Wall panels for the corridor - stylish interiors for any budget! Recommendations for finishing the corridor with mdf panels

A creative approach to a fascinating but serious repair procedure is welcome. But for this you need to arm yourself with the appropriate knowledge and experience. As they say wise people: only a fool learns from his mistakes

x, and the smart one uses someone else's experience. Tips & Tricks experienced craftsmen are always useful, especially if the conversation is about the walls in the hallway, finishes, photos. By listening to wise advice, you can reduce costs and competently organize the process.

3d panels in the design of the walls of the hallway

In terms of traffic, the entrance hall is not inferior to either the kitchen or the toilet. Keep this in mind when preparing for repairs. The material for the walls in the hallway must meet the following requirements:

On the market building materials the range of finishing products is huge. It is difficult to stop your choice on anything specific. Do not be upset about this, there is always a way out. So, for example, a successful combination of textures looks quite interesting and provides rich food for design minds.

Prompt! The possibility of improvement is the main selection criterion. The walls in the hallway are regularly exposed from the outside. Therefore, in case of serious damage to the plane, it is better and cheaper to repair it than to replace it.

A lot of alternative variations are offered, wall decoration in the hallway. In order for the finish to be of high quality and look beautiful, it is recommended that you familiarize yourself with the photographs and choose your own, original way. Before you opt for one or another coverage, it is worth considering individual characteristics premises, microclimate, financial possibilities, general style interior. It is not advisable to use delicate types of coatings, as the surface will quickly lose its presentable appearance.

Before choosing one or another coating, it is worth considering the individual characteristics of the room, the microclimate, financial capabilities, and the general style of the interior.

What will be the decoration of the walls in the hallway - a matter of personal preference. But in order not to be mistaken, you need to familiarize yourself in detail with each type of finish separately.

Prompt! Before the beginning finishing works, the surface of the walls must be carefully prepared, responsibly approaching the implementation of each stage.

Decorative plaster - practicality and convenience

A popular finish option allows you to get a certain relief, color or pattern. A variety of texture fillers makes it possible to profitably present color scheme, for example, marbled, or an unusual relief pattern. The advantages of the material are obvious:

The possibilities of this type of coverage are truly endless. Thanks to the graininess of the plaster, you can achieve a beautiful effect for any design idea. But the material should be applied only on ideal flat surface. Otherwise, the wall will not look beautiful, every defect of the previous repair stage will be revealed.

Prompt! Decorative plaster is not as easy to work with as it might seem. Only an experienced professional can complete the finish with high quality and without errors.

Thanks to the graininess of the plaster, you can achieve a beautiful effect for any design idea.

Paint - simplicity and affordability

Even an inexperienced person can paint a room with paint. For this type of work, special decorative compositions which are easy to apply and hold well. They are divided into categories:

The budget option of finishing, in addition to obvious advantages, has some disadvantages.

Prompt! Ventilate the room frequently while working and protect the freshly painted object from damage.

Even an inexperienced person can paint a room with paint

Wallpaper - classic

Adherents of the classics like wallpapers the most. This is understandable, because no other type of finish has such a variety of patterns, textures, colors. Furthermore, different kinds wallpapers are perfectly combined with each other. This makes it possible to implement the most bold ideas, making out not only the walls, but also the ceiling.
Wallpaper hides surface defects well, is resistant to wear and is easy to clean. The modern assortment is amazing. Wallpapers are:

vinyl;
non-woven;
liquid;
cork;
photo wallpaper;
paper;
glass wall papers.

The latter view, according to experts, is unsuitable for the walls of the hallway.

Prompt! If cats or dogs live in the apartment, then it is better not to use wallpaper. Animals can tear them apart and bring all the work to naught, it will not be possible to restore the spoiled.

Wallpaper hides surface defects well, is resistant to wear and is easy to clean

Wall panels - strength and durability

The composite is ideal for wall decoration in the hallway and in the corridor. The benefits of coverage are hard to underestimate:

Price for this species finishing depends on the materials that went into production:

Wall panels are produced in the form of rails, plates and sheets. On sale, products are accompanied by a molding, with which they hide the seams and joints of parts.

