Moisture resistant wall panels under a tile. Tile panels for walls

In most cases for wall decoration kitchen area people use ceramic tiles. But for a number of reasons, this is not always possible. Do not be upset, because today there are a large number of proposals on the construction market. One such option is sheet moisture-resistant panels that allow you to imitate tiles, natural stone. Thanks to this finish, it is possible to achieve amazing results and make all your fantasies come true. In addition, such material is not so expensive, but performance characteristics are at the top.

Varieties of moisture resistant wall panels

moisture resistant sheet panels can be presented in the following varieties: MDF, laminated under the stone. Let's dwell on each option in more detail.

MDF tiles

The presented products are actively used in interior decoration. The reason for this demand is the low cost and excellent performance. The dimensions of such a plate can reach up to 2 meters.

On the video - Waterproof Wall panels under the tile:

Among the advantages are the following:

High moisture resistance. But this advantage is achieved on the condition that the laminated panels will not be affected by moisture for a long time. Otherwise, the product will deteriorate and will need to be replaced.
Excellent sound insulation performance. This advantage is achieved thanks to high density. Also, to improve such qualities during the installation of the material, it is necessary to fill the resulting cavity between the panels with mineral insulation.
Long service life. When choosing a quality laminated panel, its decorative coating is no different in terms of strength from the coating, which has a floor laminate. But in order to achieve such dignity, several conditions must be observed: it is impossible to exert a mechanical influence on the product, scratch or cut sharp objects. Also, do not use panels when finishing. kitchen apron in working area.
Versatility. Of course, most manufacturers suggest using moisture-resistant laminated panels in the kitchen and bathroom, but they are allowed to be used to finish any room, regardless of its purpose.
Ease of installation. To carry out installation work, there is no need to call a friend for help or yell for services to a construction organization. You can do all the installation work yourself in a matter of hours.

What do wall panels look like? white brick can be seen in this

Stone walls

Such panels are presented in the form of a square and are used for finishing surfaces in rooms with increased level humidity. Sheet moisture resistant panels perfectly imitate natural stone, brick, tile, marble.

On the video - sheet moisture-resistant wall panels for the kitchen:

And other characteristics of the finishing material are indicated in this article.

Manufacturers and prices

In the construction market, sheet moisture-resistant panels are produced by many companies. Leading manufacturers are:

Wall panels are moisture resistant Georgia-Pacific. This product is considered high quality, perfectly resists moisture, as the material is coated with a melamine-based composition. The cost is 180 rubles.
Wall panel Wisla. The cost is 155 rubles.
Wall panel Lusitania. The cost of the product is 160 rubles.
Wall panel Gnauf- the cost is 140 rubles.
Wall panel Britain- the cost is 155 rubles.

Moisture-proof sheet panels are best option for those who want to keep cash and to get quality finish of your premises.

Tiled bathroom panels, whose photos have flooded the Internet and the covers of interior decor magazines, have become popular in our country relatively recently.

Types of wall panels

All decorative wall panels used for interior cladding of rooms with high humidity and temperature differences are represented by different types:

PVC moisture resistant panels;
wood fiber boards with a water-repellent coating;
composite chipboard multilayer boards.

The plastic version is the most inexpensive and absolutely moisture resistant, but is characterized by insufficient strength indicators.

Moisture-resistant MDF wall panels are more expensive than PVC, but differ increased strength. They belong to the category of popular soundproof and heat-insulating materials, characterized by high fire resistance and hygiene. Such a finish will be environmentally friendly and completely safe for others.

PVC panels in the bathroom after installation

Choosing finishing material as moisture resistant panels, you should decide on the dimensions of the elements:

rack panels have a width of 12.5-30.0 cm with a length of not more than 370 cm;
tile panels have maximum length sides 98 cm;
sheet panels allow, with the help of one element, to cover an area of 2.44x1.22 m.

It is tile panels that best imitate ceramic surface, so they are worthy alternative traditional tiles and modern porcelain stoneware.

Square tile panels are characterized by a strict shape, convenient for different layouts, including alternating shades or shaping unusual pattern, which allows you to diversify the design of the bathroom.

