the absence of smell, wide color palette. For painting doors, you can use not one color, but several - the main thing is to combine them correctly so that the result is only pleasing.

Alternatively, you can use latex paint that is resistant to water to decorate the door. This option is more suitable for doors to the bathroom and nursery. Latex paint is odorless, the drying speed is very fast, as a result, the whole job can be done in about an hour. By painting the door to the children's room, you can attract the children themselves and come up with a unique design with them.

Application of stencils

Even if you are not a professional artist, to create a beautiful interior door You can use a variety of stencils. Using them is quite simple: you just need to attach a stencil to the door and apply paint. As soon as the paint dries, the stencil should be carefully peeled off the door leaf.

And if you have the skills of a painter and an artist, you can get an incredibly attractive drawing. If the resulting pattern does not suit you with something, you can always fix it - repaint it again.

If you want to get the effect of a tree or an antique, you can use some improvised means: a sponge to create spots on the surface, steel wool to get an imitation of an antique surface, a hard brush - a jeans effect. Also available for sale special paints, with which denim is imitated.

Film use

An equally simple way to decorate doors with your own hands is to use vinyl film. However, this method is applicable only to canvases that are in good condition. It will help to complement the interior of the room. bright colors. It is enough just to choose the desired option and transfer the self-adhesive. Despite the minimum time spent, the result will please for a long time.

Ready-made stickers are commercially available in many construction stores. In the event that you want to make a certain pattern from films, you can purchase a self-adhesive PVC film, having made it in advance cardboard template. Now you need to transfer the outlines of the template to the film, cut out the elements for decoration and stick them on the door.

The use of moldings

Get original decorative trim moldings will help. Using them, you can create an imitation of stucco - great option, combined with classic interior, antiquity. Moldings - special elements made of polyurethane or foam. Fixing on the doors is carried out with glue, which is liquid nails. With the help of moldings, any composition of the door decor is possible, but it is necessary to take into account the limitations of its shape. For sliding doors, this decor option is not suitable.

Mosaic decor

Do-it-yourself door decor using mosaics is quite rare and unusual. Ceramics, due to its severity, is not suitable for every door, so the use of mosaics is resorted to much more often.

To decorate the door, it is better to insert a mosaic in fragments. This method will provide original and bright view. Similar finish will not lead to a significant increase in the weight and thickness of the web. If the products are made of glass, it is necessary to purchase special tile adhesive white color. Better yet, use transparent resin or liquid glass.

Stained-glass windows for decorating doors

Decorating doors with glass inserts is a great option for decoration. Best Option- decorate the canvas with your own hands, shops offer ready-made glasses covered with film, metal inserts or glass with a pattern. Currently, the most popular method of painting glass with the use of acrylic paints, as well as independent creation stained glass.

If choose last option, then you need to get a decorative mastic-contour to create an imitation metal frame. To ensure even distribution of paint over the glass surface, work with stained-glass windows must be done in the “horizontal” position. As soon as the stained-glass window dries, we insert it into the panel and fix it with glazing beads.

Decoupage

Thanks to decoupage, it is possible to create without much investment attractive design doors. To decorate an old door using a similar technique, you only need napkins with the desired pattern, 200 ml PVA glue, a brush (preferably made of natural bristles) and acrylic varnish.

The canvas must be prepared - primed and painted in desired color. Once the paint is dry, you can start decorating. At napkins, we separate the layer on which the drawing is depicted and tear it lengthwise into two parts.

Napkins with the image are torn lengthwise into three strips. The edge should be slightly uneven. Set aside strips with smooth edges for now. We tear the middle part of the napkin into squares with sides of about 3-4 centimeters.

In a small container, dilute PVA glue in water. The proportions should be about 50/50. Let's start decorating.

We apply a strip with one flat edge. Using a brush dipped in glue, smooth out the fragments. The resulting folds provide the texture of the finish. In the work, it must be borne in mind that wet wipes are quite elastic and gentle.

With a brush dipped in glue, you need to work carefully. Step by step we create a frame with one even, and the second torn edge. We fill the middle of the frame with squares from napkins in the same way.

DIY door decor is almost complete. For any difficulties, focus on the photo in our article. Let the finished surface dry. In about a day we cover the decor acrylic varnish. The varnish must be water-based, then it has no smell. With a minimum of material costs, we get a beautiful door surface.