Prompt! The panels are not afraid of moisture, are resistant to mechanical damage and are very durable, because guarantee period use is 15 years. You can place panels on the wall in different ways: vertically, horizontally, at an angle.

Wall panels are produced in the form of rails, plates and sheets

Laminate - simplicity and reliability

An analogue of the previous option is a laminate. In terms of performance, it is not inferior to competing finishing materials. Main advantages:

It is also not necessary to prepare the walls for the laminate.

Prompt! In rooms where high humidity, laminate can not be used. In damp rooms, the material is deformed, defects cannot be eliminated.

Decorative stone - environmental friendliness and luxury

Wall decoration with stone is an expensive pleasure. Decor is used in combination with other types of finishing materials. Artificial stone is quite durable, not much different from natural. One can talk endlessly about its aesthetic merits. The entrance hall, decorated with stone, looks amazing. The production is based on gypsum, so the stone is considered an environmentally friendly material.

The entrance hall, decorated with stone, looks amazing

The lower part of the wall in the hallway is trimmed with stone. This place is most prone to wear and tear: household members touch their shoes, large-sized items, such as a bicycle or stroller, leave scratches everywhere. A stone wall will serve you for a long time and faithfully. In addition, if desired, it can be painted, the relief surface will retain an attractive appearance. Repairing or replacing the damaged area is also not difficult.

Prompt! To finish the wall with stone, a smooth and smooth surface otherwise, it is extremely difficult to join the elements. The wall will turn out uneven, with steps on the surface.

Tiles - moisture resistance and savings

An old and time-tested way of finishing. Ceramic tiles have the following advantages:

High performance will allow you not to think about repairs in the hallway for many years. In rooms where regularly high humidity and sudden changes in temperature, tiles are indispensable. The tile washes well, the pattern is not overwritten, plus: glossy surface visually enlarges the space.

Prompt! Tiles are difficult to combine with other types of finishing materials. Treats the material as decorative coating walls, should be very delicate.

An old and time-tested way of finishing.

Frescoes - grace and originality

For those who prefer unique species finishes, you will like the entrance hall, decorated with frescoes. Truly rich and original looks architectural painting on the wall. Such a hallway will become the subject of secret envy of friends and acquaintances. Walls with frescoes clearly emphasize the originality of thinking and the refined taste of the owner of the house. Elegance, the transition from stereotypes to creativity, quality - these are just some of the aesthetic advantages.
The disadvantages of this finishing material:

high price;
complexity of execution.

Frescoes have several types of bases:

non-woven;
synthetic;
interspersed with plaster or marble chips.

The effect of antiquity is achieved due to the cracked pattern and texture chips. The desire to decorate the walls with frescoes is an expression of a romantic mood, a creative nature.

Prompt! It is quite difficult to make frescoes on your own, it is special technology. And, even an inexperienced home master can decorate the walls with ready-made frescoes.

Conclusion

Choosing a wall covering in the hallway is not difficult. It's a matter of taste. And, taking into account the nuances: the microclimate of housing, indicators of humidity, the quality of finishing materials, it is possible to profitably reduce the time and financial costs. The ability to combine, design and fantasize is useful in any situation. Dare and experiment!

Wall decoration options in the hallway

Walls in the hallway 47 photos of finishing options:

The walls in the corridor are more prone to dirt and damage than in other rooms. And if there are pets and young children, then the issue of preserving the finish of the corridor is of particular importance.
Taking into account the fact that the entrance hall is the face of the apartment, the following requirements are imposed on the finishing materials of the entrance hall and corridor:

As with any material, it has its advantages and disadvantages.

Plastic panels

PVC panels (polyvinyl chloride) are completely artificial material. It does not contain asbestos and cadmium.
Its cellular structure will provide you with good sound insulation:

A variety of colors and patterns will help bring yours to life.
Protective covering provide resistance to sunlight.
Finishing with plastic panels is possible in rooms with high humidity.
The surface of the panel is easy to clean and completely hygienic.
Due to their artificial origin, it is not recommended to use them indoors.