Bathroom paneling is becoming more and more popular, because it is inexpensive, and the material is durable. - how to choose? Read helpful tips.

Do you want to paint the ceiling in the bathroom? Read about how to choose the right paint.

All about pros and cons cast iron bathtubs with hydromassage read .

material requirements

The bathroom is a room, the interior and design of which should be not only aesthetic, but also comfortable and practical in terms of regular use.

It is for this reason that some characteristics and properties of the materials used for wall decoration become a priority:

moisture resistance indicators. Wall cladding in the bathroom is exposed to excess moisture, so the finishing material should not soak or swell when in contact with water.
The level of resistance to temperature changes. The surface of the walls regularly experiences a negative change in the microclimate, including sudden changes in temperature. Therefore, insufficiently stable finishing materials can be deformed.
indicators of hygiene. The surface of the walls in the bathroom is in direct contact with the owners of the premises in the process of their implementation water procedures therefore, the health of others directly depends on the ability to maintain the cleanliness of the finish.

Quality cladding material can withstand frequent washing and regular cleaning using chemical reagents. The finish used should not emit toxic or allergenic substances that can cause poisoning, as well as cause irritation to the mucous membranes or skin.

Panels on the walls

Among other things, when choosing a material, you need to carefully examine the surface of the panels at a right angle, which will allow you to detect the presence of even minor defects or roughness.

The water-repellent film on the surface should not have yellowness, as this may indicate improper storage of the panels or the use of a low-quality protective composition in the manufacturing process.

Plastic panels, often used to solve problems in bathroom cladding, have a high coefficient of thermal expansion, but following the installation rules allows you to compensate for even significant deformations.

Plastic features

Wall plastic panels used for cladding a room with high level humidity, have large quantity undeniable advantages presented by:

Ease of self-assembly. Plastic finishing panels easily and fairly quickly installed with your own hands, without involvement in the implementation facing works skilled and expensive craftsmen. Plastic can be mounted on any surface without laborious pre-training.
Affordable cost of finishing material and components. Due to its low price, plastic is one of the most popular and most budgetary facing panels for the bathroom.
Reliability and guaranteed practicality. plastic surface characterized by resistance to moisture and fungal infections. PVC bathroom tile panels are suitable for repeated installation and dismantling, which is convenient for reuse. Surface resistant to fading sun rays and for a long time retains its original aesthetic appearance.
Wide choice of textures and colors. A variety of colors and shades will make it easy to realize the most original designs and bold design solutions. The most modern plastics perfectly imitate the texture of wood and stone, fabrics or leather;
Increased moisture resistance. PVC wall panels protected from deformation and soaking under frequent exposure to water.

Despite the very large number of advantages, when choosing plastic as a wall finish, you need to take into account the disadvantages of such a facing material:

PVC panels are not among the environmentally friendly materials, due to the composition of the feedstock. When burning such material, severe poisoning can be obtained, so the use of plastic in residential premises is at least undesirable.
low-quality plastic trim panels from poorly-established manufacturers are capable of emitting specific unpleasant odors, and also do not have sufficient resistance to temperature extremes.

Along with other plastics, PVC panels have insufficiently high strength indicators, therefore, with a noticeable mechanical action receive damage. However, in this case, it is sufficient to simply replace the deformed element.

Imitation tiles in the bathroom

Plastic wall panels that imitate traditional tiles are an excellent alternative to ceramic cladding in the bathroom and toilet rooms. Standard dimensions of most waterproof decorative PVC wall panels:

length - 2.5-3.0 m;
width - 25-30 cm;
thickness - 0.5-1.0 mm.

Panels imitating tiles can be used for both wall and ceiling decoration. Elements are mounted using liquid nails or special plastic guides.

Finishing - imitation under a tile

The main advantages of modern facing plastics for bathrooms are presented:

high level of color rendering;
realism of the image applied on the surface of the panels;
increased resistance to direct sunlight;
a wide selection of colors, patterns and patterns;
visual expansion of a small space.