Finishing the corridor with MDF wall panels

MDF panels are made from wood dust and fine chips, which are compressed under high pressure and high temperature:

The thickness of the panel is up to 16 mm and looks like wood.

MDF panels are easy to cut, they do not break or crumble.
Significantly increase the sound and heat insulation of the room.
Moisture resistant panels are available. Moisture-resistant impregnation is indicated by the image of a drop of water on the package.
Panels are also available with refractory impregnation.
Any room in the apartment can be finished with such panels, but they look most spectacular when decorating a corridor or hallway (see).

Finishing the corridor with natural wood panels

by the most expensive material for the manufacture of panels is wood hard rock and wood veneered natural wood.
For the manufacture of wooden panels goes:

oak;
beech;
alder;
ash;
cedar;
maple;
Pine.

To give resistance to moisture and fire prefabricated panels impregnated with the appropriate preparations:

In a veneered panel, the main layer is made from the cheapest wood - pine. Veneer is glued to it in 2 or 3 layers. The front layer is glued from fine wood veneer.
All these layers are fastened together by hot pressing.
Then the panel is polished and coated with wax, paint or varnish.
Wealthy people can afford to order panels made of 100% hard and precious woods with subsequent polishing.

Natural wood panels look very noble and impressive at the entrance to the room, whether it is an apartment or a country house.

Fibreboard (MDF) is made from wood fibers by hot pressing. As a result of action high temperatures and pressure, lignin is released from wood fibers.
It's an organic binder. And therefore, in the manufacture of fiberboard, no synthetic binders are used.
For the production of fiberboard, you can use other fibers of plant origin:

Panels made from wood fiber boards are environmentally friendly and completely harmless to health. They can be used in residential areas. They are easy to clean and are not very afraid of moisture.

Fiberboard panels will look great when decorating and in the hallway.

Do-it-yourself installation of wall panels

Now let's look at how to mount wall panels for the interior decoration of the corridor with your own hands.
Depending on the quality of the walls and the material from which the wall panel is made, they can be fixed in various ways:

On glue, directly on the wall, you can mount the panels if the wall is perfectly flat and the panels are not very heavy. These are panels made of fiberboard and MDF.
In this case, the adhesive is applied to the entire surface of the panel in a zigzag pattern. After that, the panel is pressed against the wall.
The adhesive must have elastic characteristics and not interfere with the thermal expansion of the panel.
The method of gluing the panel to the crate has not found wide application due to its fragility. Therefore, it should be used as an addition to mechanical fastening.
The method of fastening the panel to the crate with self-tapping screws is very reliable, but it should be used in those rooms where there cannot be large fluctuations in temperature and humidity. The fact is that self-tapping screws do not allow the panels to expand with increasing temperature and humidity, and this leads to their deformation and warping.
There is another, the most common method - this is fastening the panel to the crate using clamps. With this method, the panel has free thermal expansion and is not deformed.

Before starting work on finishing the walls of the corridor, it is necessary to calculate the required amount of material. If you know the length and height of the walls of the room, then the store will help you calculate right amount all materials and fasteners.

Materials and tools

You will need:

MDF panels;
wooden beam 20x40 mm;
finite elements;
dowels and screws;
kleimers;
glue "liquid nails";
nails 20 mm, for attaching kleimers;
drill with a perforator;
hammer;
Phillips screwdriver;
roulette;
level;
construction stapler, if you decide to staple the clamps

Panel installation

MDF panels are attached to the crate, which is assembled from wooden bars measuring 20x40 mm.

Attention: if you want to mount the panels vertically, then the batten must be mounted horizontally. If the panels are horizontal, then the crate should be fixed vertically.

So:

Since the walls are uneven, with the help of a level and bars we eliminate irregularities, placing wedges where necessary.
We fix the first beam at a distance of 3-4 cm from the floor. The remaining bars are fixed at a distance of 50 cm from each other. We fix the upper beam at a distance of 3-4 cm from the ceiling.

Now we need to mount the first panel. You have to start from the corner. We set the panel according to the level strictly vertically and fix it on one side with self-tapping screws, and on the other hand we put a clamp and fix it with carnations or a construction stapler.