Bathroom interior - interesting option panel selection

The level of practicality and high quality characteristics modern finishing plastic panels are not in doubt, and their use in the cladding of rooms with a high level of humidity has the following positive aspects:

the low weight of PVC panels facilitates and speeds up do-it-yourself installation;
installation of finishing elements is not accompanied by accumulation a large number construction debris or dirt;
protective outer layer protects the finished surface from scratches;
care decorative trim during operation is carried out using the most simple and common detergents.

Traditional bathroom wall tiles are not the only possible variant wall cladding. - an affordable alternative to tiles, and in terms of design, it is not much inferior to more expensive material.

If it is impossible to install a free-standing bidet in your bathroom, it will take over all the functions.

Price plastic trim available to a wide range of consumers. With the right choice of material and the observance of the installation technology, plastic panels that imitate tiling can serve for an almost unlimited period, while maintaining their original external attractiveness.

A photo

bathroom design option

Tile panels - design option

Brown finish example

Peculiarities

A standard panel with a “tile-like” effect has dimensions of 122x244 cm; for aprons, sheets are specially made twice as narrow so as not to cut and waste the material in vain. At the same time, even a very large slab with an area of almost 3 m 2 has a minimum weight (10-14 kg) and can be attached to any base without any restrictions. As a rule, these are MDF panels (in budget option- High density fiberboard) with a thickness of only 3-6 mm. But they come with water-repellent impregnations and an additional protective coating of melamine or plastic.

Simply put, the wall panel is completely and does not deform under its influence, so it is the right place for it in the working area of \u200b\u200bthe kitchen. And it is almost impossible to distinguish it from luxurious ceramics - even “live”, even in a photo. The reason is that manufacturers of a budget analogue of tile for decorating their panels choose patterns and effects embodied in expensive collections of ceramic cladding. Although the clearly marked seams turn out to be too perfect, which, upon close examination, betrays a fake.

The main advantages of sheet panels:

Low cost - any plate for an apron or main wall will cost about 1800-2300 rubles. Products Russian production and even cheaper - quite nice models can be found for 350-800 rubles per sheet.
Speed and ease of installation/dismantling - all thanks to the relatively low weight and large area coatings.
Resistant to decay, fungus and mold - protective film wall panel does not just decorate it with applied drawings and photos. Due to its absolute waterproofness and lack of pores, it also does not allow moisture to accumulate on the surface of the plate, so that microorganisms do not take root here.
The ability to hide some surface defects. Of course, the base should be at least slightly leveled before gluing the wall panels, but it does not need to be brought to an ideal state. The main thing is that decorative surface will be absolutely smooth, and small flaws under it will hide a layer of glue.
Impact resistance and flexibility - here sheet panels have lost their nose to ceramic tiles themselves, which do not have such properties. Of course, a dent may appear on the skin from a strong blow, but not a crack, as on a tile.
Ease of processing - cutting, sawing, drilling wall panels, although undesirable, but still possible. The main thing after that is to lubricate the cut with a sealant so as not to let moisture in.
Service life - not less than 10 years.

However, it must be remembered that pressed materials such as MDF or fiberboard are subject to slight thermal expansion, which becomes noticeable with large board dimensions. To compensate for it, it is recommended to cut and mount the trim elements not in size, but leaving a 5 mm gap between the ends of the sheet and the floor / ceiling. Between the edges of adjacent panels, it is also necessary to provide thermal seams with a width of at least 1-1.5 mm.

But the care of the finished lining of the kitchen is not difficult. You just need to wipe the plates from time to time soft cloth made of microfiber soaked in dishwashing detergent. The main thing is not to use abrasives and a metal scraper - such rough cleaning hurt protective covering panels and will give water access to compressed wood fibers, which will significantly reduce the life of the wall finish.

Mounting

First of all, sheet panels for tiles need to be acclimatized indoors. To do this, they are unpacked and divided into separate sheets (ideally, the plates should not touch each other during the "rest"). In this position, they are left in the kitchen for a day or two. Before the beginning installation work required MDF panels:

Level as much as possible by filling up large pits, cracks and cracks;
Remove dirt and dust;
Carefully measure and mark furniture modules, appliances, sockets and switches for fastening.

Panels can be cut using both manual circular saw, and a jigsaw (suitable here thin file for laminate) or a drywall knife. In the first case, an incision is made from the wrong side of the plate, in the second - from the front.