Important: if the first panel is installed with a slope, then the entire wall will go with a slope.
Only the first panel will need to be fixed with screws. The remaining panels are attached to the crate only with special brackets (kleimers).

We insert the second panel into the groove of the first panel, and on the other hand, we fasten it with a clamp.

And in this way we collect panels on the entire wall.

You can adjust the panels in height using a jigsaw or a hacksaw for metal.
At the very end, we close all the joints formed between the panels and the ceiling, the panels and the floor with glued fittings.

We close the corners, both internal and external, with special fittings for glue "liquid nails". On our website you can read many more interesting various materials finishing and according to the rules of work.

October 4, 2016
Specialization: facade finishing, interior decoration, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Recently, the choice of finishing materials that can be used in the hallway has greatly increased. In particular, options such as decorating the hallway with decorative stone or plastic panels have become popular. To help you choose, below are some of the most interesting and practical ideas.

wall decoration

First of all, I will give options for wall decoration, since it is the choice wall materials usually raises the most questions. Of course, in principle, absolutely any coating can be used in the hallway. However, it should be borne in mind that the surfaces in this room are more susceptible to pollution than in other rooms, which is associated with increased traffic here and proximity to the street.

Therefore, when choosing how to decorate the walls in the hallway, it must be borne in mind that the materials must meet the following requirements:

abrasion resistance;
moisture resistance;
the possibility of wet cleaning;
resistance to temperature changes.

The following materials meet these requirements:

Below is the cost for some models of decorative stone from different manufacturers:

I must say that many people are interested in how to decorate the hallway with decorative stone? This procedure resembles the installation of conventional tiles and is carried out in the following sequence:

first of all, it is necessary to designate the location of the stone and outline them with a pencil;
then the finish coating is removed, for example, the wallpaper can be cut sharp, and then removed with a spatula;

the prepared section of the wall must be washed and primed. Let me remind you that the primer is applied in two passes in thin even layers. For these purposes, you can use paint roller or brush;
now you need to apply tile adhesive to back side stone, and then press it against the wall.

According to this principle, the entire area is pasted over with natural or artificial stone. The only thing, during installation, make sure that the seams of the tiles do not coincide horizontally and vertically.

Option 2: decorative brick

Decorative brick, in fact, is the same decorative rock, but in the form rectangular tiles. This coating has the same performance and the same cost as fake diamond, so we will not consider it in detail.

The only thing to note is that decorative brick, unlike stone, is glued to the wall in the form of masonry. Moreover, it should be laid carefully, maintaining a certain thickness of the seams. Therefore, the installation instructions for this material are more complicated.

Option 3: decorative plaster

This finishing option is the cheapest, but at the same time it allows you to get an original and attractive wall surface. And there are a lot of design options. The fact is that plaster can have the most different texture Plus, it can be dyed.

Also you can use textured paint, which also allows you to decorate the walls with various textured patterns. Among the advantages of such a finish, the following points can be distinguished:

quickly and easily applied;
allows you to finish the walls of complex geometric shapes;
plaster is less demanding on surface preparation than ordinary paint;
big choice types of surfaces - plaster can imitate marble, silk, sand, etc.;
the coating is resistant to abrasion and other negative influences, due to which the wall decoration in the hallway textured plaster turns out to be quite durable.

Recently, "liquid wallpaper" has been popular, however, it can hardly be called good choice for the hallway, as this coating is unstable to moisture. The only thing to solve the problem is to open the "liquid wallpaper" with varnish.

As mentioned above, decorative plaster is inexpensive material, with the exception of some individual formulations. Below is the cost of a mixture from well-known manufacturers on our market:

The consumption of decorative plaster depends on the grain size of the filler. As a rule, this indicator is indicated on the packaging, so you should pay attention to it when buying coverage.

Option 4: plastic panels

Sheathing the hallway with PVC panels has recently been very popular, which is due to a number of advantages of this coating:

practicality - the panels are easy to clean, resistant to mechanical influences, temperature differences, etc.;
there is a large choice of design - there are different colors, can imitate various types of wood and all kinds of materials, up to marble or even tiles. Thanks to this, they fit well into almost any style of interior;
do not require wall preparation and are easy to install. On our portal you can find detailed information how to decorate the walls with plastic panels;
low cost compared to many other finishing materials.