Sheet panels with a tile effect are simply glued to the base, so be sure to treat the surface with a primer - it will not allow the wall to draw water from adhesive solution, disrupting the process of its solidification. The slabs themselves can be glued as is, leaving expansion joints between them or closing the edges with special joint profiles and corner elements planted on a sealant.

Since each wall panel has large area, the application of glue on the reverse side is not carried out in a continuous layer, but according to a certain pattern. The main thing here is that the stains mounting solution were approximately the same distance from each other. In addition, a continuous strip of glue is necessarily applied around the perimeter, which ensures reliable fixation of the plate along the entire contour.

Then the panel under the tile is installed on the prepared place and pressed against the wall. To ensure a better fit, gently tap the entire surface with a rubber or wooden mallet, being careful not to damage the photo on the front side or leave a dent in the panel. To save time, you can immediately prepare spacers that will hold the slab in one position until the glue sets.

If earlier wall cladding was possible only with ceramic tiles, now the choice of finishes is very wide. There are many alternatives on the market today.

The most popular of them are moisture-resistant wall panels for MDF or PVC tiles. With the help of such solutions, the finishing of the kitchen or bathroom can be completed in a shorter time, and the installation of the product itself will be performed by any novice specialist.

Panel types

Outside chipboard covered with a dense moisture-repellent film

As a rule, all wall panels are made from the same material.

The base is made of fiberboard with various additives, the outer layer imitates expensive materials and is covered with a moisture-repellent shell.

Conventionally, all products can be divided into three types:

tiled;
rack;
sheet.

In the first type of panels, the pattern is made in the form of rectangles or squares of various geometries. Most often, such a panel is used for the kitchen and bathroom. As a rule, such sheets imitate ceramic tiles.

Rack panels are made of pvc material. Represent plastic elements, which are attached to each other with lamellas. Installation of the product is carried out using brackets in pre-prepared guides. Standard length finished panel up to 3 meters, and the width is from 0.14 to 0.3 m. Just like in the previous case, such panels are suitable for tiled kitchens.

Panels will create an aristocratic "natural" design

The most modern and attractive material is sheet wall panels. They imitate the ceramic surface with particular precision. Most often, the standard length of the finished panel is 2.44 m, and the width is 1.22 m. Installation is quick, simple and without the use of additional devices.

The very technology of manufacturing panels allows you to get a material with maximum strength and moisture protection. That is why the base is made of MDF or PVC, and the outer layer is covered thin layer melamine. All wall panels have a number of advantages, such as:

affordable cost of the product, unlike tiles;
high installation speed;
Coverage area of one sheet is about 3 square meters. m.;
sheet processing requires a minimum of tools;
the formation of a minimum amount of waste after cutting;
ease of installation;
the coating does not rot, resistant to fungus and mold;
practicality of the product, installation is carried out on any surface;
resistance to detergents;
ease of surface cleaning;
huge selection of colors.

Wall panels for tiles have an attractive appearance, excellent moisture resistance, are resistant to prolonged loads, shocks, bends, so they can be easily used in interior decoration instead of expensive ones. ceramic tiles. Of course, the strength characteristics are not comparable with tiles, but with correct operation the product will last more than 10 years.

Installation of wall panels

Installation starts from the corner front door

Before installing the sheets, it is required to completely free the surface from the previous wallpaper and old paint. Protruding parts or loose plaster must be removed. Then the surface should be cleaned of dust and dirt. A wet broom is suitable for such purposes.

If there are deep cracks in the wall, then they must be covered with plaster. Next preparatory stage is the primer of the walls with a roller or brush. The liquid itself must be selected depending on the coating material. If the soil layer deep penetration After the application is completely absorbed into the wall, then re-application is required. After all layers have dried, the surface is completely ready for finishing.

Before proceeding with the installation of wall sheets, they must be kept in a warm room for at least 2 days. Thus, the panels before installation will have a flat plane, and after installation they will not change their shape. If these conditions are not met and the wall sheets are installed immediately, then in a few days their joints will diverge.

After aging the sheets, we make them cutting. To do this, you need a tape measure, a metal sheet, a jigsaw, a ruler, a pencil. On the whole sheet, mark the dimensions necessary for installation and remove its extra parts. The rest of the sheets are cut in the same way.