It should be noted that the installation of plastic panels can be done in two ways:

on glue - suitable for finishing even walls;
on - this method can be used if the walls are uneven or it is necessary to hide communications under the skin.

Plastic panels can be combined with other materials, for example, the lower part of the walls can be sheathed with plastic, and the upper part can be pasted over with wallpaper or covered with decorative plaster.

Below is the cost of some models of PVC panels:

Option 5: lining

An excellent option is to decorate the walls of the hallway with wood, for example, clapboard or block house. Among the main advantages of wood finishing materials, the following advantages can be distinguished:

environmental friendliness;
attractive appearance, which is able to give the room comfort;
fits well in almost any interior.

Of course, when choosing a natural material, keep in mind that it can crack over time and requires periodic maintenance.

If the entrance hall in the apartment is small, you can place the lining horizontally, as a result of which the stripes will visually expand the walls. The only thing to keep in mind is that in this case the ceiling will “fall”.

As for installation, the work is carried out in almost the same way as wall cladding - with plastic panels. Most often, fastening is performed on the crate.

The price of wood panels, of course, is higher than the cost plastic analogues- starts from 300-350 rubles per square meter.

Option 6: bamboo wallpaper

An excellent alternative to lining and block house are bamboo wallpapers, which are also an environmentally friendly material. They have an attractive appearance, and at the same time have many other advantages:

are strong and durable;
resistant to moisture and other negative influences;
fit well into various styles interior.

The only drawback of this material is the high cost - from 600 - 1300 rubles per running meter. Therefore, bamboo wallpapers are usually combined with other coatings. Often they paste over the lower part of the walls or highlight them with their help. separate zones hallway.

painted wallpaper

Option 7: paintable wallpaper

interesting modern solution, which allows you to decorate the hallway in an apartment or house, are wallpaper for painting. Front regular painting walls they have a number of advantages:

allow you to decorate the walls with a beautiful texture;
wallpaper is less demanding on the preparation of walls than paint;
it is possible to repaint the surface, while maintaining the texture;
cullets for painting perform the function of reinforcement, as a result of which they strengthen the finish and tighten small cracks in the plaster. True, this does not apply to vinyl paintings.

I must say that the wallpaper itself for painting is well tolerated by moisture. However, in order to be able to wet cleaning, it is necessary to paint them with moisture resistant paint.

As for the cost, paintable wallpaper in general is available material. Their price starts from 700-750 rubles per roll. Of course there are elite coatings, the cost of which reaches several thousand rubles per roll.

Choosing how to finish the hallway, you can not help but consider classic version- Pasting it with wallpaper. Of course, when choosing canvases, it should be borne in mind that they must meet the above requirements.

Therefore, it is best suited for these purposes vinyl coverings. They tolerate wet cleaning well and are strong enough to withstand mechanical stress. Another advantage of vinyl wallpaper is a large selection of designs, so you can choose them for any interior.

The only thing to keep in mind is that this material still requires a more careful attitude than, for example, wall panels. Therefore, it makes sense to combine vinyl wallpapers with stronger materials.

If the hallway in the house or apartment is small, it is better to give preference to light coatings. If the hallway is large enough, you can use contrasting materials.
An example of the use of tiles in the hallway

A few words about flooring
The choice of flooring is usually less challenging task than the choice of wall materials. The main thing is that the floor covering visually harmonizes with the wall decoration, as well as easy to clean and withstand heavy mechanical stress.

Therefore, in this room you can use:

linoleum;

laminate;

tile;

parquet.

In fact, you can lay almost any floor coverings which are used in houses and apartments. The only thing is that it is desirable that the wear resistance class of the material be sufficiently high, designed for high room traffic.

As for the ceiling, there are no special requirements for the coating, so you should focus only on the desired design of the room.

Output

All of the above materials are suitable for use in the hallway. Therefore, when choosing, you should focus on the design of the room, your own wishes and, of course, financial capabilities.

For more information, see the video in this article. If you have any questions regarding certain finishing materials, ask them in the comments, and I will be happy to answer you.
October 4, 2016
If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

No. 3. Microcement

Microcement is a material that has recently appeared on the construction market. According to a number of properties, it can be classified as decorative plasters, but the outstanding performance makes it worth considering separately. The material consists of a polymer-cement mixture, to which dyes are added.

The main advantage of microcement- the ability to apply it on any base: on wood and metal, such a finish will be equally strong. In addition, using microcement, you can create a smooth, rough, matte or embossed surface. Due to the structure of the material, any color turns out to be natural, as it is slightly muted. The wall finished with microcement is durable, it is not amenable to mechanical stress, so for the hallway it is easy perfect option, especially since at a cost it will cost less than conventional decorative plasters.

No. 4. Wallpaper

Despite the existence of many types of modern finishing materials, wallpapers continue to be actively used everywhere, incl. . Of course, they are not suitable for this room, but new types of wallpaper with interesting properties have appeared, and the range has expanded so much that it will not be difficult to choose a material that is suitable for its characteristics and colors.

No. 6. MDF panels

No. 7. Fake diamond

Artificial stone is made on the basis of gypsum, so we can talk about the environmental friendliness and safety of the material. Modern technologies allow you to create exact copies of such natural stones, like marble, onyx, granite and many others, but at the same time they are lighter and cheaper. According to the main properties, artificial stone is practically not inferior to natural, and its advantages include:

No. 8. flexible stone

Not so long ago it appeared on sale, therefore it has not yet gained sufficient popularity, and many simply do not know about its existence and advantages. This natural material, which can even be used for finishing facades, which indicates strength, resistance to wear and moisture. A flexible sandstone-based stone is produced, which is applied to fiberglass. Thus, finishing material is obtained in the form of plates and wallpapers, whose main advantages are:

environmental friendliness and safety;
ease of installation;
resistance to moisture and fire;
ease of care;
durability. Experts say that the material will last at least 35 years;
Since the flexible stone is plastic, it can take on completely unexpected configurations, thanks to which the most unexpected solutions can be realized.

Of the minuses, it is worth mentioning only the price, which remains at the level natural stone, but durability and exceptional performance comes at a price.

or but given material with a successful selection, it will perfectly fit into the interior of the hallway, and only about its beautiful operational qualities and you don't have to speak. Among the main advantages ceramic tiles worth highlighting:

a huge range, so choose the material desired color and with a certain pattern it will not be difficult;
practicality, resistance to scratches, moisture and temperature extremes;
strength;
durability.

Today, there is a huge selection of ceramic tiles: they can even imitate wood, stone or leather, and therefore fit perfectly into the interior of the hallway. Moreover, for some interior styles, tiles are the main element of decor. So, it will look great in a hallway in style or country, while it is not at all necessary that all the walls - it is important that their lower part is well protected.

Finally

Since the entrance hall regularly suffers from the negative impacts associated with street dirt, it must be designed so that after any pollution it can be quickly put in order. First of all, it concerns the walls. The choice is complicated by the fact that the finishing material must also be attractive in appearance, correspond to the chosen style of the interior. Doesn't hurt to think a few suitable options and will stop at the one that will suit the maximum number of parameters. Do not forget about the possibility of combining some materials with each other, while achieving interesting design solutions.

Recently, more and more often you can find room decoration made with MDF panels. Moreover, they trim not only the walls, but also decorate the arches, doorways and ceiling. This option is popular for a reason, a variety of types of panels makes it possible to perform any design of the hallway. A huge variety of finishes using panels is simply amazing.

MDF panels are made up of environmentally friendly materials, in fact it is dust obtained from sawdust. Despite such a good natural composition, wall panels are used mainly for finishing the corridor.

The panels on the walls in the corridor have a wide variety of colors and textures, thanks to well-chosen color solutions the room looks great.

Panels can be mounted in several ways:

Diagonally in a single color or combined by several;
Vertically with a single height or in several panels and in different colors;
Horizontally with a combination of colors.

one more design solution is a combination of types of installation. The corridor with a horizontal and diagonal way of mounting panels looks very impressive. The panels can imitate wood or tiles, thanks to the special texture a visual effect is created. Caring for this type of finish is very simple - if necessary, just wipe with a damp cloth.