The panels are installed in such a way that the cut parts are directed towards the ceiling, floor and corners, the sheets are joined together with factory seams. This is done so that the image on the visible part of the surface is uniform, and the joints are uniform without gaps. It is better to start installing the first sheet from the corner of the front door. Next, the sheets are adjusted to each other so that the overall pattern matches. For more information about installation, see this video:

Finish must dry for at least 12 hours

In no case is it recommended to nail the sheets to the wall with nails. The moisture-proof layer will be broken, which will lead to the rapid destruction of the panel from moisture from the inside. Wall sheets are attached to the wall with a special adhesive. There is nothing complicated in installation, all work can be done independently without the help of specialists.

In order for the wall panel to stick well, it must be smeared with glue on the back side. For this you need a spatula. A solution is applied over the entire plane with a layer of approximately 4 mm. Further jagged wide spatula carried out over the entire plane of the sheet, thereby removing excess glue. For gluing the product, it is necessary to press it against the wall along the entire plane. The rest of the sheets are installed in the same way. For more information about panel properties, see this video:

At the joints between adjacent panels, it is recommended to leave gaps of 1-2 mm, between windows, floor and ceiling up to 3 mm. Thus, swelling of the panels after the adhesive has dried can be avoided. The time of complete hardening of the adhesive solution is about 12 hours. If you install the panel under the bathroom tiles, then the joints between the sheets, as well as the joints, can be smeared with a colorless sealant. If this is not done, then moisture will accumulate on the inside of the MDF panel. As a result, the panel will begin to collapse from the inside, rot and fall off.

After complete drying, the joints of the wall sheets should be glued with moldings. Choose the color of the material in the same range with the tone of the wall panel. The final step is the installation of the floor and ceiling plinth.

A few decades ago, the most popular bathroom finishing material was considered tile. But today modern technologies offer her a worthy alternative - a tile made of polyvinyl chloride.

What are PVC panels for tiles in the bathroom, how to choose and install them, we will consider in more detail.

PVC wall tile for bathroom is a multi-layer panel having a inside profiled substrate with perforation, and from the front - a laminated coating. The polymer is processed high pressure, giving the workpiece a varied relief.

The material for the manufacture of such panels is polyvinyl chloride - a polymer with excellent performance

On the outside panels by means of lamination or thermal printing apply a decorative pattern. It is covered with a protective layer of glossy or matte varnish, which protects the image from abrasion and tarnishing.

This multi-stage treatment makes the polymer coating resistant to mechanical damage and UV radiation, and also improves its antistatic properties.

The image on the front side can be the most diverse. Products look interesting, the front side of which imitates various textures: marble, tile, wood.

On sale you can also find PVC bathroom panels imitation tiles, decorated with photo printing or 3D image

The surface sheathed with PVC panels looks neat and attractive. A variety of textures and colors allows you to choose an option for any interior design.

Depending on the purpose of PVC panels are divided into two types:

Wall - characterized by increased strength and the ability to withstand mechanical loads. The thickness of such plastic is greater, and the flexibility is lower.
Ceiling - differ in a small thickness of products and a high degree flexibility.

Minimum tile size square shape is 45.7 cm.

Depending on the method of attachment to the base surface, manufacturers distinguish three types of polymer coating:

self-adhesive tiles;
with fastening on assembly glue;
tiles with a lock connection.

On the ceiling and walls, such polymer tiles are practically indistinguishable from ceramic coating. A rich variety of shapes and color options for plates allows you to combine different textures for implementation. design solutions, which are quite difficult to implement if the same natural materials are used.

Plastic hinged structures easily hide the unevenness of the wall or ceiling base, it is convenient to hide wires and communications behind them

Covering yourself technical constructions and communications, polymer tile cladding allows you to leave open access to them in case of preventive maintenance or repair work.

Advantages and disadvantages of finishing material

The main advantage of PVC panels is moisture resistance. Due to the smooth surface, on which there are no pores, the panels practically do not retain moisture. This quality makes them a worthy alternative to the usual tiles.

Polymer tiles can last for decades, perfectly maintaining a presentable appearance and performance.

Many prudent owners choose a polymer material as a cladding because of its low cost. But apart from the low pvc prices bathroom wall tiles have many more undeniable advantages:

lightness of construction;
ease of installation;
versatility of application;
health safety;
resistance to temperature fluctuations ranging from -50 to +50°С.
creation of additional heat and sound insulation;
wide decorative possibilities.

The standard weight of one PVC lamella does not exceed about 1.5 kg/sq.m. A light weight material greatly simplifies the process of transportation and installation finished products. And the flexibility of the tile makes it easy to lay it on almost any surface.

PVC panels - versatile material, which can be safely used not only for cladding walls and ceilings, but also when creating screens for showers or for decorating window and door openings.

Absence on smooth surface pore makes the polymer invulnerable to mold and fungus, the colonies of which love to live in a humid environment

Due to the fact that in the production of the facing material components harmful to humans, such as phenol-formaldehyde resin, are not used, the coating does not emit toxic substances and does not pose a threat to health.

But plastic panels, like any finishing material, are not without drawbacks. Among the "cons" polymer material worth considering:

Insufficient impact resistance. The polymer is able to withstand minor loads, but with direct mechanical damage, deformations and dents can form on the surface.
Specific smell. Some users note that during the first few days from the moment the tiles are installed in the bathroom, bad smell plastic. But this disadvantage is typical only for low-quality products.

The basis for the manufacture of facing coating is synthetic material. And therefore polymer coating exposed to chemical solvents. This should be taken into account when choosing a finish care product.

Video review of the main types of tiles:

When choosing a facing material, be guided by the dimensions of the bathroom. To avoid overspending material, correlate the area of the sheathing with the size of the products. But at the same time, you need to make a small supply of material, since tiles will have to be cut to install in the corners.

When choosing a tile, consider the dimensions of the bathroom, guided by the rule that light shades give volume to a small room

The key points that you should focus on when choosing high-quality polymer tiles:

Material thickness. For wall cladding, it is worth choosing dense panels with a thickness of 2.5-3.5 mm. If you plan to finish the ceiling - choose "lightweight" options with a thickness of 1-2 mm.
profiled underlay. The strength of the tile, combined with elasticity, largely depends on the thickness of the profiled substrate and the balance layer. After all, their main task is to distribute the load and prevent thermal deformation.
Coating color uniformity. When creating colored tiles, some manufacturers do not add coloring pigment to polymer composition and paint on front side. This is fraught with the fact that the layer during operation will burn out faster and be easily scratched.

Inspecting the product, pay attention to the thickness of the front surface. Ideally, the balance layer and profiled substrate should not be visible through the outside.

To avoid discrepancies in color saturation and texture, it is necessary to choose polymer plates from the same batch

When buying a tile equipped with a tongue and groove system, it is advisable to try to connect the products together. The joint should turn out to be even, devoid of convolutions and deformations.

The subtleties and nuances of laying the coating

Due to the ideal geometry of the cladding being created, the installation of PVC tiles is quite simple. Even a novice master can cope with laying ready-made squares. And this process can hardly be called laying. After all, PVC tiles are glued rather than laid.

Choosing the right tools

In addition to buying the tile itself, you need to purchase a deep primer to improve adhesion and a mounting adhesive on which you will “plant” the coating.

From the tools for the work you need to prepare:

level;
perforator;
scissors or construction knife;
container for mixing glue;
notched trowel or brush;
rubber roller;
simple pencil;
roulette.

If you purchased not a self-adhesive tile, but one that is equipped with a tongue and groove system, you must also prepare materials for the crate: a metal profile with dowels or wooden slats with self-tapping screws.

To create a crate, it is most convenient to use a metal guide profile or thin wooden slats.

But since the crate will be installed in a room with high humidity, when planning to use wooden slats, they must first be treated with moisture-repellent impregnation.

It will protect the wood from moisture penetration and will prevent the formation of mold and fungi on its surface. With a significant curvature of the base, it should be leveled by applying a continuous layer of plaster.

Preparing the base for laying

It is impossible to achieve a presentable flat surface of the glued tiles without preliminary preparation of the base. The preparation of the base base includes such operations as removing the old delaminated coating, cleaning from dust and dirt.