Types of panels in the corridor

As a rule, the walls of the corridor require finishing with materials that are easy to wet clean. The modern construction market offers a lot of variety of materials for finishing with good moisture resistant qualities.

Types of panels in the corridor:

PVC panels - easy to maintain, have a variety of colors;
MDF panels - ease of care directly depends on outer coating panels;
Sandwich panels - plastic sheets, easy to clean with plain water and a napkin;
Tambourat plates - three-layer plates made of MDF or chipboard with cellular cardboard inside;
Fiberboard, chipboard panels - a rather short-lived material, requires solid foundation walls.

When choosing MDF panels as a finishing material, it should be borne in mind that the main difference between the panels is the variety of coatings. The most impractical and at the same time cheap are panels with paper coated and drawing on it. More practical and at the same time expensive panels can be considered laminated or pasted over with wood veneer. Eurolight offers matt, glossy and glossy metallic panels with a thickness of 38 and 50 mm.

Big choice alternative solutions to decorate the room. environmentally friendly and universal materials for walls:

MDF panels: corridor in the apartment

The walls in the hallway are most susceptible various pollution. It is best to finish the corridor in the apartment with MDF panels. They have all the necessary properties for such small room. Wall panels allow you to finish as quickly as possible.

Main advantages of MDF panels:

The panels are moisture resistant, which allows for wet cleaning without fear of damaging the surface of the material;
There are fire resistant panels;
The surface of the walls is even after finishing with panels;
Panels increase thermal insulation;
The thickness of the panels is up to 16 mm, they minimally conceal square meters when finishing;
They are quite light and do not weigh down the structure.

Diversity is a definite plus. color shades, allowing maximum implementation in the interior of various design ideas.

MDF lining has locks along two sides for attaching panels to each other. There is a rare option where locks are also provided at the ends for splicing along the length. The shape of the panels can be square or rectangular view reminiscent of tiles.

Material on the types and methods of installing a ceiling from MDF panels will also be useful:

Hallway design with MDF panels

The design of the hallway with MDF panels can be made by a combination of various options.

Apart from color options, exist different types plastic panels:

Reminds me of wooden lining rack panels, their thickness is from 8 to 12 mm, height is 2.5 - 3 meters;
Mosaic compositions can be created using tiled panels, their thickness is 7 - 10 mm, and the length varies from variety to 1000 mm, such panels imitate tiles well;
The largest panels are sheet, their height is up to 3 meters, width up to 1.5 meters and thickness from 3 mm to 12 mm.

In addition, not the entire wall can be paneled. The corridor in the house looks original, lined with MDF panels up to half the wall. The options can be varied, for example - glue wallpaper on top, and MDF sheathing on the bottom, or upper part close the wall panels of MDF, and the lower PVC.

wall pvc panel slightly different from MDF, but cheaper, for the dirtier area of the wall near the floor plastic panels ideal if the design is chosen in a certain tone.

MDF panels come with 3D relief. They look very original in the decoration of the upper part of the wall. Modern technologies have made it possible to diversify MDF panels to the maximum, not only in terms of color and external characteristics.

Share this decorative material you can on:

MDFV;
Ordinary MDF;
Laminated;
Cork;
Veneered;
Fire resistant.

Ordinary MDF does not particularly resist moisture and damage. These panels are inexpensive and are best used in dry rooms. Laminated panels are relatively new to the market, but have gained popularity due to their resistance to damage. MDFV is moisture-resistant MDF with a protective layer against moisture, thanks to which the panels can be safely washed with water. panels are quite expensive, on their surface thin layer inflicted cork. Veneered panels are clean environmental materials, a cut of natural veneer is applied to their surface.

The combination of wallpaper and panels in the corridor

Corridors with high ceilings require special attention in design. A large volume needs to be filled somehow and the output will be the combination of wallpaper and panels in the corridor. This is a popular type of finish, and it is easy to do it yourself, and the ways of combining materials please the choice.

In addition, you can always experiment and come up with something completely new:

Horizontal stripe combination;
Vertical stripe combination;
Combining wallpaper inserts in some areas of the panels;
Combination of figures;
A combination of top-bottom, while the panels can be both above and below, although it is more reasonable to define the panels down.

Via combined finishes even very bold design ideas can be translated into reality. By using a variety of combination methods, you can create a truly unique interior hallway. Joints when separating the areas of wallpaper and panels should be decorated with moldings, borders or friezes.

Modern wall decoration in the hallway with MDF panels: photo

MDF panels quite often finish not only walls, but also ceilings. This material received popularity for its good finishing qualities. Panels are a good substitute for wood and at the same time imitate it very well.

You can often see paneling that is indistinguishable from wooden lining. For harmonious design hallway should be considered general interior the whole apartment.

Wall paneling is not appropriate in all rooms, and is more often used for finishing:

Corridors of apartments and houses;
On the kitchen;
On the loggia or balcony;
In a hostel when finishing common areas.

Decorative panels can be partially used for wall decoration in living rooms to highlight some design ideas. It should be noted that due to environmental friendliness, the material of the panels can still be used for complete finishing walls even in the bedrooms, but rarely does anyone create such an office style in a space designed for sleeping.

The better to finish PVC or MDF corridors with panels

The building materials market offers a huge selection wall panels. It is worth figuring out the better to finish the corridors with PVC or MDF panels. Sometimes the differences between them do not play a big role, but it is still worth knowing them.

PVC panels:

Consist of plastic;
May be harmful, evaporating substances when heated;
They are inexpensive;
Moisture resistant;
Perfectly smooth;
Resistant to damage;
Used for walls and ceilings.

PVC panels have many good qualities, they are well suited for installation in damp rooms and corridors, precisely because of the ability to wash the panels if necessary.

MDF panels:

Consist of pressed sawdust;
Do not harm health;
Acceptable price of some types;
Not all types are moisture resistant;
The surface can be either flat or embossed;
Not all species are sufficiently resistant to damage;
Used for walls, rarely ceilings.

As you can see, panels made of both materials are quite affordable, the surfaces finished with them are smooth. Color palette just as varied, a noticeable difference is the composition of the panels.

For people who prefer naturalness, MDF panels are more suitable for finishing the corridor. MDF panels are less often used for ceilings and for a corridor it is quite possible to combine MDF walls with a PVC ceiling.

Finishing the hallway with plastic panels: design and photo

Plastic panels are one of the hallway options. They are widely used in office and residential premises, have a lot of advantages. With the help of plastic panels, you can quickly give the surfaces a smooth and decorative look. Installation can be done independently, without resorting to the services of specialists.

Finishing the hallway with plastic panels can be combined with other materials:

Perfectly combined with MDF panels on the walls;
It is possible to combine a ceiling made of plastic, and walls made of MDF panels;
An excellent combination with wallpaper, both in half on the walls, and the ceiling - plastic, walls - wallpaper.

High-quality plastic panels are harmless to health, have high moisture resistance, are strong enough and durable. The panels fit well into the overall interior of the apartment and are perfectly combined with interior items.

How to panel a corridor

Paneling the corridor with your own hands is not difficult. Most often, the panels are mounted on a metal or wooden crate, however, if the surface of the walls is flat, the panels can be mounted without a frame by gluing liquid nails onto the glue.

Smooth walls are rare, and you should carefully familiarize yourself with the basics of mounting the frame:

Rails for the frame should be used at least 20 * 40 mm wide;
All frame parts must be installed using a level;
The distance between the rails must correspond to the dimensions of the panels.

The wall crate must be securely fastened, and it is better to fasten the panels to the crate with special hooks - clamps.

To frame the junction of the panels with the floor surface, it is necessary to make and fix the floor plinth, and ceiling plinths at the ceiling junction.

MDF panels - Corridor sheathing (video)

Installing MDF panels is quite easy and installation does not take much time. The finished result will not differ in any way from the work of professionals, if you follow all the technology and do not ignore the rules for attaching the entire structure. beautiful walls in the corridor will please their external qualities, thanks to good care and durable material.

Design and decoration of the hallway with MDF panels (photo examples)

Categories

Popular