If there are significant protrusions on the wall, they must be removed with a chisel or perforator, and large recesses should be covered with fresh plaster

The cleaned and leveled base is covered in two layers with a deep primer. In this case, the second layer is applied only after the first one has completely dried. Priming composition provide high strength glued nodes.

To create a crate, the slats are placed around the perimeter of the room, maintaining a step of 40 cm. Before fixing the crate, it must be aligned relative to the vertical and horizontal plane, guided by the building level.

Frame from metal profiles created using the same technology: UD is fixed around the perimeter working surface, and CD-profiles are placed across

The guide profiles are fixed to the wall with dowels.

To get the desired ornament from the tiles and avoid mistakes when laying them, you must first mark the work area using a level and a tape measure.

Laying work begins only after the complete drying of the second layer of primer. While the solution dries, the tiles are brought into the room and left so that the temperature of the material is equal to room temperature.

Sequence of laying lamellas

One of the conditions for installing PVC tiles is compliance temperature regime. The minimum allowable threshold is +18°C. Tiles are laid, starting from the center of the wall and gradually moving towards the corners, forming row after row. Laying tiles with a pattern is carried out from left to right, and the same type of products - in an arbitrary direction.

To mark the starting point for the start of laying, use a tape measure and a simple pencil to beat off the center of the wall with two perpendicular lines. The intersection point of the contours will act as a guideline from where to start laying. If necessary, to minimize the trimming of tiles in the corners, the center can be slightly shifted.

When installing plates on the crate, they should not be placed close to the floor and ceiling. AT finished construction there should be ventilation gaps that can be easily masked with decorative skirting boards.

Due to the wide variety of shapes and color options, when laying tiles, you can experiment by creating an original ornament or creating a semblance of a mosaic

To stick a self-adhesive tile to the wall, the protective paper is removed from the back of the product, after which it is applied to the surface with the sticky side.

Using a coating on which the glue must be applied independently, the work is performed in the following sequence:

The element is turned upside down.
On the back side using a notched trowel or a wide brush, apply a thin layer of glue.
An element with an even layer of glue applied to it is applied to the wall.

Installation of plates equipped with a tongue-and-groove system is carried out by fixing to the frame using self-tapping screws. Having installed the first tile, the second element is “started” and the lock is snapped into place.

After gluing each panel, it is necessary to expel air from under it. This can be done with a rubber roller, rolling it over the cladding with little effort. Excess glue released when pressing the roller on the outer coating must be carefully removed with a clerical knife. Do not wipe the remaining glue with a napkin - this can only aggravate the situation.

You need to expel the air after gluing each tile, otherwise it will not adhere well and the coating will soon come off

When laying tiles, it is important to ensure that the side edges of adjacent elements fit snugly against each other. Ideally, after completion of work at the joints, no seams should be visible.

Compliance with this condition is important not only from the aesthetic side, but also from the practical side. The seams between the joints of the cladding of a room that is characterized by high humidity can act as potential sources of moisture penetration under the cladding. And this is fraught with the spread of fungi and the appearance of an unpleasant smell of "dampness".

If trimming of tiles is necessary, then it is performed at the installation site using scissors or a construction knife. To soften a coating that is too thick and thereby facilitate cutting, a building hair dryer is used.

Video installation guide:

On the setting of the adhesive, on average, it takes up to three days. After this period, the surface can only be wiped with a cloth moistened with soapy water, rinse with clean water and wipe dry.

Due to the excellent moisture resistance of the material, it is quite easy to care for it. The finished surface is easy to clean. Any minor contamination is removed with a cloth dipped in soapy water.

The main thing in caring for polymer tiles- handle it carefully weak points", that is, the joints of the side faces

To remove dirt stains, you can use cleaning compounds that do not contain abrasive components.

In case of subsequent installation of plumbing accessories - lamps, hooks and heated towel rails in PVC panels You can always drill mounting holes.

Modern finish pvc tiles able to transform the interior of the bathroom. The main thing is to show a little imagination when arranging, competently approach the solution of the issue and use only high-quality materials.

Categories

Popular